High-resolution separation of oligonucleotides and DNA sequencing reaction products by capillary electrophoresis with linear polyacrylamide and laser-induced fluorescence detection

Evaluation of liposomal delivery of antisense oligonucleotide by capillary electrophoresis with laser-induced fluorescence detection

Two widely used commercial cationic liposome formulations, Lipofectamine and Escort, were evaluated for drug delivery efficacy with capillary electrophoresis coupled with laser-induced fluorescence detection using a fluorescein conjugated 2'-O-methyl-phosphorothioate (Me-PS) antisense oligonucleotide and the HeLa cell line. Binding constants were estimated by monitoring changes in the electrophoretic mobility of the oligonucleotide with the liposome solution in the running buffer. From these changes in mobility, the binding constants for Lipofectamine and Escort liposomes with Me-PS oligomer were estimated to be 1139 and 590 M(-1), respectively. Additionally, intracellular concentrations and gene expression were quantified for the liposome formulations.

Copolymer solutions as separation media for DNA capillary electrophoresis

A review on copolymers used as DNA separation media in capillary electrophoresis is presented. Copolymers can combine the desirable properties of different monomers, yielding many attractive features, such as high sieving ability, low viscosity, self-assembly behavior and dynamic coating ability. Copolymers with different molecular architecture, including block copolymers, random copolymers, and graft copolymers, have been developed and tested as DNA separation media with unique and tailored properties that cannot be achieved easily by using only homopolymers.

Quantitation of intracellular concentration of a delivered morpholino oligomer by capillary electrophoresis-laser- induced fluorescence: correlation with upregulation of luciferase gene expression

Antisense oligonucleotides have shown great promise over the past several years as viable drugs to combat various forms of cancer and viral diseases. However, quantitative detection to monitor cellular association is difficult using conventional methods such as radiolabeling of the oligonucleotide or fluorescence confocal microscopy. In this paper quantitation of intracellular concentration of the morpholino oligonucleotide is investigated using capillary electrophoresis coupled with laser-induced fluorescence detection (CE-LIF). HeLa cells, which produce luciferase as the antisense oligomer enters the cell, were scrape-loaded with varying concentrations of the morpholino antisense. The intracellular antisense concentration measured by CE-LIF was found to correlate with those obtained with the cellular functional assay based on upregulation of luciferase. Intracellular concentrations of the antisense were found to be in the range of 6 to 29 nmol/g total cell protein, depending on the amounts that were scrape-loaded. To our best knowledge, this is the first reported quantitative correlation between delivered antisense concentration in a cell extract and the subsequent antisense upregulation of gene expression.

DNA sequencing by capillary electrophoresis using copolymers of acrylamide and N,N-dimethylacrylamide

Copolymers of acrylamide (AM) and N,N-dimethylacrylamide (DMA) with AM to DMA molar ratios of 3:1, 2:1 and 1:1 and molecular weights of about 2.2 MDa were synthesized. The polymers were tested as separation media in DNA sequencing analysis by capillary electrophoresis (CE). The dynamic coating ability of polydimethylacrylamide (PDMA) and the hydrophilicity of polyacrylamide (PAM) have been successfully combined in these random copolymers. A separation efficiency of over 10 million theoretical plates per meter has been reached by using the bare capillaries without the additional polymer coating step. Under optimized separation conditions for longer read length DNA sequencing, the separation ability of the copolymers decreased with decreasing AM to DMA molar ratio from 3:1, 2:1 and 1:1. In comparison with PAM, the copolymer with a 3:1 AM:DMA ratio showed a higher separation efficiency. By using a 2.5% w/v copolymer with 3:1 AM:DMA ratio, one base resolution of 0.55 up to 699 bases and 0.30 up to 963 bases have been achieved in about 80 min at ambient temperatures.

Fast DNA sequencing up to 1,000 bases by capillary electrophoresis using poly(N,N-dimethylacrylamide) as a separation medium

Poly(N,N-dimethylacrylamide) (PDMA) with a molecular mass of 5.2 x 10(6) g/mol has been synthesized and used in DNA sequencing analysis by capillary electrophoresis (CE). A systematic investigation is presented on the effects of different separation conditions, such as injection amount, capillary inner diameter, polymer concentration, effective separation length, electric field and temperature, on the resolution. DNA sequencing up to 800 bases with a resolution (R) limit of 0.5 (and 1,000 bases with a resolution limit of 0.3) and a migration time of 96 min was achieved by using 2.5% w/v polymer, 150 V/cm separation electric field, and 60 cm effective separation length at room temperature on a DNA sample prepared with FAM-labeled--21M13 forward primer on pGEM3Zf(+) and terminated with ddCTP. Ultrafast and fast DNA sequencing up to 420 and 590 bases (R > or = 0.5) were also achieved by using 3% w/v polymer and 40 cm effective separation length with a separation electric field of 525 and 300 V/cm, and a migration time of 12.5 and 31.5 min, respectively. PDMA has low viscosity, long shelf life and dynamic coating ability to the glass surface. The unique properties of PDMA make it a very good candidate as a separation medium for large-scale DNA sequencing by capillary array electrophoresis (CAE).

