Ag Nanocomposite Particles: Preparation, Characterization and Application

Rhodium nanoparticles inside well-defined unimolecular amphiphilic polymeric nanoreactors: synthesis and biphasic hydrogenation catalysis

Rhodium nanoparticles (Rh NPs) embedded in different amphiphilic core-crosslinked micelle (CCM) latexes (RhNP@CCM) have been synthesized by [RhCl(COD)(TPP@CCM)] reduction with H₂ (TPP@CCM = core-anchored triphenylphosphine). The reduction rate depends on temperature, on the presence of base (NEt₃) and on the P/Rh ratio. For CCMs with outer shells made of neutral P(MAA-co-PEOMA) copolymer chains (RhNP@CCM-N), the core-generated Rh NPs tend to migrate toward the hydrophilic shell and to agglomerate depending on the P/Rh ratio and core TPP density, whereas the MAA protonation state has a negligible effect. Conversely, CCMs with outer shells made of polycationic P(4VPMe⁺I^-) chains (RhNP@CCM-C) maintain core-confined and well dispersed Rh NPs. All RhNP@CCMs were used as catalytic nanoreactors under aqueous biphasic conditions for acetophenone, styrene and 1-octene hydrogenation. Styrene was efficiently hydrogenated by all systems with high selectivity for vinyl reduction. For acetophenone, competition between benzene ring and carbonyl reduction was observed as well as a limited access to the catalytic sites when using CCM-C. Neat 1-octene was also converted, but the activity increased when the substrate was diluted in 1-nonanol, which is a better core-swelling solvent. Whereas the molecular Rh^I center was more active than the Rh⁰ NPs in 1-octene hydrogenation, the opposite trend was observed for styrene hydrogenation. Although Rh NP migration and agglomeration occurred for RhNP@CCM-N, even at high P/Rh, the NPs remained core-confined for RhNP@CCM-C, but only when toluene rather than diethyl ether was used for product extraction before recycling.

Recent advances in stimuli-responsive core-shell microgel particles: synthesis, characterisation, and applications

Inspired by the path followed by Matthias Ballauff over the past 20 years, the development of thermosensitive core-shell microgel structures is reviewed. Different chemical structures, from hard nanoparticle cores to double stimuli-responsive microgels have been devised and successfully implemented by many different groups. Some of the rich variety of these systems is presented, as well as some recent progress in structural analysis of such microstructures by small-angle scattering of neutrons or X-rays, including modelling approaches. In the last part, again following early work by the group of Matthias Ballauff, applications with particular emphasis on incorporation of catalytic nanoparticles inside core-shell structures—stabilising the nanoparticles and granting external control over activity—will be discussed, as well as core-shell microgels at interfaces.

A Key Major Guideline for Engineering Bioactive Multicomponent Nanofunctionalization for Biomedicine and Other Applications: Fundamental Models Confirmed by Both Direct and Indirect Evidence

This paper deals with the engineering multicomponent nanofunctionalization process considering fundamental physicochemical features of nanostructures such as surface energy, chemical bonds, and electrostatic interactions. It is pursued by modeling the surface nanopatterning and evaluating the proposed technique and the models. To this end, the effects of surface modifications of nanoclay on surface interactions, orientations, and final features of TiO₂/Mt nanocolloidal textiles functionalization have been investigated. Various properties of cross-linkable polysiloxanes (XPs) treated samples as well as untreated samples with XPs have been compared to one another. The complete series of samples have been examined in terms of bioactivity and some physical properties, given to provide indirect evidence on the surface nanopatterning. The results disclosed a key role of the selected factors on the final features of treated surfaces. The effects have been thoroughly explained and modeled according to the fundamental physicochemical features. The developed models and associated hypotheses interestingly demonstrated a full agreement with all measured properties and were appreciably confirmed by FESEM evidence (direct evidence). Accordingly, a guideline has been developed to facilitate engineering and optimizing the pre-, main, and post-multicomponent nanofunctionalization procedures in terms of fundamental features of nanostructures and substrates for biomedical applications and other approaches.

