β-Sheet Nanocrystals Dictate Water Responsiveness of Bombyx Mori Silk

The role of water mobility on water-responsive actuation of silk

Biological water-responsive materials that deform with changes in relative humidity have recently demonstrated record-high actuation energy densities, showing promise as high-performance actuators for various engineering applications. However, there is a lack of theories capable of explaining or predicting the stress generated during water-responsiveness. Here, we show that the nanoscale confinement of water dominates the macroscopic dehydration-induced stress of the regenerated silk fibroin. We modified silk fibroin's secondary structure, which leads to various distributions of bulk-like mobile and tightly bound water populations. Interestingly, despite these structure variations, all silk samples start to exert force when the bound-to-mobile (B/M) ratio of confined water reaches the same level. This critical B/M water ratio suggests a common threshold above which the chemical potential of water instigates the actuation. Our findings serve as guidelines for predicting and engineering silk's WR behavior and suggest the potential of describing the WR behavior of biopolymers through confined water.

Structure-Dependent Water Responsiveness of Protein Block Copolymers

Biological water-responsive (WR) materials are abundant in nature, and they are used as mechanical actuators for seed dispersal by many plants such as wheat awns and pinecones. WR biomaterials are of interest for applications as high-energy actuators, which can be useful in soft robotics or for capturing energy from natural water evaporation. Recent work on WR silk proteins has shown that β-sheet nanocrystalline domains with high stiffness correlate with the high WR actuation energy density, but the fundamental mechanisms to drive water responsiveness in proteins remain poorly understood. Here, we design, synthesize, and study protein block copolymers consisting of two α-helical domains derived from cartilage oligomeric matrix protein coiled-coil (C) flanking an elastin-like peptide domain (E), namely, CEC. We use these protein materials to create WR actuators with energy densities that outperform mammalian muscle. To elucidate the effect of structure on WR actuation, CEC was compared to a variant, CECL44A, in which a point mutation disrupts the α-helical structure of the C domain. Surprisingly, CECL44A outperformed CEC, showing higher energy density and less susceptibility to degradation after repeated cycling. We show that CECL44A exhibits a higher degree of intermolecular interactions and is stiffer than CEC at high relative humidity (RH), allowing for less energy dissipation during water responsiveness. These results suggest that strong intermolecular interactions and the resulting, relatively steady protein structure are important for water responsiveness.

Harvesting Energy from Changes in Relative Humidity Using Nanoscale Water Capillary Bridges

We show that nanoscale water capillary bridges (WCB) formed between patchy surfaces can extract energy from the environment when subjected to changes in relative humidity (RH). Our results are based on molecular dynamics simulations combined with a modified version of the Laplace-Kelvin equation, which is validated using the nanoscale WCB. The calculated energy density harvested by the nanoscale WCB is relevant, ≈1700 kJ/m3, and is comparable to the energy densities harvested using available water-responsive materials that expand and contract due to changes in RH.

Aromatic Zipper Topology Dictates Water-Responsive Actuation in Phenylalanine-Based Crystals

Water-responsive (WR) materials that reversibly deform in response to relative humidity (RH) changes are gaining increasing interest for their potential in energy harvesting and soft robotics applications. Despite progress, there are significant gaps in the understanding of how supramolecular structure underpins the reconfiguration and performance of WR materials. Here, three crystals are compared based on the amino acid phenylalanine (F) that contain water channels and F packing domains that are either layered (F), continuously connected (phenylalanyl-phenylalanine, FF), or isolated (histidyl-tyrosyl-phenylalanine, HYF). Hydration-induced reconfiguration is analyzed through changes in hydrogen-bond interactions and aromatic zipper topology. F crystals show the greatest WR deformation (WR energy density of 19.8 MJ m^-3 ) followed by HYF (6.5 MJ m^-3 ), while FF exhibits no observable response. The difference in water-responsiveness strongly correlates to the deformability of aromatic regions, with FF crystals being too stiff to deform, whereas HYF is too soft to efficiently transfer water tension to external loads.  These findings reveal aromatic topology design rules for WR crystals and provide insight into general mechanisms of high-performance WR actuation. Moreover, the best-performing crystal, F emerges as an efficient WR material for applications at scale and low cost.

