Vitrification of pronuclear-stage mouse embryos on solid surface (SSV) versus in cryotube: Comparison of the effect of equilibration time and different sugars in the vitrification solution

Droplet Generation, Vitrification, and Warming for Cell Cryopreservation: A Review

Cryopreservation is currently a key step in translational medicine that could provide new ideas for clinical applications in reproductive medicine, regenerative medicine, and cell therapy. With the advantages of a low concentration of cryoprotectant, fast cooling rate, and easy operation, droplet-based printing for vitrification has received wide attention in the field of cryopreservation. This review summarizes the droplet generation, vitrification, and warming method. Droplet generation techniques such as inkjet printing, microvalve printing, and acoustic printing have been applied in the field of cryopreservation. Droplet vitrification includes direct contact with liquid nitrogen vitrification and droplet solid surface vitrification. The limitations of droplet vitrification (liquid nitrogen contamination, droplet evaporation, gas film inhibition of heat transfer, frosting) and solutions are discussed. Furthermore, a comparison of the external physical field warming method with the conventional water bath method revealed that better applications can be achieved in automated rapid warming of microdroplets. The combination of droplet vitrification technology and external physical field warming technology is expected to enable high-throughput and automated cryopreservation, which has a promising future in biomedicine and regenerative medicine.

Rapid freezing versus Cryotop vitrification of mouse two-cell embryos

Objective

To compare our in-house method of embryo freezing with Cryotop vitrification in terms of immediate survival, subsequent cleavage and blastocyst formation, and cell numbers in blastocysts.

Methods

Two-cell mouse embryos were randomly allocated into three groups: a non-frozen control group (group 1, n=300), a group that underwent Cryotop vitrification (group 2, n=300), and a group that underwent our in-house freezing method (group 3, n=300).

Results

There were no significant differences between groups 2 and 3 in the immediate survival rate (96.3% vs. 98.6%, respectively; p=0.085), the further cleavage rate (91.7% vs. 95.0%, respectively; p=0.099), or the blastocyst formation rate (80.7% vs. 78.6%, respectively; p=0.437). The cell numbers in the blastocysts from groups 1, 2, and 3 were comparable (88.99±10.44, 88.29±14.79, and 86.42±15.23, respectively; p=0.228). However, the percentage of good-quality blastocysts in the Cryotop vitrification group was significantly higher than in the group in which our in-house method was performed, but was lower than in the control group (58.0%, 37.0%, and 82.7%, respectively; p<0.001).

Conclusion

At present, our method is inferior to the commercial Cryotop vitrification system. However, with further improvements, it has the potential to be useful in routine practice, as it is easier to perform than the current vitrification system.

Effect of different penetrating and non-penetrating cryoprotectants and media temperature on the cryosurvival of vitrified in vitro produced porcine blastocysts

The aim of this study was to determine the most efficient vitrification protocol for the cryopreservation of day 7 in vitro produced (IVP) porcine blastocysts. The post-warm survival rate of blastocysts vitrified in control (17% dimethyl sulfoxide + 17% ethylene glycol [EG] + 0.4 mol/L sucrose) and commercial media did not differ, nor did the post-warm survival rate of blastocysts vitrified in medium containing 1,2-propandiol in place of EG. However, vitrifying embryos in EG alone decreased the cryosurvival rate (55.6% and 33.6%, respectively, p < .05). Furthermore, the post-warm survival rates of blastocysts vitrified with either trehalose or sucrose as the non-penetrating cryoprotectant did not differ. There was also no significant difference in post-warm survival of blastocysts vitrified in control (38°C) media and room temperature (22°C) media with extended equilibration times, although when blastocysts were vitrified using control media at room temperature, the post-warm survival rate increased (56.8%, 57.3%, 72.5%, respectively, p < .05). The findings show that most cryoprotectant combinations examined proved equally effective at supporting the post-warm survival of IVP porcine blastocysts. The improved post-warm survival rate of blastocysts vitrified using media held at room temperature suggests that the cryoprotectant toxicity exerted in 22°C media was reduced.

