Characterizing Cross‐Linking Within Polymeric Biomaterials in the SEM by Secondary Electron Hyperspectral Imaging

Design of Chitin Cell Culture Matrices for 3D Tissue Engineering: The Importance of Chitin Types, Solvents, Cross-Linkers, and Fabrication Techniques

This review focuses on factors and the fabrication techniques affecting the microarchitecture of tissue engineering scaffolds from the second most abundant biopolymer, chitin. It emphasizes the unique potentiality of this polymer in tissue engineering (TE) applications and highlights the variables important to achieve tailored scaffold properties. First, we describe aspects of scaffolds' design, and the complex interplay between chitin types, solvent systems, additives, and fabrication techniques to incorporate porosity, with regard to best practices. In the following section, we provide examples of scaffolds' use, with a focus on in vitro cell studies. Finally, an analysis of their biodegradability is presented. Our review emphasizes the potentiality of chitin and the pressing need for further research to overcome existing challenges and fully harness its capabilities in tissue engineering.

Assessing the Quality of Oxygen Plasma Focused Ion Beam (O-PFIB) Etching on Polypropylene Surfaces Using Secondary Electron Hyperspectral Imaging

The development of Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM) systems has provided significant advances in the processing and characterization of polymers. A fundamental understanding of ion-sample interactions is still missing despite FIB-SEM being routinely applied in microstructural analyses of polymers. This study applies Secondary Electron Hyperspectral Imaging to reveal oxygen and xenon plasma FIB interactions on the surface of a polymer (in this instance, polypropylene). Secondary Electron Hyperspectral Imaging (SEHI) is a technique housed within the SEM chamber that exhibits multiscale surface sensitivity with a high spatial resolution and the ability to identify carbon bonding present using low beam energies without requiring an Ultra High Vacuum (UHV). SEHI is made possible through the use of through-the-lens detectors (TLDs) to provide a low-pass SE collection of low primary electron beam energies and currents. SE images acquired over the same region of interest from different energy ranges are plotted to produce an SE spectrum. The data provided in this study provide evidence of SEHI's ability to be a valuable tool in the characterization of polymer surfaces post-PFIB etching, allowing for insights into both tailoring polymer processing FIB parameters and SEHI's ability to be used to monitor serial FIB polymer surfaces in situ.

Characterization in respect to degradation of titanium-coated polypropylene surgical mesh explanted from humans

Titanium-coated polypropylene (Ti-PP) mesh was introduced in 2002 as a surgical mesh for the treatment of hernias and shortly after for pelvic floor surgery, with the aim of improving biocompatibility when compared to non-titanised/regular PP mesh implants. The application of a titanium coating could also be beneficial to address concerns regarding the exposure of PP in an in vivo environment. Many studies have shown that PP, although it is widely accepted as a stable polymer, is subject to oxidation and degradation, such degradation affects the mechanical behavior, that is, the stiffness and tensile strength of PP mesh. Despite the wide clinical use of Ti-PP surgical meshes, no study has yet investigated the residual material properties post clinical deployment and subsequent explantation. In this study, two explanted Ti-PP mesh samples each having different incorporation durations from two patients were examined. Material analysis conducted within this study includes the following techniques: attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy, low voltage - scanning electron microscopy (LV-SEM), backscattered electron (BSE) imaging, energy dispersive X-ray spectroscopy (EDS) and secondary election hyperspectral imaging (SEHI). The hypothesis of this study is that the Ti coating successfully shields the PP mesh from oxidative stress in vivo and thus protects it from degradation. The results of this analysis show for the first time evidence of bulk oxidation, surface degradation, and environmental stress cracking on explanted Ti-PP meshes.

