Preparation and In Vivo Imaging of Lucifer Yellow Tagged Hydrogels

A Synthetic Toolbox for the In Situ Formation of Functionalized Homo- and Heteropolysaccharide-Based Hydrogel Libraries

A synthetic toolbox for the introduction of aldehydo and hydrazido groups into the polysaccharides hyaluronic acid, alginate, dextran, pullulan, glycogen, and carboxymethyl cellulose and their use for hydrogel formation is reported. Upon mixing differently functionalized polysaccharides derived from the same natural precursor, hydrazone cross-linking takes place, which results in formation of a hydrogel composed of one type of polysaccharide backbone. Likewise, hydrogels based on two different polysaccharide strands can be formed after mixing the corresponding aldehydo- and hydrazido-modified polysaccharides. A second line of these studies paves the way to introduce a biomedically relevant ligand, namely, the adhesion factor cyclic RGD pentapeptide, by using an orthogonal click reaction. This set of modified polysaccharides served to create a library of hydrogels that differ in the combination of polysaccharide strands and the degree of cross-linking. The different hydrogels were evaluated with respect to their rheological properties, their ability to absorb water, and their cytotoxicity towards human fibroblast cell cultures. None of the hydrogels studied were cytotoxic, and, hence, they are in principal biocompatible for applications in tissue engineering.

Hyaluronic Acid Molecular Weight Determines Lung Clearance and Biodistribution after Instillation

Hyaluronic acid (HA) has emerged as a versatile polymer for drug delivery. Multiple commercial products utilize HA, it can be obtained in a variety of molecular weights, and it offers chemical handles for cross-linkers, drugs, or imaging agents. Previous studies have investigated multiple administration routes, but the absorption, biodistribution, and pharmacokinetics of HA after delivery to the lung is relatively unknown. Here, pharmacokinetic parameters were investigated by delivering different molecular weights of HA (between 7 and 741 kDa) to the lungs of mice. HA was labeled with either a near-infrared dye or with iodine-125 conjugated to HA using a tyrosine linker. In initial studies, dye-labeled HA was instilled into the lungs and fluorescent images of organs were collected at 1, 8, and 24 h post administration. Data suggested longer lung persistence of higher molecular weight HA, but signal diminished for all molecular weights at 8 h. To better quantitate pharmacokinetic parameters, different molecular weights of iodine-125 labeled HA were instilled and organ radioactivity was determined after 1, 2, 4, 6, and 8 h. The data showed that, after instillation, the lungs contained the highest levels of HA, as expected, followed by the gastrointestinal tract. Smaller molecular weights of HA showed more rapid systemic distribution, while 67 and 215 kDa HA showed longer persistence in the lungs. Lung exposure appeared to be optimum in this size range due to the rapid absorption of <67 kDa HA and the poor lung penetration and mucociliary clearance of viscous solutions of HA > 215 kDa. The versatility of HA molecular weight and conjugation chemistries may, therefore, provide new opportunities to extend pulmonary drug exposure and potentially facilitate access to lymph nodes draining the pulmonary bed.

Non-invasive in vitro and in vivo monitoring of degradation of fluorescently labeled hyaluronan hydrogels for tissue engineering applications

Tracking of degradation of hydrogels-based biomaterials in vivo is very important for rational design of tissue engineering scaffolds that act as delivery carriers for bioactive factors. During the process of tissue development, an ideal scaffold should remodel at a rate matching with scaffold degradation. To reduce amount of animals sacrificed, non-invasive in vivo imaging of biomaterials is required which relies on using of biocompatible and in situ gel forming compounds carrying suitable imaging agents. In this study we developed a method of in situ fabrication of fluorescently labeled and injectable hyaluronan (HA) hydrogel based on one pot sequential use of Michael addition and thiol-disulfide exchange reactions for the macromolecules labeling and cross-linking respectively. Hydrogels with different content of HA were prepared and their enzymatic degradation was followed in vitro and in vivo using fluorescence multispectral imaging. First, we confirmed that the absorbance of the matrix-linked near-IR fluorescent IRDye® 800CW agent released due to the matrix enzymatic degradation in vitro matched the amount of the degraded hydrogel measured by classical gravimetric method. Secondly, the rate of degradation was inversely proportional to the hydrogel concentration and this structure-degradation relationship was similar for both in vitro and in vivo studies. It implies that the degradation of this disulfide cross-linked hyaluronan hydrogel in vivo can be predicted basing on the results of its in vitro degradation studies. The compliance of in vitro and in vivo methods is also promising for the future development of predictive in vitro tissue engineering models.