Preparation and characterization of Ag–Pd bimetallic nano-catalysts in thermosensitive microgel nano-reactor

Thermosensitive microgels consisting of a solid core of polystyrene and a shell of cross-linked poly(N-isopropylacrylamide) (PNIPA) were synthesized as nano-reactors, in which Ag–Pd bimetallic nanoparticles were prepared through simultaneous in situ reduction reaction. The spatial distribution of metallic nanoparticles in the microgels was analyzed by small angle X-ray scattering (SAXS) and the results indicated that metal nanoparticles were mainly located in the inner layer of microgels. The catalytic activity of Ag–Pd bimetallic nanoparticles was investigated using the reduction of p-nitrophenol to p-aminophenol by NaBH₄ as model reaction. The data demonstrated that Ag–Pd bimetallic nanoparticles showed enhanced catalytic activity compared to each monometallic nanoparticle alone and their catalytic activity was controllable by temperature due to the volume transition of PNIPA microgels.

Thermosensitive microgels with PS core and cross-linked PNIPA shell were synthesized as nano-reactor to prepare Ag–Pd bimetallic nanoparticles.

Efficiently amplified ultrasonic degradation of spherical polyelectrolyte brushes by a magnetic field

This work describes a facile and green method about the ultrasonic degradation of polymer chains amplified by magnetic field.

Nanosilver as a new generation of silver catalysts in organic transformations for efficient synthesis of fine chemicals

Silver nanoparticles catalysis has been of great interest in organic synthesis and has expanded rapidly in the past ten years because of nanosilver catalysts' unique reactivity and selectivity, stability, as well as recyclability in catalytic reactions.

Non NIPAM Based Smart Microgels: Systematic Variation of the Volume Phase Transition Temperature by Copolymerization

Thermoresponsive copolymer microgels based on N-n-propylacrylamide (NNPAM) and N-isopropylmethacrylamide (NIPMAM) with varying compositions were synthesized via precipitation polymerization. Photon correlation spectroscopy (PCS) and turbidity measurements were used to investigate their volume phase transition. A linear correlation between the nominal composition and the volume phase transition temperature (VPTT) was observed. Furthermore, the hydrodynamic radii of the particles exhibit a linear dependency on the nominal composition. The presented system is suitable for the synthesis of thermoresponsive microgels with a well defined VPTT or size and gives access to tune these two crucial parameters in a systematic and controlled way by simply choosing the right composition of the monomer feed. Additionally, the first derivatives of the swelling curves obtained from turbidity measurements were analyzed in detail, allowing a quantitative comparison of the phase transition of different microgels.

Spherical polyelectrolyte brushes as a nanoreactor for synthesis of ultrafine magnetic nanoparticles

Ultrafine magnetic nanoparticles (MNP, 1.4-5.8 nm) were generated within a nanoreactor of spherical polyelectrolyte brushes (SPB). SPB consist of a solid polystyrene (PS) core and densely grafted poly(acrylic acid) (PAA) chains. Due to strong chemical coordination between carboxyl groups in PAA and MNP surfaces, the obtained magnetic spherical polyelectrolyte brushes (MSPB) kept excellent stability and maintained pH sensitivity. The magnetic properties of MSPB were confirmed by a vibrating sample magnetometer (VSM). The size and the size dispersion of MNP can be modulated by varying adding sequences (conventional coprecipitation or reverse coprecipitation), or nanoreactor structure (with or without crosslinking). MNP content in MSPB could be adjusted by multicycle reactions. This new strategy makes it possible to synthesize ultrafine inorganic nanoparticles with tunable size in SPB.

A temperature-responsive nanoreactor

An originally designed temperature-responsive nanoreactor is reported. The nanoreactor is made of Ag nanoparticles and a functional polymer composite of poly(acrylamide) (PAAm) and poly(2-acrylamide-2-methylpropanesulfonic acid) (PAMPS). At a relatively low temperature (e.g., 20 °C), this nanoreactor displayed weak reactivity because of the interpolymer complexation between PAAm and PAMPS, which largely restricted the access of reactants to the encapsulated Ag nanoparticles. On the contrary, at a relatively high temperatures (e.g., 40 °C), the nanoreactor demonstrated significant catalytic activity resulting from the dissociation of the interpolymer complexation between PAAm and PAMPS, which allowed reactants to get access to the encapsulated Ag nanoparticles. By taking account of previously reported PNIPAm-based nanoreactors, which show inverse temperature response, i.e., reactivity decreases whilst temperature increases, this temperature-responsive nanoreactor would greatly facilitate and enrich the increasing studies on smart nanomaterials, generating numerous applications in a wide range of areas, such as catalysis and sensing.