High throughput cryopreservation of cells by rapid freezing of sub-μl drops using inkjet printing--cryoprinting

We have successfully used inkjet printing to cryopreserve 3T3 mouse fibroblast cells and human neuroprogenitor cells (NPCs) derived from human embryonic stem cells (hESCs). Sessile drops of volume 114 nl were formed by printing cell suspensions containing dimethyl sulphoxide (DMSO) as a cryoprotection agent (CPA) at rates in the region 100 Hz-20 kHz, from individual droplets of 380 pl. After printing and a freeze/thaw cycle (with a minimum 24 hours hold period at liquid N2 temperature), 3T3 cells showed an average viability of >90% with CPA concentration <0.8 M at all drop deposition rates. This is a significantly lower CPA concentration than normally used with conventional cryopreservation methods. Cell viability shows a small variation with the polymer substrates used, with the best results obtained using a polyimide substrate. The viability of 3T3 cells after 2 months storage at liquid nitrogen temperature was slightly reduced compared to the cells held for 24 hours but there was no significant further deterioration after 4 or 6 months storage. The viability of NPCs after an identical freeze/thaw cycle were only 55% but this is comparable with conventional cryopreservation methods that use much higher CPA concentrations. A parallel series of experiments printing cells onto substrates held at 195 K or directly into liquid N2 showed considerable variation in cell survival rate with drop deposition rate. Cell suspensions required higher levels of CPA than when printing followed by freezing. At low deposition rates a combination of DMSO and polyethylene glycol (PEG) was needed to allow cell viability after freezing. These results show that inkjet printing provides a practical high throughput method for the cryopreservation of cells with lower CPA concentrations than are required for current low volume cryopreservation methods.

Emerging technologies in medical applications of minimum volume vitrification

Cell/tissue biopreservation has broad public health and socio-economic impact affecting millions of lives. Cryopreservation technologies provide an efficient way to preserve cells and tissues targeting the clinic for applications including reproductive medicine and organ transplantation. Among these technologies, vitrification has displayed significant improvement in post-thaw cell viability and function by eliminating harmful effects of ice crystal formation compared to the traditional slow freezing methods. However, high cryoprotectant agent concentrations are required, which induces toxicity and osmotic stress to cells and tissues. It has been shown that vitrification using small sample volumes (i.e., <1 µl) significantly increases cooling rates and hence reduces the required cryoprotectant agent levels. Recently, emerging nano- and micro-scale technologies have shown potential to manipulate picoliter to nanoliter sample sizes. Therefore, the synergistic integration of nanoscale technologies with cryogenics has the potential to improve biopreservation methods.

Nanoliter droplet vitrification for oocyte cryopreservation

AIM

Oocyte cryopreservation remains largely experimental, with live birth rates of only 2-4% per thawed oocyte. In this study, we present a nanoliter droplet technology for oocyte vitrification.

MATERIALS & METHODS

An ejector-based droplet vitrification system was designed to continuously cryopreserve oocytes in nanoliter droplets. Oocyte survival rates, morphologies and parthenogenetic development after each vitrification step were assessed in comparison with fresh oocytes.

RESULTS

Oocytes were retrieved after cryoprotectant agent loading/unloading, and nanoliter droplet encapsulation showed comparable survival rates to fresh oocytes after 24 h in culture. Also, oocytes recovered after vitrification/thawing showed similar morphologies to those of fresh oocytes. Additionally, the rate of oocyte parthenogenetic activation after nanoliter droplet encapsulation was comparable with that observed for fresh oocytes. This nanoliter droplet technology enables the vitrification of oocytes at higher cooling and warming rates using lower cryoprotectant agent levels (i.e., 1.4 M ethylene glycol, 1.1 M dimethyl sulfoxide and 1 M sucrose), thus making it a potential technology to improve oocyte cryopreservation outcomes.

