Hydrogen bonds and local symmetry in the crystal structure of gibbsite

Insights into the Structure of Sucralfate by Advanced Solid- and Liquid-State NMR

Sucralfate, which is a sucrose octasulfate aluminum complex, is an active pharmaceutical ingredient (API) falling in the category of cytoprotective agents which are very effective for gastric and duodenal ulcers. On interaction with stomach acid, it ionizes into aluminum and sucrose octasulfate ions to form a protective layer over the ulcerated region inhibiting further attack from acid. The mechanism of action of sucralfate in the context of its structure is not well understood. Considering that at least two forms of this API are available in the market, there are no reports on the various forms of sucralfate and differences in their pharmacological action. We characterized the two forms of sucralfate using multinuclear, multidimensional solid-state NMR, and the results show significant structural differences between them arising from variation in the aluminum environment and the level of hydration. The impact of structural differences on pharmacological action was examined by studying acid-induced Al release by 27Al liquid-state NMR. The sucralfate, European pharmaceutical standard, Form I, undergoes faster disruption in acid compared to Form II. The difference is explained on the basis of structural differences in the two forms which gives significant insights into the action of sucralfate in relation to its structure.

Phase Chemistry for Hydration Sensitive (De)intercalation of Lithium Aluminum Layered Double Hydroxide Chlorides

Lithium aluminum layered double hydroxide chlorides (LADH-Cl) have been widely used for lithium extraction from brine. Elevation of the performances of LADH-Cl sorbents urgently requires knowledge of the composition-structure-property relationship of LADH-Cl in lithium extraction applications, but these are still unclear. Herein, combining the phase equilibrium experiments, advanced solid characterization methods, and theoretical calculations, we constructed a cyclic work diagram of LADH-Cl for lithium capture from aqueous solution, where the reversible (de)hydration and (de)intercalation induced phase evolution of LADH-Cl dominates the apparent lithium "adsorption-desorption" behavior. It is found that the real active ingredient in LADH-Cl type lithium sorbents is a dihydrated LADH-Cl with an Al:Li molar ratio varying from 2 to 3. This reversible process indicates an ultimate reversible lithium (de)intercalation capacity of ∼10 mg of Li per g of LADH-Cl. Excessive lithium deintercalation results in the phase structure collapse of dihydrated LADH-Cl to form gibbsite. When interacting with a concentrated LiCl aqueous solution, gibbsite is easily converted into lithium saturated intercalated LADH-Cl phases. By further hydration with a diluted LiCl aqueous solution, this phase again converts to the active dihydrated LADH-Cl. In the whole cyclic progress, lithium ions thermodynamically favor staying in the Al-OH octahedral cavities, but the (de)intercalation of lithium has kinetic factors deriving from the variation of the Al-OH hydroxyl orientation. The present results provide fundamental knowledge for the rational design and application of LADH-Cl type lithium sorbents.

Atomistic mechanisms of water vapor-induced surface passivation

The microscopic mechanisms underpinning the spontaneous surface passivation of metals from ubiquitous water have remained largely elusive. Here, using in situ environmental electron microscopy to atomically monitor the reaction dynamics between aluminum surfaces and water vapor, we provide direct experimental evidence that the surface passivation results in a bilayer oxide film consisting of a crystalline-like Al(OH)3 top layer and an inner layer of amorphous Al2O3. The Al(OH)3 layer maintains a constant thickness of ~5.0 Å, while the inner Al2O3 layer grows at the Al2O3/Al interface to a limiting thickness. On the basis of experimental data and atomistic modeling, we show the tunability of the dissociation pathways of H2O molecules with the Al, Al2O3, and Al(OH)3 surface terminations. The fundamental insights may have practical significance for the design of materials and reactions for two seemingly disparate but fundamentally related disciplines of surface passivation and catalytic H2 production from water.

