Mesoporous Organic/Inorganic Hybrid Materials with Frank‐Kasper Phases Templated by an Unusual Linear Symmetry Diblock Copolymer

High Thermal Resistance of Epoxy/Cyanate Ester Hybrids Incorporating an Inorganic Double-Decker-Shaped Polyhedral Silsesquioxane Nanomaterial

In this study, we prepared a difunctionalized cyanate ester double-decker silsesquioxane (DDSQ-OCN) cage with a char yield and thermal decomposition temperature (T_d) which were both much higher than those of a typical bisphenol A dicyanate ester (BADCy, without the DDSQ cage) after thermal polymerization. Here, the inorganic DDSQ nanomaterial improved the thermal behavior through a nano-reinforcement effect. Blending the inorganic DDSQ-OCN cage into the epoxy resin improved its thermal and mechanical stabilities after the ring-opening polymerization of the epoxy units during thermal polymerization. The enhancement in the physical properties arose from the copolymerization of the epoxy and OCN units to form the organic/inorganic covalently bonded network structure, as well as the hydrogen bonding of the OH groups of the epoxy with the SiOSi moieties of the DDSQ units. For example, the epoxy/DDSQ-OCN = 1/1 hybrid, prepared without Cu(II)-acac as a catalyst, exhibited a glass transition temperature, thermal decomposition temperature (T_d), and char yield (166 °C, 427 °C, and 51.0 wt%, respectively) that were significantly higher than those obtained when applying typical organic curing agents in the epoxy resin. The addition of Cu(II)-acac into the epoxy/BADCy and epoxy/DDSQ-OCN hybrids decreased the thermal stability (as characterized by the values of T_d and the char yields) because the crosslinking density and post-hardening also decreased during thermal polymerization; nevertheless, it accelerated the thermal polymerization to a lower curing peak temperature, which is potentially useful for real applications as epoxy molding compounds.

Double-Decker-Shaped Polyhedral Silsesquioxanes Reinforced Epoxy/Bismaleimide Hybrids Featuring High Thermal Stability

In this study, we synthesized bismaleimide into a functionalized double-decker silsesquioxane (DDSQ) cage. This was achieved by hydrosilylation of DDSQ with nadic anhydride (ND), reacting it with excess p-phenylenediamine to obtain DDSQ-ND-NH₂, and treating with maleic anhydride (MA), which finally created a DDSQ-BMI cage structure. We observed that the thermal decomposition temperature (T_d) and char yield were both increased upon increasing the thermal polymerization temperature, and that these two values were both significantly higher than pure BMI without the DDSQ cage structure since the inorganic DDSQ nanoparticle could strongly enhance the thermal stability based on the nano-reinforcement effect. Based on FTIR, TGA, and DMA analyses, it was found that blending epoxy resin with the DDSQ-BMI cage to form epoxy/DDSQ-BMI hybrids could also enhance the thermal and mechanical properties of epoxy resin due to the organic/inorganic network formation created by the ring-opening polymerization of the epoxy group and the addition polymerization of the BMI group due to the combination of the inorganic DDSQ cage structure and hydrogen bonding effect. The epoxy/DDSQ-BMI = 1/1 hybrid system displayed high T_g value (188 °C), T_d value (397 °C), and char yield (40.4 wt%), which was much higher than that of the typical DGEBA type epoxy resin with various organic curing agents.

A π-Conjugated Polyimide-Based High-Performance Aqueous Potassium-Ion Asymmetric Supercapacitor

Aqueous asymmetric supercapacitor has captured widespread attention as a sustainable high-power energy resource. Organic electrode materials are appealing owing to their sustainability and high redox reactivity, but suffer from structural instability and low power density. Here the π-conjugated polyimide-based organic electrodes with different lengths of alkyl chains are explored to achieve high rate capability and long lifespan in an aqueous K⁺ -ion electrolyte. The fabricated asymmetric supercapacitor exhibits high capacities of 107 mAh g^-1 at 2 A g^-1 and 67 mAh g^-1 at 90 A g^-1 . A specific capacity of 65 mAh g^-1 which is over 70% of the initial performance is obtained after 65,000 cycles. Molecular engineering of long alkyl chains in polyimide could reduce the degree of π-conjugation and spatially block the π-conjugated imide bond with limited redox activity but improved stability against chemical degradation. Further electrochemical quartz crystal microbalance (EQCM) and ex situ FTIR and XPS characterizations reveal the pseudocapacitance behavior originated from the π-conjugated polyimide-based redox reaction with potassium ions and hydrated potassium ions. We showcase a promising polyimide-based polymer with extended π-conjugated system for high-performance asymmetric supercapacitor. This article is protected by copyright. All rights reserved.