Cryopreservation of mammalian embryos: Advancement of putting life on hold

Rodent transgenesis and human-assisted reproductive programs involve multistep handling of preimplantation embryos. The efficacy of production and quality of results from conventionally scheduled programs are limited by temporal constraints other than the quality and quantities of embryos per se. The emergence of vitrification, a water ice-free cryopreservation technique, as a reliable way to arrest further growth of preimplantation embryos, provides an option to eliminate the time constraint. In this article, current and potential applications of cryopreservation to facilitate laboratory animal experiments, colony management, and human-assisted reproductive programs are reviewed. Carrier devices developed for vitrification in the last two decades are compared with an emphasis on their physical properties that infer cooling rate of samples and sterility assurance. Biological impacts of improved cryopreservation on preimplantation embryos are also discussed.

Solid-surface vitrification is an appropriate and convenient method for cryopreservation of isolated rat follicles

BACKGROUND

Cryopreservation of isolated follicles may be a potential option to restore fertility in young women with cancer, because it can prevent the risks of cancer transmission. Several freezing protocols are available, including slow-rate freezing, open-pulled straws vitrification (OPS) and solid-surface vitrification (SSV, a new freezing technique). The purpose of our study was to investigate the effects of these freezing procedures on viability, ultrastructure and developmental capacity of isolated rat follicles.

METHODS

Isolated follicles from female Sprague-Dawley rats were randomly assigned to SSV, OPS and slow-rate freezing groups for cryopreservation. Follicle viability assessment and ultrastructural examination were performed after thawing. In order to study the developmental capacity of thawed follicles, we performed in vitro culture with a three-dimensional (3D) system by alginate hydrogels.

RESULTS

Our results showed that the totally viable rate of follicles vitrified by SSV (64.76%) was slightly higher than that of the OPS group (62.38%) and significantly higher than that of the slow-rate freezing group (52.65%; P < 0.05). The ultrastructural examination revealed that morphological alterations were relatively low in the SSV group compared to the OPS and slow-rate freezing groups. After in vitro culture within a 3D system using alginate hydrogels, we found the highest increase (28.90 +/- 2.21 microm) in follicle diameter in follicles from the SSV group. The estradiol level in the SSV group was significantly higher than those in the OPS and slow-rate freezing groups at the end of a 72-hr culture period (P < 0.05).

CONCLUSIONS

Our results suggest that the SSV method is an appropriate and convenient method for cryopreservation of isolated rat follicles compared with the conventional slow-rate freezing method and the OPS method.

Effect of vitrification on mitochondrial distribution and membrane potential in mouse two pronuclear (2-PN) embryos

The present study was designed to investigate the effect of vitrification on mitochondrial distribution, membrane potential (Deltapsi) and microtubule distribution in mouse 2-PN embryos, as well as to document the relationship between mitochondrial distribution and developmental ability of those embryos. Mitochondrial distribution was examined by fluorescence microscopy technology. Results indicated that: (1) The rate of mitochondrial ring formation around pronuclei in vitrified 2-PN embryos was significantly lower than in fresh ones (67.3 +/- 3.0% vs. 84.9 +/- 3.1%) (P < 0.05). (2) Blastocyst development rate of vitrified 2-PN embryos without mitochondrial rings (61.7 +/- 4.5%) was significantly lower than that of vitrified embryos with mitochondrial rings (82.1 +/- 2.8%). (3) Following staining by 5,5',6,6'-tetrachloro-1,1',3,3'-tetraethyl-imidacarbo-cyanine iodide (JC-1), most red-colored mitochondria (high Deltapsi) were distributed peripherally around pronuclei and along cell membranes of fresh 2-PN embryos. Conversely, red-colored mitochondria were greatly diminished in vitrified embryos, with green mitochondria (low Deltapsi) evenly distributed throughout the cytoplasm. The proportion of fresh 2-PN embryos with obvious aggregation of high Deltapsi mitochondria (84.2 +/- 2.2%) was significantly higher than that of vitrified embryos (26.7 +/- 3.0%) (P < 0.05). (4) The proportion of fresh embryos with microtubules distributed around pronuclei (83.5 +/- 3.4%) was similar to that of vitrified embryos (74.7 +/- 2.5%). In conclusion, vitrification affected mitochondrial distribution and decreased the mitochondrial membrane potential in mouse 2-PN embryos, events which may affect subsequent developmental viability of such embryos.