Enhanced water-responsive actuation of porous Bombyx mori silk

Bombyx mori silk with a nanoscale porous architecture significantly deforms in response to changes in relative humidity. Despite the increasing amount of water adsorption and water-responsive strain with increasing porosity of the silk, there is a range of porosities that result in silk's optimal water-responsive energy density at 3.1 MJ m^-3. Our findings show the possibility of controlling water-responsive materials' swelling pressure by controlling their nanoporosities.

Multifunctional bio-films based on silk nanofibres/peach gum polysaccharide for highly sensitive temperature, flame, and water detection

Given their environment friendliness, light weight, and availability, bio-films have attracted wide interest for various applications in sensor materials. However, obtaining sensors with good environmental stability, excellent flame retardancy, and high wet strength remains a challenge. Herein, we prepared sensitive water, temperature and flame-responsive multi-function bio-films (named as PSCG bio-films) by combining peach gum polysaccharide, silk nanofibres, citric acid, and graphene. The PSCG bio-films demonstrated good flexibility, rapid and consistent water absorption, and stable wet strength at different temperatures. The bio-films showed excellent water sensitivity and rapid fire responsiveness within a short time frame (2 s); moreover, the response and recovery times of the bio-films in the temperature range of 50-150 °C were 0.1 and 0.3 s, respectively. In addition, the bio-films can be applied to micro-sized fire early warning devices and personalized breath monitoring. Our work presents a facile and green approach (without toxic solvent) to fabricate multi-function sensors with applications in various industries.

Autonomous self-burying seed carriers for aerial seeding

Aerial seeding can quickly cover large and physically inaccessible areas¹ to improve soil quality and scavenge residual nitrogen in agriculture², and for postfire reforestation^3-5 and wildland restoration^6,7. However, it suffers from low germination rates, due to the direct exposure of unburied seeds to harsh sunlight, wind and granivorous birds, as well as undesirable air humidity and temperature^1,8,9. Here, inspired by Erodium seeds^10-14, we design and fabricate self-drilling seed carriers, turning wood veneer into highly stiff (about 4.9 GPa when dry, and about 1.3 GPa when wet) and hygromorphic bending or coiling actuators with an extremely large bending curvature (1,854 m^-1), 45 times larger than the values in the literature^15-18. Our three-tailed carrier has an 80% drilling success rate on flat land after two triggering cycles, due to the beneficial resting angle (25°-30°) of its tail anchoring, whereas the natural Erodium seed's success rate is 0%. Our carriers can carry payloads of various sizes and contents including biofertilizers and plant seeds as large as those of whitebark pine, which are about 11 mm in length and about 72 mg. We compare data from experiments and numerical simulation to elucidate the curvature transformation and actuation mechanisms to guide the design and optimization of the seed carriers. Our system will improve the effectiveness of aerial seeding to relieve agricultural and environmental stresses, and has potential applications in energy harvesting, soft robotics and sustainable buildings.

Development and challenges of smart actuators based on water-responsive materials

Water-responsive (WR) materials, due to their controllable mechanical response to humidity without energy actuation, have attracted lots of attention to the development of smart actuators. WR material-based smart actuators can transform natural humidity to a required mechanical motion and have been widely used in various fields, such as soft robots, micro-generators, smart building materials, and textiles. In this paper, the development of smart actuators based on different WR materials has been reviewed systematically. First, the properties of different biological WR materials and the corresponding actuators are summarized, including plant materials, animal materials, and microorganism materials. Additionally, various synthetic WR materials and their related applications in smart actuators have also been introduced in detail, including hydrophilic polymers, graphene oxide, carbon nanotubes, and other synthetic materials. Finally, the challenges of the WR actuator are analyzed from the three perspectives of actuator design, control methods, and compatibility, and the potential solutions are also discussed. This paper may be useful for the development of not only soft actuators that are based on WR materials, but also smart materials applied to renewable energy.

