Parallel excitation for B-field insensitive fat-saturation preparation

Quadrature transmit array design using single-feed circularly polarized patch antenna for parallel transmission in MR imaging

Quadrature coils are often desired in MR applications because they can improve MR sensitivity and also reduce excitation power. In this work, we propose, for the first time, a quadrature array design strategy for parallel transmission at 298 MHz using single-feed circularly polarized (CP) patch antenna technique. Each array element is a nearly square ring microstrip antenna and is fed at a point on the diagonal of the antenna to generate quadrature magnetic fields. Compared with conventional quadrature coils, the single-feed structure is much simple and compact, making the quadrature coil array design practical. Numerical simulations demonstrate that the decoupling between elements is better than -35 dB for all the elements and the RF fields are homogeneous with deep penetration and quadrature behavior in the area of interest. Bloch equation simulation is also performed to simulate the excitation procedure by using an 8-element quadrature planar patch array to demonstrate its feasibility in parallel transmission at the ultrahigh field of 7 Tesla.

Four dimensional spectral-spatial fat saturation pulse design

PURPOSE

The conventional spectrally selective fat saturation pulse may perform poorly with inhomogeneous amplitude of static (polarizing) field (B0 ) and/or amplitude of (excitation) radiofrequency field (B1 ) fields. We propose a four dimensional spectral-spatial fat saturation pulse that is more robust to B0/B1 inhomogeneity and also shorter than the conventional fat saturation pulse.

THEORY

The proposed pulse is tailored for local B0 inhomogeneity, which avoids the need of a sharp transition band in the spectral domain, so it improves both performance and pulse length. Furthermore, it can also compensate for B1 inhomogeneity. The pulse is designed sequentially by small-tip-angle approximation design and an automatic rescaling procedure.

METHODS

The proposed method is compared to the conventional fat saturation in phantom experiments and in vivo knee imaging at 3 T for both single-channel and parallel excitation versions.

RESULTS

Compared to the conventional method, the proposed method produces superior fat suppression in the presence of B0 and B1 inhomogeneity and reduces pulse length by up to half of the standard length.

CONCLUSION

The proposed four dimensional spectral-spatial fat saturation suppresses fat more robustly with shorter pulse length than the conventional fat saturation in the presence of B0 and B1 inhomogeneity.

On-coil multiple channel transmit system based on class-D amplification and pre-amplification with current amplitude feedback

A complete high-efficiency transmit amplifier unit designed to be implemented in on-coil transmit arrays is presented. High power capability, low power dissipation, scalability, and cost minimization were some of the requirements imposed to the design. The system is composed of a current mode class-D amplifier output stage and a voltage mode class-D preamplification stage. The amplitude information of the radio frequency pulse was added through a customized step-down DC-DC converter with current amplitude feedback that connects to the current mode class-D stage. Benchtop measurements and imaging experiments were carried out to analyze system performance. Direct control of B1 was possible and its load sensitivity was reduced to less than 10% variation from unloaded to full loaded condition. When using the amplifiers in an array configuration, isolation above 20 dB was achieved between neighboring coils by the amplifier decoupling method. High output current operation of the transmitter was proved on the benchtop through output power measurements and in a 1.5T scanner through flip angle quantification. Finally, single and multiple channel excitations with the new hardware were demonstrated by receiving signal with the body coil of the scanner.