Effect of droplet vitrification on development competence, actin cytoskeletal integrity and gene expression in in vitro cultured mouse embryos

The effect of modified droplet vitrification was assessed on cellular actin filament organization, apoptosis related gene expression and development competence in mouse embryos cultured in vitro. Mouse zygotes, 2-cell embryos and morulae were vitrified in ethylene glycol (VS-1) and ethylene glycol plus DMSO (VS-2) and thawed by directly placing the vitrified drop into 0.3M sucrose solution at 37 degrees C. High recovery (93-99%) of morphologically normal embryos was evident following vitrification and thawing. No detectable actin filament disruption was observed in the embryos at any development stage following vitrification and thawing and/or in vitro culture. The expression pattern of Bax, Bcl2 and p53 genes was altered (P<0.05) in vitrified zygotes and 2-cell embryos, but not in morulae. Although a large proportion of the vitrified zygotes (59.5+/-4.4% in VS-1 and 57.9+/-4.5% in VS-2; mean+/-S.E.M.) and 2-cell embryos (63.1+/-4.4% in VS-1 and 59.2+/-4.3% in VS-2) developed into blastocysts, development of control embryos (70.2+/-5.0% of zygotes and 75.5+/-4.4% of 2-cell embryos) into blastocysts was higher (P<0.05). In contrast, development of the control and vitrified morulae into blastocysts (more than 85%) was similar. We concluded that the modified droplet vitrification procedure supported better survival of morula stage compared to zygotes and 2-cell mouse embryos.

Vitrification of in vitro matured oocytes of Mangalica and Large White pigs

The breeding of Mangalica, a native pig breed in Hungary, had been started in 1833, but this pig breed almost became extinct in Hungary in the past decades. In 1991, the number of sows was only 200. Although in these days the existing Mangalica population consists of more than 6000 animals representing different colour variations, the preservation of this traditional pig breed is still very important. Vitrification is a potential tool for the preservation of gametes and embryos of these animals. The aim of this study was to investigate the effects of vitrification on the developmental competence of Mangalica (M) and Large White (LW) oocytes following fertilisation. The oocytes were vitrified by the Open Pulled Straw (OPS) method using different concentrations of ethylene glycol and dimethyl sulphoxide as cryoprotectants. After rehydration the oocytes underwent in vitro fertilisation; the resultant zygotes were then cultured in vitro for four days to assess embryonic development. In the first experiment, in vitro maturation of M and LW oocytes was compared. No significant difference was observed in the nuclear maturation rate of LW and M oocytes. In the second experiment, the sensitivity of oocytes to vitrification was examined by evaluating oocyte morphology after thawing. A higher percentage of LW oocytes showed normal morphology compared to M oocytes, indicating that Mangalica oocytes are more sensitive to cryoprotectants than Large White oocytes. After warming and in vitro fertilisation, more than 50% of the oocytes started embryonic development and by the end of the incubation period morula stage embryos had developed in both groups. The results show that the OPS vitrification technique is well suited to preserve Mangalica oocytes and from these oocytes morula embryos can be produced.

Conventional freezing, straw, and open-pulled straw vitrification of mouse two pronuclear (2-PN) stage embryos

