Reversible Thermoresponsive Plasmonic Core‐Satellite Nanostructures That Exhibit Both Expansion and Contraction (UCST and LCST)

H-bond-type thermo-responsive schizophrenic copolymers: The phase transition correlation with their parent polymers and the improved protein co-assembly ability

Schizophrenic copolymers are one type of the popular smart polymers that show invertible colloidal structures in response to temperature stimulus. However, the lack of principles to predict the phase transition temperature of a schizophrenic copolymer from its corresponding parent thermo-responsive polymers limits their development. Additionally, studies on their applications remain scarce. Herein, a series of schizophrenic copolymers were synthesized by polymerization of a RAFT-made polymer precursor poly(acrylamide-co-N-acryloxysuccinimide-co-acrylic acid) (P(AAm-co-NAS-co-AAc)) with the mixture of N-isopropylmethacrylamide (NIPAm) and acrylamide (AAm) in varying molar ratios. In aqueous solution, the block P(AAm-co-NAS-co-AAc) and the block poly(NIPAm-co-AAm) exhibited upper and lower critical solution temperature (UCST and LCST) behavior, respectively. The schizophrenic copolymers featured either UCST-LCST, LCST-UCST, or only LCST thermo-responsive transition. A preliminary correlation of phase transition between the schizophrenic copolymers and their parent polymers was summarized. Furthermore, the co-assembly of the schizophrenic copolymers and proteins were conducted and the kinetics of protein loading and protein activity were investigated, which showed that the schizophrenic copolymers were efficient platforms for protein co-assembly with ultra-high protein loading while preserving the protein bioactivities. Additionally, all the materials were non-toxic towards NIH 3T3 and MCF-7 cells. This work offers the prospects of the schizophrenic polymers in soft colloidal and assembly systems, particularly in guiding the design of new materials and their use in biomedical applications.

Stimuli-responsive plasmonic core-satellite hybrid nanostructures with tunable nanogaps

Incorporating stimuli-responsive block copolymers to hierarchical metallic nanoparticles (MNPs) is of particular interest due to their tunable plasmonic properties responding to environmental stimuli. We herein report thermo-responsive plasmonic core-satellite hybrid nanostructures with tunable nanogaps as surface-enhanced Raman scattering (SERS) nanotags. Two different diblock copolymers with opposite charges, poly(acrylic acid-b-N-isopropylacrylamide) (p(AAc-b-NIPAM)) and poly(N,N-dimethylaminoethyl methacrylate-b-N-isopropylacrylamide) (p(DMAEMA-b-NIPAM)), were synthesized. The negatively charged p(AAc-b-NIPAM)s were bound to gold nanospheres (GNSs), while the positively charged p(DMAEMA-b-NIPAM)s were conjugated to gold nanorods (GNRs) via gold-sulfur bonds. When p(AAc-b-NIPAM)-GNSs and p(DMAEMA-b-NIPAM)-GNRs were electrostatically complexed, plasmonic hybrid nanostructures consisting of both GNS satellites and a GNR core were formed. Dynamic tuning of electromagnetic coupling of their nanogaps was achieved via a temperature-triggered conformational change of p(NIPAM) blocks. Furthermore, a sandwich-type immunoassay for the detection of immunoglobulin G was performed to demonstrate these core-satellites as potential SERS nanotags. Our results showed that these plasmonic core-satellites with stimuli-responsiveness are promising for SERS-based biosensing applications.

A hydrogel-based mechanical metamaterial for the interferometric profiling of extracellular vesicles in patient samples

The utility of mechanical metamaterials for biomedical applications has seldom been explored. Here we show that a metamaterial that is mechanically responsive to antibody-mediated biorecognition can serve as an optical interferometric mask to molecularly profile extracellular vesicles in ascites fluid from patients with cancer. The metamaterial consists of a hydrogel responsive to temperature and redox activity functionalized with antibodies to surface biomarkers on extracellular vesicles, and is patterned into micrometric squares on a gold-coated glass substrate. Through plasmonic heating, the metamaterial is maintained in a transition state between a relaxed form and a buckled state. Binding of extracellular vesicles from the patient samples to the antibodies on the hydrogel causes it to undergo crosslinking, induced by free radicals generated via the activity of horseradish peroxidase conjugated to the antibodies. Hydrogel crosslinking causes the metamaterial to undergo fast chiral re-organization, inducing amplified changes in its mechanical deformation and diffraction patterns, which are detectable by a smartphone camera. The mechanical metamaterial may find broad utility in the sensitive optical immunodetection of biomolecules.

Materials with Tunable Optical Properties for Wearable Epidermal Sensing in Health Monitoring

Advances in wearable epidermal sensors have revolutionized the way that physiological signals are captured and measured for health monitoring. One major challenge is to convert physiological signals to easily readable signals in a convenient way. One possibility for wearable epidermal sensors is based on visible readouts. There are a range of materials whose optical properties can be tuned by parameters such as temperature, pH, light, and electric fields. Herein, this review covers and highlights a set of materials with tunable optical properties and their integration into wearable epidermal sensors for health monitoring. Specifically, the recent progress, fabrication, and applications of these materials for wearable epidermal sensors are summarized and discussed. Finally, the challenges and perspectives for the next generation wearable devices are proposed.