STATEMENT OF SIGNIFICANCE

The need for engineered hydrogel scaffolds that deliver bioactive factors to endogenous progenitor cells in vivo via gradual matrix resorption and thus facilitate tissue regeneration is increasing with the aging population. Importantly, scaffold should degrade at a modest rate that will not be too fast to support tissue growth nor too slow to provide space for tissue development. The present work is devoted to longitudinal tracking of a hydrogel material in vivo from the time of its implantation to the time of complete resorption without sacrificing animals. The method demonstrates correlation of resorption rates in vivo and in vitro for hydrogels with varied structural parameters. It opens the possibility to develop predictive in vitro models for tissue engineered scaffolds and reduce animal studies.

Functional biomedical hydrogels for in vivo imaging

In vivo imaging of biomedical hydrogels enables real-time and non-invasive visualization of the status of structure and function of hydrogels.

Rule-based classification models of molecular autofluorescence

Fluorescence-based detection has been commonly used in high-throughput screening (HTS) assays. Autofluorescent compounds, which can emit light in the absence of artificial fluorescent markers, often interfere with the detection of fluorophores and result in false positive signals in these assays. This interference presents a major issue in fluorescence-based screening techniques. In an effort to reduce the time and cost that will be spent on prescreening of autofluorescent compounds, in silico autofluorescence prediction models were developed for selected fluorescence-based assays in this study. Five prediction models were developed based on the respective fluorophores used in these HTS assays, which absorb and emit light at specific wavelengths (excitation/emission): Alexa Fluor 350 (A350) (340 nm/450 nm), 7-amino-4-trifluoromethyl-coumarin (AFC) (405 nm/520 nm), Alexa Fluor 488 (A488) (480 nm/540 nm), Rhodamine (547 nm/598 nm), and Texas Red (547 nm/618 nm). The C5.0 rule-based classification algorithm and PubChem 2D chemical structure fingerprints were used to develop prediction models. To optimize the accuracies of these prediction models despite the highly imbalanced ratio of fluorescent versus nonfluorescent compounds presented in the collected data sets, oversampling and undersampling strategies were applied. The average final accuracy achieved for the training set was 97%, and that for the testing set was 92%. In addition, five external data sets were used to further validate the models. Ultimately, 14 representative structural features (or rules) were determined to efficiently predict autofluorescence in data sets containing both fluorescent and nonfluorescent compounds. Several cases were illustrated in this study to demonstrate the applicability of these rules.

Protoporphyrin incorporated alginate hydrogel: preparation, characterization and fluorescence imaging in vivo

A protoporphyrin incorporated alginate hydrogel exhibits the fluorescence ability to locate a drug and carrier with multispectral fluorescence imaging in vivo.

Zinc phthalocyanine labelled polyethylene glycol: preparation, characterization, interaction with bovine serum albumin and near infrared fluorescence imaging in vivo

Zinc phthalocyanine labelled polyethylene glycol was prepared to track and monitor the in vivo fate of polyethylene glycol. The chemical structures were characterized by nuclear magnetic resonance and infrared spectroscopy. Their light stability and fluorescence quantum yield were evaluated by UV-Visible and fluorescence spectroscopy methods. The interaction of zinc phthalocyanine labelled polyethylene glycol with bovine serum albumin was evaluated by fluorescence titration and isothermal titration calorimetry methods. Optical imaging in vivo, organ aggregation as well as distribution of fluorescence experiments for tracking polyethylene glycol were performed with zinc phthalocyanine labelled polyethylene glycol as fluorescent agent. Results show that zinc phthalocyanine labelled polyethylene glycol has good optical stability and high emission ability in the near infrared region. Imaging results demonstrate that zinc phthalocyanine labelled polyethylene glycol can track and monitor the in vivo process by near infrared fluorescence imaging, which implies its potential in biomaterials evaluation in vivo by a real-time noninvasive method.