Little is known on the cryopreservation of mouse pronuclear (PN) stage embryos. In the present experiment the mouse 2-PN stage embryos were cryopreserved by conventional freezing, straw, or open-pulled straw (OPS) vitrificaiton methods. The conventional freezing solution was 1.5 mol/L ethylene glycol (EG), and vitrification solutions were EFS30 (30% EG, Ficoll, and sucrose), EFS40 (40% EG, Ficoll, and sucrose), EDFS30 (15% EG, 15%dimethyl sulfoxide [DMSO], Ficoll, and sucrose), or EDFS40 (20% EG, 20%DMSO, Ficoll, and sucrose). The blastocyst rate of 2-PN stage embryos cryopreserved by conventional method (30.4%) was lower than those vitrified by straw method with EDFS (56.9% to 69.1%), by OPS method (66.0% to 85.7%), and that of control (80.8%) (P < 0.05). With a given vitrificaiton solution EFS30, EFS40, EDFS30, or EDFS40, the blastocyst rate of embryos vitrified by the OPS method (66.7%, 66.0%, 85.7%, or 76.9%) was higher than that of those vitrified by the straw method (46.8%, 43.8%, 69.1%, or 56.9%) (P < 0.05). When mouse 2-PN-stage embryos were vitrified with EDFS30 by straw or OPS method, the highest blastocyst rate was achieved (69.1% or 85.7%) and was similar to that of the control, respectively. The embryos transfer results revealed that the full-term development of blastocysts derived from 2-PN stage embryos vitrified by OPS method with EDFS30 (19.9%) was similar to that of the control (23.5%), and higher than that of those cryopreserved by conventional freezing (9.3%) (P < 0.05). The present research demonstrates that the OPS method, especially with EDFS30, is more effective in cryopreserving mouse 2-PN embryos.

Gene expression and development of mouse zygotes following droplet vitrification

The concept of ultra-rapid vitrification has emerged in recent years; the accelerated cooling rate reduced injury attributed to cryopreservation and improved post-freezing developmental competence of vitrified oocytes and embryos. The objectives of the present study were to develop a simple and effective ultra-rapid vitrification method (droplet vitrification) and evaluate its effects on post-thaw development and apoptosis-related gene expression in mouse zygotes. Presumptive zygotes were equilibrated for 3 min in equilibration medium and washed 3 times in vitrification solution. A drop (5 microL) of vitrification solution containing 10-12 embryos was placed directly onto surface of liquid nitrogen, with additional liquid nitrogen poured over the drop. For thawing and cryoprotectant removal, vitrified drops were put into dilution medium for 3 min, followed by M2 medium for 5 min. Although cleavage rate did not differ significantly among the control (90.8+/-2.8%; mean+/-S.E.M.), toxicity control (83.5+/-3.2%), and vitrified (86.2+/-3.1%) zygotes, rates of blastocyst and hatched blastocyst formation were lower (P<0.01) in vitrified zygotes (49.7+/-4.7% and 36.0+/-4.7%) and toxicity controls (47.3+/-4.6% and 40.3+/-4.6%) compared with controls (65.5+/-4.1% and 54.2+/-4.3%). Exposure of zygotes to vitrification solution, as well as the vitrification process, down-regulated the expression of Bax, Bcl2, and p53 genes in blastocysts. Although droplet vitrification was efficient and easy, it altered the transcriptional activities of Bax, Bcl2, and p53 genes in vitrified embryos, indicating a strong relationship between reduced developmental competence and the altered transcriptional activities of these genes.

Cryogenic effect of antifreeze protein on transgenic mouse ovaries and the production of live offspring by orthotopic transplantation of cryopreserved mouse ovaries

The purpose of the present study was to evaluate the cryogenic effect of antifreeze protein (AFP) on transgenic mouse ovaries which is expressed AFP type III from Ocean pout and the production of live offspring by orthotopic transplantation of cryopreserved mouse ovaries. In this study, whole transgenic and nontransgenic mouse ovaries were vitrified with 20% DMSO and 20% EG in M2 medium supplemented with 0.5 M sucrose. All vitrified and toxicity control and fresh ovaries were transplanted orthotopically into ovariectomized recipients bilaterally. For fresh ovaries transplantation, 5 mice delivered litters of 18 and 19 live pups in first and second matings, respectively. For toxicity control of chemicals, 6 mice delivered litters of 22 and 23 live pups. For nontransgenic mouse ovaries (vitrified) transplantation, 7 mice delivered litters of 22 and 23 live pups. For transgenic mouse ovaries (vitrified) transplantation, 10 mice delivered litters of 35 and 37 live pups. Litter sizes from pups of freshly transplanted ovaries were not significantly different from AFP-transplanted transgenic ovaries but those from nontransgenic-transplanted ovaries were significantly different from the AFP-transplanted transgenic ovaries group (P < 0.05). In this study, for the first time, it was shown that the ovarian tissue of AFP transgenic mice was protected from cryopreservation by vitrification. These results demonstrate that a normal reproductive lifespan can be restored by orthotopic transplantation of AFP transgenic-vitrified ovary.