Structure of silk I (Bombyx mori silk fibroin before spinning) in the dry and hydrated states studied using 13C solid-state NMR spectroscopy

Nowadays, much attention has been paid to Bombyx mori silk fibroin (SF) by many researchers because of excellent physical properties and biocompatibility. These superior properties originate from the structure of SF and therefore, the structural analysis is a key to clarify the superiority. Here we concentrated on silk I structure (SF structure before spinning). We showed that silk I* (the structure of (GAGAGS)_n which is a main part of SF) is a repeated type II β-turn, neither α-helix nor random coil, from the conformation-dependent ¹³C NMR chemical shift data. This conclusion is different from that obtained using IR by many researchers. Next, the formation of silk I* structure was investigated at molecular level using ¹³C solid-state NMR spectroscopy. Three kinds of ¹³C INEPT, CP/MAS and DD/MAS NMR spectra were observed for SF, [3-¹³C] Ser- and [3-¹³C] Tyr-SF, the crystalline fraction obtained by chymotrypsin treatment of SF and their model peptide with silk I structures in the dry and hydrated states. Especially, the presence of the sequences containing Tyr, (((GX)_m1GY)_m2 where X = A or V) with random coil conformations adjacent to (GAGAGS)_n is an essence to get water-soluble SF and the formation of silk I* structure of (GAGAGS)_n.

High Energy and Power Density Peptidoglycan Muscles through Super-Viscous Nanoconfined Water

Water-responsive (WR) materials that reversibly deform in response to humidity changes show great potential for developing muscle-like actuators for miniature and biomimetic robotics. Here, it is presented that Bacillus (B.) subtilis' peptidoglycan (PG) exhibits WR actuation energy and power densities reaching 72.6 MJ m-3 and 9.1 MW m-3 , respectively, orders of magnitude higher than those of frequently used actuators, such as piezoelectric actuators and dielectric elastomers. PG can deform as much as 27.2% within 110 ms, and its actuation pressure reaches ≈354.6 MPa. Surprisingly, PG exhibits an energy conversion efficiency of ≈66.8%, which can be attributed to its super-viscous nanoconfined water that efficiently translates the movement of water molecules to PG's mechanical deformation. Using PG, WR composites that can be integrated into a range of engineering structures are developed, including a robotic gripper and linear actuators, which illustrate the possibilities of using PG as building blocks for high-efficiency WR actuators.

Protein Based Biomaterials for Therapeutic and Diagnostic Applications

Proteins are some of the most versatile and studied macromolecules with extensive biomedical applications. The natural and biological origin of proteins offer such materials several advantages over their synthetic counterparts, such as innate bioactivity, recognition by cells and reduced immunogenic potential. Furthermore, proteins can be easily functionalized by altering their primary amino acid sequence and can often be further self-assembled into higher order structures either spontaneously or under specific environmental conditions. This review will feature the recent advances in protein-based biomaterials in the delivery of therapeutic cargo such as small molecules, genetic material, proteins, and cells. First, we will discuss the ways in which secondary structural motifs, the building blocks of more complex proteins, have unique properties that enable them to be useful for therapeutic delivery. Next, supramolecular assemblies, such as fibers, nanoparticles, and hydrogels, made from these building blocks that are engineered to behave in a cohesive manner, are discussed. Finally, we will cover additional modifications to protein materials that impart environmental responsiveness to materials. This includes the emerging field of protein molecular robots, and relatedly, protein-based theranostic materials that combine therapeutic potential with modern imaging modalities, including near-infrared fluorescence spectroscopy (NIRF), single-photo emission computed tomography/computed tomography (SPECT/CT), positron emission tomography (PET), magnetic resonance imaging (MRI), and ultrasound/photoacoustic imaging (US/PAI).