Cluster defects in gibbsite nanoplates grown at acidic to neutral pH

Gibbsite [α-Al(OH)₃] is the solubility limiting phase for aluminum across a wide pH range, and it is a common mineral phase with many industrial applications. The growth mechanism of this layered-structure material, however, remains incompletely understood. Synthesis of gibbsite at low to circumneutral pH yields nanoplates with substantial interlayer disorder. Here we examine defects in this material in detail, and the effects of recrystallization in highly alkaline sodium hydroxide solution at 80 °C. We employed a multimodal approach, including scanning electron microscopy, magic-angle spinning nuclear magnetic resonance (MAS-NMR), Raman and infrared spectroscopies, X-ray diffraction (XRD), and X-ray total scattering pair distribution function (XPDF) analysis to characterize the ageing of the nanoplates over several days. XRD and XPDF indicate that gibbsite nanoplates precipitated at circumneutral pH contain dense, truncated sheets imparting a local difference in interlayer distance. These interlayer defects appear well described by flat Al₁₃ aluminum hydroxide nanoclusters nearly isostructural with gibbsite sheets present under synthesis conditions and trapped as interlayer inclusions during growth. Ageing at elevated temperature in alkaline solutions gradually improves crystallinity, showing a gradual increase in H-bonding between interlayer OH groups. Between 7 to 8 vol% of the initial gibbsite nanoparticles exhibit this defect, with the majority of differences disappearing after 2-4 hours of recrystallization in alkaline solution. The results not only identify the source of disorder in gibbsite formed under acidic/neutral conditions but also point to a possible cluster-mediated growth mechanism evident through inclusion of relict oligomers with gibbsite-like topology trapped in the interlayer spaces.

Exploiting in-situ solid-state NMR spectroscopy to probe the early stages of hydration of calcium aluminate cement

We report a high-field in-situ solid-state NMR study of the hydration of CaAl₂O₄ (the most important hydraulic phase in calcium aluminate cement), based on time-resolved measurements of solid-state ²⁷Al NMR spectra during the early stages of the reaction. A variant of the CLASSIC NMR methodology, involving alternate recording of direct-excitation and MQMAS ²⁷Al NMR spectra, was used to monitor the ²⁷Al species present in both the solid and liquid phases as a function of time. Our results provide quantitative information on the changes in the relative amounts of ²⁷Al sites with tetrahedral coordination (the anhydrous reactant phase) and octahedral coordination (the hydrated product phases) as a function of time, and reveal significantly different kinetic and mechanistic behaviour of the hydration reaction at the different temperatures (20 °C and 60 °C) studied.

Highly Efficient Lithium Recovery from Pre-Synthesized Chlorine-Ion-Intercalated LiAl-Layered Double Hydroxides via a Mild Solution Chemistry Process

Lithium extraction from salt lake brine is critical for satisfying the increasing demand of a variety of lithium products. We report lithium recovery from pre-synthesized LiAl-layered double hydroxides (LDHs) via a mild solution reaction. Lithium ions were released from solid LiAl-LDHs to obtain a lithium-bearing solution. The LiAl-LDHs phase was gradually transformed into a predominantly Al(OH)₃ phase with lithium recovery to the aqueous solution. The lithium recovery percentage and the concentration of the lithium-bearing solution were dependent on the crystallinity of LiAl-LDHs, the initial concentration of the LiAl-LDHs-1 slurry, the reaction temperature, and the reaction time. Under optimized conditions, the lithium recovery reached 86.2% and the Li⁺ concentration in the filtrate is 141.6 mg/L. Interestingly, no aluminum ions were detected in the filtrate after solid–liquid separation with high crystallinity LiAl-LDHs, which indicated the complete separation of lithium and aluminum in the liquid and solid phases, respectively. The ²⁷Al NMR spectra of the solid products indicate that lithium recovery from the lattice vacancies of LiAl-LDHs affects the AlO₆ coordination in an octahedral configuration of the ordered Al(OH)₃ phase. The XPS O 1s spectra show that the O_ad peak intensity increased and the O_L peak intensity decreased with the increasing lithium recovery, which indicated that the Al-OH bond was gradually formed and the metal–oxygen–metal bond was broken.