Capillary electrophoresis of DNA fragments in 9 to 20% uncrosslinked polyacrylamide gels: unique separating capacity hypothetically related to maintenance of random-coil DNA conformation independently of gel concentration

DNA fragments (0.1 to 2 kb) were separated by capillary electrophoresis (CE) in 9 to 20% uncrosslinked polyacrylamide gels with a resolving power ranging from 3 to o.1 million theoretical plates/meter across that DNA size range. The unique feature of electrophoresis in 18 to 20% uncrosslinked polyacrylamide is that it provides a method capable of resolving charge isomeric species of DNA fragments (0.4 to 2 kb), confirming a previous report by Heiger et al. [Heiger DN, Cohen AS, Karger BL. J Chromatogr 516 (1990) 33-48]. A similarly unique resolving capacity of uncrosslinked polyacrylamide gels for DNA previously reported is that for heteroduplex DNA [Pulyaeva H, Zakharov SF, Garner MM, Chrambach A. Electrophoresis 15 (1994) 1095-1100] matched by crosslinked gels only in the presence of denaturants [Peeters AV, Kotze MJ. PCR Methods Appl 4 (1994) 188-190; Ganguly A, Rock MJ, Prockop DJ. Proc Natl Acad Sci USA 90 (1993) 10 325-10 329]. A clue as to the cause of that unique resolving capacity of crosslinked polyacrylamide is provided by the finding in the present study of a single, gel concentration independent KR [retardation coefficient, d(log mobility)/d(gel concentration)] for the DNA fragments, which contrasts with the decrease of KR with gel concentration observed for crosslinked polyacrylamide across a wide concentration range [Orban L, Chrambach A. Electrophoresis 12 (1991) 241-246; Tietz D, Chrambach A. Electrophoresis 14 (1993) 185-190]. Since the decrease of KR with gel concentration correlates with a decrease in equivalent molecular radius [Tietz D, Chrambach A. Electrophoresis 14 (1993) 185-190], it has been interpreted as being due to the transition from a random-coiled to a stretched DNA conformation upon passage through gels of increasing concentration. Since in uncrosslinked gels the decrease of KR does not occur, it is correspondingly assumed that the random-coil conformation of DNA is maintained in those gels in the investigated concentration range up to 20%. The maintenance of random-coil conformation [Tietz D, Chrambach A. Electrophoresis 14 (1993) 185-190]. The effect of denaturants in allowing for resolution of heteroduplex DNA in crosslinked gels [Peeters AV, Kotze MJ. PCR Methods Appl 4 (1994) 188-190; Ganguly A, Rock MJ, Prockop DJ, Proc Natl Acad Sci USA 90 (1993) 10 325-10 329] supports that hypothesis of the enhanced resolving power of electrophoresis in gels that maintain random-coiled DNA within the gel concentration range used.

DNA sequencing by capillary electrophoresis

Capillary electrophoresis has been under development for DNA sequencing since 1990. This development has traveled down two parallel tracks. The first track studied the details of DNA separation by gel electrophoresis. Early work stressed rapid separations at high electric fields, which reached the extreme of a 3.5 min sequencing run at 1200 V/cm. While fast separations are useful in clinical resequencing applications for mutation detection, long read-length is important in genomic sequencing. Unfortunately, sequence read-length degrades as electric field and sequencing speed increases; this tradeoff between read-length and sequencing speed appears to be a fundamental result of the physics of DNA separations in a polymer. The longest sequence sequencing read-lengths have been obtained at modest electric fields, high temperature, and with low concentration noncrosslinked polymers. In parallel with our understanding of DNA separations, the second track of DNA sequencing development considered the design of large-scale capillary instruments, wherein hundreds of DNA samples can be sequenced in parallel. Real-world application of these very high throughput capillary electrophoresis systems will require significant investment in sample preparation technology.

Pseudo-coulometric loading in capillary electrophoresis DNA sequencing

While injection volumes in capillary electrophoresis are typically in the nanoliter range, it is difficult to physically prepare and manipulate samples much smaller than a microliter. As a result, only a small fraction of the analyte contained with the sample volume is transferred to the capillary. This problem is particularly acute in DNA sequencing applications, where on-column stacking is difficult and where the sequencing sample is relatively expensive to prepare. We report a method that transfers 75% of the DNA contained within a 3 microliters sample onto a capillary for DNA sequencing. This method relies on the use of very low ionic strength formamide to resuspend the DNA after an ethanol precipitation. The use of low ionic strength formamide achieves two tasks. First, it produces a very high resistance sample, which increases the voltage drop across the sample and decreases the field across the capillary. This electric field manipulation ensures that DNA fragments do not migrate down the capillary during the loading process, allowing long injection periods without excessive band-broadening. Second, the low ionic strength of the formamide increases the transference number of the DNA; more of the current passing through the injection tip of the capillary is carried by DNA fragments. In the limit of complete elimination of impurity ions from the loading solvent, current passing through the sample is carried only by DNA fragments and loading becomes a coulometric process.