Preliminary studies on the vitrification of red sea bream (Pagrus major) embryos

The objective was to identify an appropriate cryoprotectant and protocol for vitrification of red sea bream (Pagrus major) embryos. The toxicity of five single-agent cryoprotectants, dimethyl sulfoxide (DMSO), propylene glycol (PG), ethylene glycol (EG), glycerol (GLY), and methyl alcohol (MeOH), as well as nine cryoprotectant mixtures, were investigated by comparing post-thaw hatching rates. Two vitrifying protocols, a straw method and a solid surface vitrification method (copper floating over liquid nitrogen), were evaluated on the basis of post-thaw embryo morphology. Exposure to single-agent cryoprotectants (10% concentration for 15 min) was not toxic to embryos, whereas for higher concentrations (20 and 30%) and a longer duration of exposure (30 min), DMSO and PG were better tolerated than the other cryoprotectants. Among nine cryoprotectant mixtures, the combination of 20% DMSO+10% PG+10% MeOH had the lowest toxicity after exposure for 10 min or 15 min. High percentages of morphologically intact embryos, 50.6+/-16.7% (mean+/-S.D.) and 77.8+/-15.5%, were achieved by the straw vitrifying method (20.5% DMSO+15.5% acetamide+10% PG, thawing at 43 degrees C and washing in 0.5M sucrose solution for 5 min) and by the solid surface vitrification method (40% GLY, thawing at 22 degrees C and washing in 0.5M sucrose solution for 5 min). After thawing, morphological changes in the degenerated embryos included shrunken yolks and ruptured chorions. Furthermore, thawed embryos that were morphologically intact did not consistently survive incubation.

A new selection criterion to assess good quality ovine blastocysts after vitrification and to predict their transfer into recipients

The feasibility to accurately select viable embryos would be valuable for improving pregnancy rates and avoiding futile transfer attempts. The aim of our study was to assess if in vitro-produced embryo quality could be determined by the timing of blastocoelic cavity re-expansion after vitrification, warming, and in vitro culture using sheep as a model. Blastocysts were produced in vitro, vitrified/warmed, and cultured in TCM-199 plus 10% FCS for 72 hr. Embryos were divided into two groups: re-expanded within 8 hr (A) and from 8 to 16 hr (B) of IVC after warming. Fast re-expanded blastocysts showed higher in vitro hatching rates and total cell number calculated on the hatched blastocysts compared with slow re-expanded ones (P < 0.01). Peroxide status evaluation (P < 0.01) and TUNEL test (P < 0.05) revealed a higher number of positive cells in group B compared with group A. The quantitative analysis of protein synthesis revealed a higher synthesis in fast compared with slow re-expanded embryos (P < 0.05). Quantitative RT-PCR showed that 90-kDa Heat Shock Protein beta was more expressed in group A than in group B (P < 0.05), while the quantity of P34(cdc2), Cyclin b, Aquaporin 3, Na/K ATPase, and Actin did not differ between the two groups. Pregnancy rates after transfer to synchronized recipients were higher in fast compared to slow re-expanded blastocysts (P < 0.05). Our results evidenced that timing of blastocoelic cavity re-expansion after vitrification/warming and in vitro culture can be considered as a reliable index of in vitro produced embryo quality and developmental potential.