Dendronized Gelatins Showing Both LCST and UCST-type Thermoresponsive Behavior

Modification of natural polymers with stimuli-responsive synthetic moieties witnesses convergences of superior properties from natural polymers and stimuli-responsiveness to generate new intelligent materials. This was usally performed through synthetic polymers...

RAFT-Polymerized N-Cyanomethylacrylamide-Based (Co)polymers Exhibiting Tunable UCST Behavior in Water

In this present work, the synthesis of a new family of upper critical solution temperature (UCST)-thermoresponsive polymers based on N-cyanomethylacrylamide (CMAm) is reported. It is demonstrated that the thermally initiated reversible addition fragmentation chain transfer (RAFT) polymerization of CMAm conducted in N,N-dimethylformamide (DMF) is well controlled. The homopolymer presents a sharp and reversible UCST-type phase transition in pure water with a very small hysteresis between cooling and heating cycles. It is demonstrated that the cloud point (T_CP ) of poly(N-cyanomethylacrylamide) (PCMAm) is strongly molar mass dependent and shifts toward lower temperatures in saline water. Moreover, the transition temperature can be tuned over a large temperature range by copolymerization of CMAm with acrylamide or acrylic acid. The latter copolymers are both thermoresponsive and pH responsive. Interestingly, by this strategy sharp and reversible UCST-type transitions close to physiological temperature can be reached, which makes the copolymers extremely interesting candidates for biomedical applications.

Constrained thermoresponsive polymers - new insights into fundamentals and applications

In the last decades, numerous stimuli-responsive polymers have been developed and investigated regarding their switching properties. In particular, thermoresponsive polymers, which form a miscibility gap with the ambient solvent with a lower or upper critical demixing point depending on the temperature, have been intensively studied in solution. For the application of such polymers in novel sensors, drug delivery systems or as multifunctional coatings, they typically have to be transferred into specific arrangements, such as micelles, polymer films or grafted nanoparticles. However, it turns out that the thermodynamic concept for the phase transition of free polymer chains fails, when thermoresponsive polymers are assembled into such sterically confined architectures. Whereas many published studies focus on synthetic aspects as well as individual applications of thermoresponsive polymers, the underlying structure-property relationships governing the thermoresponse of sterically constrained assemblies, are still poorly understood. Furthermore, the clear majority of publications deals with polymers that exhibit a lower critical solution temperature (LCST) behavior, with PNIPAAM as their main representative. In contrast, for polymer arrangements with an upper critical solution temperature (UCST), there is only limited knowledge about preparation, application and precise physical understanding of the phase transition. This review article provides an overview about the current knowledge of thermoresponsive polymers with limited mobility focusing on UCST behavior and the possibilities for influencing their thermoresponsive switching characteristics. It comprises star polymers, micelles as well as polymer chains grafted to flat substrates and particulate inorganic surfaces. The elaboration of the physicochemical interplay between the architecture of the polymer assembly and the resulting thermoresponsive switching behavior will be in the foreground of this consideration.

Aqueous Synthesis of Upper Critical Solution Temperature and Lower Critical Solution Temperature Copolymers through Combination of Hydrogen-Donors and Hydrogen-Acceptors

The synthesis of thermo-responsive polymers from non-responsive and water-soluble monomers has great practical advantages but significant challenges. Herein, the authors report a novel aqueous copolymerization strategy to prepare polymers with tunable upper critical solution temperature (UCST) or lower critical solution temperature (LCST) from non-responsive monomers. Acrylic acid (AAc), N-vinylpyrrolidone (NVP), and acrylamide (AAm) are copolymerized in water, yielding copolymers with UCST behavior. Interestingly, by simply replacing AAm with its methylated homologue, dimethyl acrylamide (DMA), the thermo-responsiveness of the copolymers is converted into LCST-type. The cloud points of the copolymers can be tuned rationally with their monomer ratios and the condition of the solvent. The UCST property of the poly(AAc-NVP-AAm) comes from the AAc-AAm and AAc-NVP hydrogen-bonds, while the LCST property of poly(AAc-NVP-DMA) originates from the hydrophobic aggregation of AAc-NVP complex and DMA, as indicated by temperature-dependent ¹ H NMR and dynamic light scattering.

Nanoengineering with RAFT polymers: from nanocomposite design to applications

Reversible addition–fragmentation chain-transfer (RAFT) polymerization is a powerful tool for the precise formation of macromolecular building blocks that can be used for the construction of well-defined nanocomposites.