Estimating Kinetic Rate Parameters for Enzymatic Degradation of Lyophilized Silk Fibroin Sponges

Sponge-like biomaterials formed from silk fibroin are promising as degradable materials in clinical applications due to their controllable breakdown into simple amino acids or small peptides in vivo. Silk fibroin, isolated from Bombyx mori silkworm cocoons, can be used to form sponge-like materials with a variety of tunable parameters including the elastic modulus, porosity and pore size, and level of nanocrystalline domains. These parameters can be independently tuned during formulation resulting in a wide parameter space and set of final materials. Determining the mechanism and rate constants for biomaterial degradation of these tunable silk materials would allow scientists to evaluate and predict the biomaterial performance for the large array of tissue engineering applications and patient ailments a priori. We first measured in vitro degradation rates of silk sponges using common protein-degrading enzymes such as Proteinase K and Protease XIV. The concentration of the enzyme in solution was varied (1, 0.1, 0.01 U/mL) along with one silk sponge formulation parameter: the level of crystallinity within the sponge. Additionally, two experimental degradation methods were evaluated, termed continuous and discrete degradation methods. Silk concentration, polymer chain length and scaffold pore size were held constant during experimentation and kinetic parameter estimation. Experimentally, we observed that the enzyme itself, enzyme concentration within the bulk solution, and the sponge fabrication water annealing time were the major experimental parameters dictating silk sponge degradation in our experimental design. We fit the experimental data to two models, a Michaelis-Menten kinetic model and a modified first order kinetic model. Weighted, non-linear least squares analysis was used to determine the parameters from the data sets and Monte-Carlo simulations were utilized to obtain estimates of the error. We found that modified first order reaction kinetics fit the time-dependent degradation of lyophilized silk sponges and we obtained first order-like rate constants. These results represent the first investigations into determining kinetic parameters to predict lyophilized silk sponge degradation rates and can be a tool for future mathematical representations of silk biomaterial degradation.

Structure of Silk I (Bombyx mori Silk Fibroin before Spinning) -Type II β-Turn, Not α-Helix

Recently, considerable attention has been paid to Bombyx mori silk fibroin by a range of scientists from polymer chemists to biomaterial researchers because it has excellent physical properties, such as strength, toughness, and biocompatibility. These appealing physical properties originate from the silk fibroin structure, and therefore, structural determinations of silk fibroin before (silk I) and after (silk II) spinning are a key to make wider applications of silk. There are discrepancies about the silk I structural model, i.e., one is type II β-turn structure determined using many solid-state and solution NMR spectroscopies together with selectively stable isotope-labeled model peptides, but another is α-helix or partially α-helix structure speculated using IR and Raman methods. In this review, firstly, the process that led to type II β-turn structure by the authors was introduced in detail. Then the problems in speculating silk I structure by IR and Raman methods were pointed out together with the problem in the assignment of the amide I band in the spectra. It has been emphasized that the conformational analyses of proteins and peptides from IR and Raman studies are not straightforward and should be very careful when the proteins contain β-turn structure using many experimental data by Vass et al. In conclusion, the author emphasized here that silk I structure should be type II β-turn, not α-helix.

Rapid Moisture-Responsive Silk Fibroin Actuators

We report the unique actuation characteristics of moisture-driven, fully reversible soft biopolymer films fabricated from Bombyx mori silk. The instantaneous actuation is driven by the water vapor induced stress gradient generated across the thickness of the film, and it possesses subsecond response and actuation times. The excellent durability and consistent performance of the film without any noticeable fatigue are established by subjecting it to more than a thousand continuous actuation cycles. The weight-lifting capability of the film is fascinating, where a few tens of micrograms of water generate a colossal force required to lift hundreds of milligrams of weight. Several other potential uses of silk fibroin based soft actuators, such as an intelligent textile layer with the crescent-shaped windows that open on perspiring skin and an autonomous crawler, are also demonstrated. Interestingly, even moisture emanating from the human palm triggers the ultrafast actuation process. These silk films are fabricated using a simple facile solution-casting technique, which can be scaled up with relative ease.