Combined 23 Na and 13 C imaging at 3.0 Tesla using a single-tuned large FOV birdcage coil

Quantitative 23Na magnetic resonance imaging in the abdomen at 3 T

OBJECTIVES

To assess the feasibility of sodium-23 MRI for performing quantitative and non-invasive measurements of total sodium concentration (TSC) and relaxation in a variety of abdominal organs.

MATERIALS AND METHODS

Proton and sodium imaging of the abdomen was performed in 19 healthy volunteers using a 3D cones sequence and a sodium-tuned 4-rung transmit/receive body coil on a clinical 3 T system. The effects of B1 non-uniformity on TSC measurements were corrected using the double-angle method. The long-component of 23Na T2* relaxation time was measured using a series of variable echo-times.

RESULTS

The mean and standard deviation of TSC and long-component 23Na T2* values were calculated across the healthy volunteer group in the kidneys, cerebrospinal fluid (CSF), liver, gallbladder, spleen, aorta, and inferior vena cava.

DISCUSSION

Mean TSC values in the kidneys, liver, and spleen were similar to those reported using 23Na-MRI previously in the literature. Measurements in the CSF and gallbladder were lower, potentially due to the reduced spatial resolution achievable in a clinically acceptable scan time. Mean long-component 23Na T2* values were consistent with previous reports from the kidneys and CSF. Intra-population standard error was larger in smaller, fluid-filled structures due to fluid motion and partial volume effects.

Daytime Variation in Kidney Perfusion, Oxygenation, and Sodium Concentration Assessed by Multiparametric MRI in Healthy Volunteers

BACKGROUND

MRI can provide information on kidney structure, perfusion, and oxygenation. Furthermore, it allows for the assessment of kidney sodium concentrations and handling, allowing multiparametric evaluation of kidney physiology. Multiparametric MRI is promising for establishing prognosis and monitoring treatment responses in kidney diseases, but its intraindividual variation during the day is unresolved.

PURPOSE

To investigate the variation in multiparametric MRI measurements from the morning to the evening.

STUDY TYPE

Prospective.

POPULATION

Ten healthy volunteers, aged 29 ± 5 without history of kidney disease.

FIELD STRENGTH/SEQUENCE

3 T/T1 mapping, blood-oxygen level dependent imaging, arterial spin labeling perfusion imaging, diffusion weighted imaging, and sodium imaging.

ASSESSMENT

A multiparametric MRI protocol, yielding T1, R2*, ADC, renal blood flow and renal sodium levels, was acquired in the morning, noon, and evening. The participants were fasting prior to the first examination. Urine biochemical analyses were performed to complement MRI data. The cortex and medulla were analyzed separately in a semi-automatic fashion, and gradients of total sodium concentration (TSC) and R2* gradients were calculated from outer cortex to inner medulla.

STATISTICAL TEST

Analyses of variance and mixed-effects models to estimate differences from time of day. Coefficients of variation to assess variability within and between participants. A P-value <0.05 was considered statistically significant.

RESULTS

The coefficients of variation varied from 5% to 18% for proton-based parametric sequences, while it was 38% for TSC over a day.

DATA CONCLUSION

Multiparametric MRI is stable over the day. The coefficients of variation over a day were lower for proton multiparametric MRI, but higher for sodium MRI.

EVIDENCE LEVEL

2 TECHNICAL EFFICACY: Stage 2.

Interleaved and simultaneous multi-nuclear magnetic resonance in vivo. Review of principles, applications and potential

