Temperature-Responsive Surface Coatings Based on Poly(methylsilsesquioxane)-hybrid Polymers

Multicore-shell PNIPAm-co-PEGMa microcapsules for cell encapsulation

The overall goal of this study was to fabricate multifunctional core-shell microcapsules with biological cells encapsulated within the polymer shell. Biocompatible temperature responsive microcapsules comprised of silicone oil droplets (multicores) and yeast cells embedded in a polymer matrix (shell) were prepared using a novel microarray approach. The cross-linked polymer shell and silicone multicores were formed in situ via photopolymerization of either poly(N-isopropylacryamide)(PNIPAm) or PNIPAm, copolymerized with poly(ethylene glycol monomethyl ether monomethacrylate) (PEGMa) within the droplets of an oil-in-water-in-oil double emulsion. An optimized recipe yielded a multicore-shell morphology, which was characterized by optical and laser scanning confocal microscopy (LSCM) and theoretically confirmed by spreading coefficient calculations. Spreading coefficients were calculated from interfacial tension and contact angle measurements as well as from the determination of the Hamaker constants and the pair potential energies. The effects of the presence of PEGMa, its molecular weight (M(n) 300 and 1100 g/mol), and concentration (10, 20, and 30 wt %) were also investigated, and they were found not to significantly alter the morphology of the microcapsules. They were found, however, to significantly improve the viability of the yeast cells, which were encapsulated within PNIPAm-based microcapsules by direct incorporation into the monomer solutions, prior to polymerization. Under LSCM, the fluorescence staining for live and dead cells showed a 30% viability of yeast cells entrapped within the PNIPAm matrix after 45 min of photopolymerization, but an improvement to 60% viability in the presence of PEGMa. The thermoresponsive behavior of the microcapsules allows the silicone oil cores to be irreversibly ejected, and so the role of the silicone oil is 2-fold. It facilitates multifunctionality in the microcapsule by first being used as a template to obtain the desired core-shell morphology, and second it can act as an encapsulant for oil-soluble drugs. It was shown that the encapsulated oil droplets were expelled above the volume phase transition temperature of the polymer, while the collapsed microcapsule remained intact. When these microcapsules were reswollen with an aqueous solution, it was observed that the hollow compartments refilled. In principle, these hollow-core microcapsules could then be filled with water-soluble drugs that could be delivered in vivo in response to temperature.

Reactive surface coatings based on polysilsesquioxanes: defined adjustment of surface wettability

We have investigated a generally applicable protocol for a substrate-independent reactive polymer coating that offers interesting possibilities for further molecular tailoring via simple wet chemical derivatization reactions. Poly(methylsilsesquioxane)-poly(pentafluorophenyl acrylate) hybrid polymers have been synthesized by RAFT polymerization, and stable reactive surface coatings have been prepared by spin-coating on the following substrates: Si, glass, gold, PMMA, PDMS, and steel. These coatings have been used for a defined adjustment of surface wettability by surface-analogous reaction with various amines (e.g., glutamic acid to obtain hydrophilic surfaces (Theta(a) = 18 degrees) or perfluorinated amines to obtain hydrophobic surfaces (Theta(a) = 138 degrees)). Besides the successful covalent attachment of small molecules and polymers, amino-functionalized nanoparticles could also be deposited on the surface, resulting in nanostructured coatings, thereby expanding the accessible contact angle of hydrophobic surfaces further to Theta(a) = 152 degrees. The surface-analogous conversion of the reactive coating with isopropyl amine produced in situ temperature-responsive coatings. Using the presented simple, generally applicable protocol for substrate-independent reactive polymer coatings, the contact angle of water could be switched reversibly by almost 60 degrees.

Living Radical Polymerization by the RAFT Process - A Second Update

This paper provides a second update to the review of reversible deactivation radical polymerization achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition–fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379–410). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669–692). This review cites over 500 papers that appeared during the period mid-2006 to mid-2009 covering various aspects of RAFT polymerization ranging from reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses and a diverse range of applications. Significant developments have occurred, particularly in the areas of novel RAFT agents, techniques for end-group removal and transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.