Gene expression profiles of vitrified in vivo derived 8-cell stage mouse embryos detected by high density oligonucleotide microarrays

Very little is known about the effect of vitrification on gene functions after warming. The goals of our study were to compare the gene expression patterns, and identify those most affected. For this, 8-cell stage embryos were collected from ICR mice and vitrified with solid surface vitrification technique, while maintaining equal numbers of embryos as control. Total RNAs were extracted and two rounds of amplification were employed. Finally three micrograms of contrasting RNA samples were hybridized on the Agilent Mouse 22 K oligonucleotide slides and the results were analyzed with subsequent verification by independent real-time PCR analyses. The two rounds of amplification with 5 ng tRNA input have yielded 15-16 microg of cRNA. The analyses of repeated hybridizations showed 20,183 genes/ESTs as common signatures, and unsupervised analysis identified 628 differentially expressed (P < 0.01) genes. However, with at least 1.5-fold change considerations, 183 genes were differentially expressed (P < 0.01) out of which 107 were upregulated. The independent analysis with real-time PCR and unamplified samples fully confirmed the results of microarray, indicating the linearity of amplification. Furthermore, this novel gene expression study for vitrified embryos identified many new candidate genes with overrepresentation in some important biological processes. Thus, it is possible to conclude that the expression pattern reflected a broad spectrum of consequences of vitrification on embryos, with most effects on metabolism, regulatory role and stress response genes and allowed the identification of new candidate marker genes for cryosurvival.

The effect of equilibration time on survival and development rates of mouse pronuclear-stage embryos vitrified in solid surface (SSV) and convential straws: In vitro and In vivo evaluations

The objective of this study was to improve the efficiency of cryopreservation of pronuclear-stage (PN) mouse embryos. A novel vitrification technique (solid surface vitrification, SSV) was compared with a convential one in straws both for cryosurvival and obtaining progeny from cryopreserved PN mouse embryos. In the SSV method, 15-20 PN embryos were exposed to vitrification solutions for approximately 20 sec after equilibration, and then they were dropped in 2 microl drops onto a pre-cooled (-150 to -180 degrees C) metal surface. In the straws method, groups of 5-10 PN embryos were loaded in a single straw after equilibration. In experiment I, it was compared the effect of the vitrification solutions alone, without vitrification. No reduction was detected in survival, cleavage and blastocysts rates and the lowest development rate was obtained from hatched blastocyst for 20 min equilibration (24.5%). In experiment II, SSV method resulted in significantly higher survival and cleavage rates than that of in-straw vitrified 15-20 min group (87% vs. 60%, 83% vs. 67%, respectively; P < 0.05). There were no statistical differences among any of the blastocyts groups. However, there was a statistical difference in hatched blastocysts between 15 to 5, 10, and 20 min (P < 0.05). In experiment III, it was found no major effect among equilibration time periods in toxicity groups according to the mean cell number of blastocysts developed from PN embryos. But, there was a significant differences between 15 min SSV and 10 min in straw vitrified according to the mean cell number of blastocysts developed from PN embryos following vitrification (P < 0.05). The good results were obtained from 15 min equilibration group for SSV and 10 min equilibration group for straw vitrification. In the last experiment, embryo transfer after vitrification and toxicity was investigated. There were significant differences between SSV and straw just on the rate of pups born (30% and 20.5% respectively; P < 0.05). In conclusion, vitrification of PN mouse embryos by SSV can result in high rates of in vitro development to expanded and hatched blastocyst stage and in vivo development to live pups.

Effect of chemically defined culture medium supplemented with ?-mercaptoethanol and amino acids on implantation and development of different stage in vivo- or in vitro-derived mouse embryos

In vitro culture (IVC) systems are required for many biotechnological and assisted reproductive technologies and the researchers have been modifying in vitro embryo culture conditions to reach the comparable efficiencies provided in vivo. In the present study, the effects of beta-mercaptoethanol (Beta-ME) and amino acids (AA) on the development of mouse embryos obtained in vivo or in vitro at different stages were investigated. Chemically defined potassium simplex optimized medium (KSOM) was used as basic culture medium and six experimental groups were established and by supplementation of Beta-ME and AA into KSOM media. The quality of blastocysts was evaluated by counting the cells and determining the ratio of inner cell mass (ICM) to trophoectoderm (TE) cells. In addition, embryo transfer (ET) was performed to investigate the rate of implantation and live fetuses. The results obtained in the present study demonstrated that the combined treatment of Beta-ME and AA to 1-cell stage embryos not only enhanced in vitro development to the blastocyst stage but also improved both the number of blastocysts cells and live fetuses.