Alumina: discriminative analysis using 3D correlation of solid-state NMR parameters

Synthetic transition aluminas (χ, κ, θ, γ, δ, η, ρ) exhibit unique adsorptive and catalytic properties leading to numerous practical applications. Generated by thermal transformation of aluminium (oxy)hydroxides, structural differences between them arise from the variability of aluminium coordination numbers and degree of dehydroxylation. Unequivocal identification of these phases using X-ray diffraction has proven to be very difficult. Quadrupolar interactions of 27Al nuclei, highly sensitive to each site symmetry, render advanced 27Al solid-state NMR a unique spectroscopic tool to fingerprint and identify the different phases. In this paper, 27Al NMR spectroscopic data on alumina reported in literature are collected in a comprehensive library. Based on this dataset, a new 3D correlative method of NMR parameters is presented, enabling fingerprinting and identification of such phases. Providing a gold standard from crystalline samples, this approach demonstrates that any sort of crystalline, ill crystallized or amorphous, mixed periodic or aperiodically ordered transition alumina can now be assessed beyond the current limitations of characterisation. Adopting the presented approach as a standard characterisation of alumina samples will readily reveal NMR parameter-structure-property relations suitable to develop new or improved applications of alumina. Methodological guidance is provided to assist consistent implementation of this characterisation throughout the fields involved.

Importance of interlayer H bonding structure to the stability of layered minerals

Layered (oxy) hydroxide minerals often possess out-of-plane hydrogen atoms that form hydrogen bonding networks which stabilize the layered structure. However, less is known about how the ordering of these bonds affects the structural stability and solubility of these minerals. Here, we report a new strategy that uses the focused electron beam to probe the effect of differences in hydrogen bonding networks on mineral solubility. In this regard, the dissolution behavior of boehmite (γ-AlOOH) and gibbsite (γ-Al(OH)3) were compared and contrasted in real time via liquid cell electron microscopy. Under identical such conditions, 2D-nanosheets of boehmite (γ-AlOOH) exfoliated from the bulk and then rapidly dissolved, whereas gibbsite was stable. Further, substitution of only 1% Fe(III) for Al(III) in the structure of boehmite inhibited delamination and dissolution. Factors such as pH, radiolytic species, and knock on damage were systematically studied and eliminated as proximal causes for boehmite dissolution. Instead, the creation of electron/hole pairs was considered to be the mechanism that drove dissolution. The widely disparate behaviors of boehmite, gibbsite, and Fe-doped boehmite are discussed in the context of differences in the OH bond strengths, hydrogen bonding networks, and the presence or absence of electron/hole recombination centers.

Direct observation of ionic structure at solid-liquid interfaces: a deep look into the Stern Layer

The distribution of ions and charge at solid-water interfaces plays an essential role in a wide range of processes in biology, geology and technology. While theoretical models of the solid-electrolyte interface date back to the early 20^th century, a detailed picture of the structure of the electric double layer has remained elusive, largely because of experimental techniques have not allowed direct observation of the behaviour of ions, i.e. with subnanometer resolution. We have made use of recent advances in high-resolution Atomic Force Microscopy to reveal, with atomic level precision, the ordered adsorption of the mono- and divalent ions that are common in natural environments to heterogeneous gibbsite/silica surfaces in contact with aqueous electrolytes. Complemented by density functional theory, our experiments produce a detailed picture of the formation of surface phases by templated adsorption of cations, anions and water, stabilized by hydrogen bonding.

Probing Local Structure of Layered Double Hydroxides with (1)H Solid-State NMR Spectroscopy on Deuterated Samples

By using a simple and efficient deuteration process, (2)H has been successfully introduced into layered double hydroxides (LDHs). Due to significantly less (1)H-(1)H homonuclear dipolar coupling, high-resolution (1)H solid-state NMR spectra can now be obtained conveniently at medium to low spinning speed to extract the information of cation ordering in LDHs. Furthermore, we show that double-resonance experiments can be applied easily to investigate internuclear proximities and test possible cation-ordered superstructure models. This approach can be readily extended to LDHs with different compositions to explore the local structure and the key interactions between the cations in the layer and interlayer anions.