Revealing Localised Mechanochemistry of Biomaterials Using In Situ Multiscale Chemical Analysis

The study of mechanical and chemical phenomena arising within a material that is being subjected to external stress is termed mechanochemistry (MC). Recent advances in MC have revealed the prospect not only to enable a greener route to chemical transformations but also to offer previously unobtainable opportunities in the production and screening of biomaterials. To date, the field of MC has been constrained by the inability of current characterisation techniques to provide essential localised multiscale chemically mapping information. A potential method to overcome this is secondary electron hyperspectral imaging (SEHI). SEHI is a multiscale material characterisation technique applied within a scanning electron microscope (SEM). Based on the collection of secondary electron (SE) emission spectra at low primary beam energies, SEHI is applicable to the chemical assessment of uncoated polymer surfaces. Here, we demonstrate that SEHI can provide in situ MC information using poly(glycerol sebacate)-methacrylate (PGS-M) as an example biomaterial of interest. This study brings the use of a bespoke in situ SEM holder together with the application of SEHI to provide, for the first time, enhanced biomaterial mechanochemical characterisation.

A novel characterisation approach to reveal the mechano-chemical effects of oxidation and dynamic distension on polypropylene surgical mesh

Polypropylene (PP) surgical mesh, used successfully for the surgical repair of abdominal hernias, is associated with serious clinical complications when used in the pelvic floor for repair of stress urinary incontinence or support of pelvic organ prolapse. While manufacturers claim that the material is inert and non-degradable, there is a growing body of evidence that asserts PP fibres are subject to oxidative damage and indeed explanted material from patients suffering with clinical complications has shown some evidence of fibre cracking and oxidation. It has been proposed that a pathological cellular response to the surgical mesh contributes to the medical complications; however, the mechanisms that trigger the specific host response against the material are not well understood. Specifically, this study was constructed to investigate the mechano-chemical effects of oxidation and dynamic distension on polypropylene surgical mesh. To do this we used a novel advanced spectroscopical characterisation technique, secondary electron hyperspectral imaging (SEHI), which is based on the collection of secondary electron emission spectra in a scanning electron microscope (SEM) to reveal mechanical-chemical reactions within PP meshes.

Monitoring Carbon in Electron and Ion Beam Deposition within FIB-SEM

It is well known that carbon present in scanning electron microscopes (SEM), Focused ion beam (FIB) systems and FIB-SEMs, causes imaging artefacts and influences the quality of TEM lamellae or structures fabricated in FIB-SEMs. The severity of such effects depends not only on the quantity of carbon present but also on its bonding state. Despite this, the presence of carbon and its bonding state is not regularly monitored in FIB-SEMs. Here we demonstrated that Secondary Electron Hyperspectral Imaging (SEHI) can be implemented in different FIB-SEMs (ThermoFisher Helios G4-CXe PFIB and Helios Nanolab G3 UC) and used to observe carbon built up/removal and bonding changes resulting from electron/ion beam exposure. As well as the ability to monitor, this study also showed the capability of Plasma FIB Xe exposure to remove carbon contamination from the surface of a Ti6246 alloy without the requirement of chemical surface treatments.

Poly(Glycerol Sebacate) in Biomedical Applications-A Review of the Recent Literature

Poly(glycerol sebacate) (PGS) continues to attract attention for biomedical applications owing to its favorable combination of properties. Conventionally polymerized by a two-step polycondensation of glycerol and sebacic acid, variations of synthesis parameters, reactant concentrations or by specific chemical modifications, PGS materials can be obtained exhibiting a wide range of physicochemical, mechanical, and morphological properties for a variety of applications. PGS has been extensively used in tissue engineering (TE) of cardiovascular, nerve, cartilage, bone and corneal tissues. Applications of PGS based materials in drug delivery systems and wound healing are also well documented. Research and development in the field of PGS continue to progress, involving mainly the synthesis of modified structures using copolymers, hybrid, and composite materials. Moreover, the production of self-healing and electroactive materials has been introduced recently. After almost 20 years of research on PGS, previous publications have outlined its synthesis, modification, properties, and biomedical applications, however, a review paper covering the most recent developments in the field is lacking. The present review thus covers comprehensively literature of the last five years on PGS-based biomaterials and devices focusing on advanced modifications of PGS for applications in medicine and highlighting notable advances of PGS based systems in TE and drug delivery.

Identifying and mapping chemical bonding within phenolic resin using secondary electron hyperspectral imaging

“Secondary electron hyperspectral imaging (SEHI) is an innovative SEM-based analysis tool allowing spatially-resolved chemical analysis beyond elemental composition”.