Magnetic resonance signals from different nuclei can be excited or received at the same time,rendering simultaneous or rapidly interleaved multi-nuclear acquisitions feasible. The advan-tages are a reduction of total scan time compared to sequential multi-nuclear acquisitions or that additional information from heteronuclear data is obtained at thesame time and anatomical position. Information content can be qualitatively increased by delivering a more comprehensive MR-based picture of a transient state (such as an exercise bout). Also, combiningnon-proton MR acquisitions with ¹ Hinformation (e.g., dynamic shim updates and motion correction) can be used to improve data quality during long scans and benefits image coregistration. This work reviews the literature on interleaved and simultaneous multi-nuclear MRI and MRS in vivo. Prominent use cases for this methodology in clinical and research applications are brain and muscle, but studies have also been carried out in other targets, including the lung, knee, breast and heart. Simultaneous multi-nuclear measurements in the liver and kidney have also been performed, but exclusively in rodents. In this review, a consistent nomenclature is proposed, to help clarify the terminology used for this principle throughout the literature on in-vivo MR. An overview covers the basic principles, the technical requirements on the MR scanner and the implementations realised either by MR system vendors or research groups, from the early days until today. Considerations regarding the multi-tuned RF coils required and heteronuclear polarisation interactions are briefly discussed, and fields for future in-vivo applications for interleaved multi-nuclear MR pulse sequences are identified.

RF coil design for accurate parallel imaging on 13 C MRSI using 23 Na sensitivity profiles

PURPOSE

To develop a coil-based method to obtain accurate sensitivity profiles in ¹³ C MRI at 3T from the endogenous ²³ Na. An eight-channel array is designed for ¹³ C MR acquisitions. As application examples, the array is used for two-fold accelerated acquisitions of both hyperpolarized ¹³ C metabolic imaging of pig kidneys and the human brain.

METHODS

A flexible coil array was tuned optimally for ¹³ C at 3T (32.1 MHz), with the coil coupling coefficients matched to be nearly identical at the resonance frequency of ²³ Na (33.8 MHz). This is done by enforcing a high decoupling (obtained through highly mismatched preamplifiers) and adjusting the coupling frequency response. The SNR performance is compared to reference coils.

RESULTS

The measured sensitivity profiles on a phantom showed high spatial similarity for ¹³ C and ²³ Na resonances, with average noise correlation of 9 and 11%, respectively. For acceleration factors 2, 3, and 4, the obtained maximum g-factors were 1.0, 1.1, and 2.6, respectively. The ²³ Na profiles obtained in vivo could be used successfully to perform two-fold acceleration of hyperpolarized ¹³ C 3D acquisitions of both pig kidneys and a healthy human brain.

CONCLUSION

A receive array has been developed in such a way that the ¹³ C sensitivity profiles could be accurately obtained from measurements at the ²³ Na frequency. This technique facilitates accelerated acquisitions for hyperpolarized ¹³ C imaging. The SNR performance obtained at the ¹³ C frequency, compares well to other state-of-the-art coils for the same purpose, showing slightly better superficial and central SNR.

A Preliminary Study for Reference RF Coil at 11.7 T MRI: Based on Electromagnetic Field Simulation of Hybrid-BC RF Coil According to Diameter and Length at 3.0, 7.0 and 11.7 T

Magnetic resonance imaging (MRI) systems must undergo quantitative evaluation through daily and periodic performance assessments. In general, the reference or standard radiofrequency (RF) coils for these performance assessments of 1.5 to 7.0 T MRI systems have been low-pass-type birdcage (LP-BC) RF coils. However, LP-BC RF coils are inappropriate for use as reference RF coils because of their relatively lower magnetic field (B₁-field) sensitivity than other types of BC RF coils, especially in ultrahigh-field (UHF) MRI systems above 3.0 T. Herein, we propose a hybrid-type BC (Hybrid-BC) RF coil as a reference RF coil with improved B₁-field sensitivity in UHF MRI system and applied it to an 11.7 T MRI system. An electromagnetic field (EM-field) analysis on the Hybrid-BC RF coil was performed to provide the proper dimensions for its use as a reference RF coil. Commercial finite difference time-domain program was used in EM-field simulation, and home-made analysis programs were used in analysis. The optimal specifications of the proposed Hybrid-BC RF coils for them to qualify as reference RF coils are proposed based on their B₁⁺-field sensitivity under unnormalized conditions, as well as by considering their B₁⁺-field uniformity and RF safety under normalized conditions.