Tuning drug dosing through matching optically active polymer composition and NIR stimulation parameters

Controlled release is at the forefront of modern bioscience as it aims to address challenges associated with the dosing of drugs within required levels for therapeutic effect. Many materials and approaches can be used to control the release from different reservoirs including nanoparticles, liposomes and hydrogels. Using thermoresponsive hydrogels, near infrared illumination of plasmonic nanoparticles can be used to control the hydrogel through localised surface plasmon resonance heating. This work extends beyond a material level and pursues detailed examination of the drug release characteristics of a variable acrylic acid poly(N-isopropylacrylamide) coated gold nanorod system using dexamethasone as a model drug. Release was examined under different irradiation power densities and exposure times. Bulk heating effects in all stimulation protocols did not exceed the lower critical solution temperature of the system, but a marked increase in release was seen following stimulation. This was likely due to more intense heating occurring around the nanorods. A release model was established to describe the amount of drug eluted relative to input energy, suggesting that shorter irradiation periods release the drug more efficiently. The data reported establishes plasmonically modulated thermosensitive hydrogels as a candidate material that can be tailored to specific clinical applications of stimulated release.

Optical tweezers-based characterisation of gold core-satellite plasmonic nano-assemblies incorporating thermo-responsive polymers

We report on the characterisation of the optical properties and dynamic behaviour of optically trapped single stimuli-responsive plasmonic nanoscale assemblies. Nano-assemblies consist of a core-satellite arrangement where the constituent nanoparticles are connected by the thermoresponsive polymer, poly(DEGA-co-OEGA). The optical tweezers allow the particles to be held isolated in solution and interrogated using dark-field spectroscopy. Additionally, controlling the optical trapping power provides localised heating for probing the thermal response of the nanostructures. Our results identify a number of distinct core-satellite configurations that can be stably trapped, which are verified using finite element modelling. Laser heating of the nanostructures through the trapping laser yields irreversible modification of the arrangement, as observed through the scattering spectrum. We consider which factors may be responsible for the observed behaviour in the context of the core-satellite geometry, polymer-solvent interaction, and the bonding of the nanoparticles.

Thermoresponsive properties of poly(acrylamide-co-acrylonitrile)-based diblock copolymers synthesized (by PISA) in water

UCST-type poly(acrylamide-co-acrylonitrile) diblock copolymers synthesized in water (by PISA) can not only undergo reversible temperature-induced chain dissociation, but also temperature-induced morphological transition.

“Smart” self-assembled structures: toward intelligent dual responsive drug delivery systems

In the current review, we summarized the polymer and peptide-based schizophrenic copolymers which could form micellar and vesicular (polymersome) systems providing novel structures with beneficial applications.

Switch It Inside-Out: "Schizophrenic" Behavior of All Thermoresponsive UCST-LCST Diblock Copolymers

This feature article reviews our recent advancements on the synthesis, phase behavior, and micellar structures of diblock copolymers consisting of oppositely thermoresponsive blocks in aqueous environments. These copolymers combine a nonionic block, which shows lower critical solution temperature (LCST) behavior, with a zwitterionic block that exhibits an upper critical solution temperature (UCST). The transition temperature of the latter class of polymers is strongly controlled by its molar mass and by the salt concentration, in contrast to the rather invariant transition of nonionic polymers with type II LCST behavior such as poly(N-isopropylacrylamide) or poly(N-isopropyl methacrylamide). This allows for implementing the sequence of the UCST and LCST transitions of the polymers at will by adjusting either molecular or, alternatively, physical parameters. Depending on the location of the transition temperatures of both blocks, different switching scenarios are realized from micelles to inverse micelles, namely via the molecularly dissolved state, the aggregated state, or directly. In addition to studies of (semi)dilute aqueous solutions, highly concentrated systems have also been explored, namely water-swollen thin films. Concerning applications, we discuss the possible use of the diblock copolymers as "smart" nanocarriers.

All-In-One "Schizophrenic" Self-Assembly of Orthogonally Tuned Thermoresponsive Diblock Copolymers

Smart, fully orthogonal switching was realized in a highly biocompatible diblock copolymer system with variable trigger-induced aqueous self-assembly. The polymers are composed of nonionic and zwitterionic blocks featuring lower and upper critical solution temperatures (LCSTs and UCSTs). In the system investigated, diblock copolymers from poly( N-isopropyl methacrylamide) (PNIPMAM) and a poly(sulfobetaine methacrylamide), systematic variation of the molar mass of the latter block allowed for shifting the UCST of the latter above the LCST of the PNIPMAM block in a salt-free condition. Thus, successive thermal switching results in "schizophrenic" micellization, in which the roles of the hydrophobic core block and the hydrophilic shell block are interchanged depending on the temperature. Furthermore, by virtue of the strong electrolyte-sensitivity of the zwitterionic polysulfobetaine block, we succeeded to shift its UCST below the LCST of the PNIPMAM block by adding small amounts of an electrolyte, thus inverting the pathway of switching. This superimposed orthogonal switching by electrolyte addition enabled us to control the switching scenarios between the two types of micelles (i) via an insoluble state, if the LCST-type cloud point is below the UCST-type cloud point, which is the case at low salt concentrations or (ii) via a molecularly dissolved state, if the LCST-type cloud point is above the UCST-type cloud point, which is the case at high salt concentrations. Systematic variation of the block lengths allowed for verifying the anticipated behavior and identifying the molecular architecture needed. The versatile and tunable self-assembly offers manifold opportunities, for example, for smart emulsifiers or for sophisticated carrier systems.