Constructing 3D Interconnected Si/SiOx /C Nanorings from Polyhedral Oligomeric Silsesquioxane

Polyhedral oligomeric silsesquioxane (POSS) is a family of organic/inorganic hybrid materials with specific molecular symmetry, and shows great potential in the structural design of nanomaterials. Here, a "bottom-up" strategy is designed to fabricate 3D interconnected Si/SiO_x /C nanorings (NRs) via AlCl₃ -assisted aluminothermic reduction using dodecaphenyl cage silsesquioxane (T₁₂ -Ph) as the building block. In this process, AlCl₃ acts as both a liquid medium for reduction, and significantly as the catalyst to the cross-linking of phenyl groups in T₁₂ -Ph. The obtained Si/SiO_x /C NRs exhibits uniform diameter of ≈165 nm and well distribution of C and Si elements. The unique ring-like structure of Si/SiO_x /C NRs makes it have great application potential in the field of lithium ion batteries. Notably, Si/SiO_x /C NRs exhibits superior high-rate capacity and good cycle stability when used as anode for LIBs. More excitingly, Si/SiO_x /C NRs can deliver a high reversible capacity of 517.9 mA h g^-1 at ultra-low temperature of -70 °C, and the capacity retention as high as ≈50% of that at 25 °C. This work not only broadens structural design of carbon-based nanomaterials but also provides more possibilities for the application of POSS.

Organic/Inorganic Self-Assembled Hybrid Nano-Architectures for Cancer Therapy Applications

Since the conceptualization of nanomedicine, numerous nanostructure-mediated drug formulations have progressed into clinical trials for treating cancer. However, recent clinical trial results indicate such kind of drug formulations has a limited improvement on the antitumor efficacy. This is due to the biological barriers associated with those formulations, for example, circulation stability, extravasation efficiency in tumor, tumor penetration ability, and developed multi-drug resistance. When employing for nanomedicine formulations, pristine organic-based and inorganic-based nanostructures have their own limitations. Accordingly, organic/inorganic (O/I) hybrids have been developed to integrate the merits of both, and to minimize their intrinsic drawbacks. In this context, the recent development in O/I hybrids resulting from a self-assembly strategy will be introduced. Through such a strategy, organic and inorganic building blocks can be self-assembled via either chemical covalent bonds or physical interactions. Based on the self-assemble procedure, the hybridization of four organic building blocks including liposomes, micelles, dendrimers, and polymeric nanocapsules with five functional inorganic nanoparticles comprising gold nanostructures, magnetic nanoparticles, carbon-based materials, quantum dots, and silica nanoparticles will be highlighted. The recent progress of these O/I hybrids in advanced modalities for combating cancer, such as, therapeutic agent delivery, photothermal therapy, photodynamic therapy, and immunotherapy will be systematically reviewed.

Ordered Mesoporous Silica Pyrolyzed from Single-Source Self-Assembled Organic-Inorganic Giant Surfactants

We report the preparation of hexagonal mesoporous silica from single-source giant surfactants constructed via dihydroxyl-functionlized polyhedral oligomeric silsesquioxane (DPOSS) heads and a polystyrene (PS) tail. After thermal annealing, the obtained well-ordered hexagonal hybrid was pyrolyzed to afford well-ordered mesoporous silica. A high porosity (e.g., 581 m²/g) and a uniform and narrow pore size distribution (e.g., 3.3 nm) were achieved. Mesoporous silica in diverse shapes and morphologies were achieved by processing the precursor. When the PS tail length was increased, the pore size expanded accordingly. Moreover, such pyrolyzed, ordered mesoporous silica can help to increase both efficiency and stability of nanocatalysts.