Catalytic Chain Transfer Copolymerization of Propylene Oxide and CO2 using Zinc Glutarate Catalyst

Poly(Propylene Carbonate)-Based Biodegradable and Environment-Friendly Materials for Biomedical Applications

Poly(propylene carbonate) (PPC) is an emerging "carbon fixation" polymer that holds the potential to become a "biomaterial of choice" in healthcare owing to its good biocompatibility, tunable biodegradability and safe degradation products. However, the commercialization and wide application of PPC as a biomedical material are still hindered by its narrow processing temperature range, poor mechanical properties and hydrophobic nature. Over recent decades, several physical, chemical and biological modifications of PPC have been achieved by introducing biocompatible polymers, inorganic ions or small molecules, which can endow PPC with better cytocompatibility and desirable biodegradability, and thus enable various applications. Indeed, a variety of PPC-based degradable materials have been used in medical applications including medical masks, surgical gowns, drug carriers, wound dressings, implants and scaffolds. In this review, the molecular structure, catalysts for synthesis, properties and modifications of PPC are discussed. Recent biomedical applications of PPC-based biomaterials are highlighted and summarized.

Multinuclear Zinc-Magnesium Hydroxide Carboxylates: A Predesigned Model System for Copolymerization of CO2 with Epoxides

Among numerous catalysts in the ring-opening copolymerization of epoxides with carbon dioxide (CO2), zinc dicarboxylate complexes are the most common type, and in the family of metal-based homogeneous catalysts, zinc and magnesium complexes have attracted widespread attention. We report on the synthesis and structural characterization of a zinc-magnesium benzoate framework templated by the central hydroxide anion with μ3-κ2:κ2:κ2 coordination mode, [ZnMg2(μ3-OH)(O2CPh)5]n (n = 1 or 2). The resulting heterometallic system forms stable Lewis acid-base adducts with tetrahydrofuran (THF) and cyclohexene oxide (CHO), which crystallize as the hexanuclear zinc-magnesium hydroxide carboxylate cluster [ZnMg2(μ3-OH)(O2CPh)5(L)2]2 (L = THF or CHO). Their X-ray crystal structure analysis revealed that the Zn center prefers 4-fold coordination and the Mg centers demonstrated the ability to accommodate higher coordination numbers, and as a result, the heterocyclic molecules are exclusively bonded to 6-fold Mg atoms. The heteronuclear carboxylate aggregates appeared active in the copolymerization reaction at elevated temperatures to produce an alternating poly(cyclohexene carbonate).

Novel salenCo(iii) photoinitiators and their application for cycloaddition of carbon dioxide

Carbon dioxide (CO₂) is a renewable carbon resource that can be effectively used in the production of polycarbonate (PPC) and cyclic carbonate (CPC) through open-loop copolymerization with epoxides and CO₂. SalenCo(iii) can successfully break the carbon-oxygen link between propylene oxide (PO) and CO₂. On this basis, we prepared four different types of photosensitive salenCo(iii) complexes and investigated their catalytic copolymerization of CO₂ and PO. The results show that the catalytic performance of 1,2-cyclohexamediamine complexes is better than that of 1,2-o-phenylenediamine complexes. The catalytic efficiency of salenCo(iii) catalyst increases with the expansion of the photosensitive conjugate system. In addition, the introduction of light can improve the catalytic efficiency. When we increased the power of the external light source from 100 W to 200 W, the TON of the catalyst [C4] increased by nearly 50%.

DMC-Mediated Copolymerization of CO2 and PO—Mechanistic Aspects Derived from Feed and Polymer Composition

The influence of composition of liquid phase on composition of poly(propylene ether carbonates) in the copolymerization of CO2 with propylene oxide (PO), mediated by a zinc chloride cobalt double metal cyanide, was monitored by FT-IR/CO2 uptake/size exclusion chromatography in batch and semi-batch mode. The ratio of mol fractions of carbonate to ether linkages F (~0.15) was found virtually independent on the feed between 60 and 120 °C. The presence of CO2 lowers the catalytic activity but yields more narrowly distributed poly(propylene ether carbonates). Hints on diffusion and chemistry-related restrictions were found underlying, broadening the distribution. The incorporation of CO2 seems to proceed in a metal-based insertion chain process, ether linkages are generated stepwise after external nucleophilic attack. The presence of amines resulted in lower activities and no change in F. An exchange of chloride for nitrate in the catalyst led to a higher F of max. 0.45. The observations are interpreted in a mechanistic scheme, comprising surface-base-assisted nucleophilic attack of external weak nucleophiles and of mobile surface-bound carboxylato entities on activated PO in competition to protonation of surface-bound alkoxide intermediates by poly(propylene ether carbonate) glycols or by surface-bound protons. Basic entities on the catalyst may promote CO2 incorporation.

Catalytic Chain Transfer Copolymerization of Propylene Oxide and CO2 using Zinc Glutarate Catalyst

Oligo and poly(propylene ether carbonate)-polyols with molecular weights from 0.8 to over 50 kg/mol and with 60-92 mol % carbonate linkages were synthesized by chain transfer copolymerization of carbon dioxide (CO2) and propylene oxide (PO) mediated by zinc glutarate. Online-monitoring of the polymerization revealed that the CTA controlled copolymerization has an induction time which is resulting from reversible catalyst deactivation by the CTA. Latter is neutralized after the first monomer additions. The outcome of the chain transfer reaction is a function of the carbonate content, i. e. CO2 pressure, most likely on account of differences in mobility (diffusion) of the various polymers. Melt viscosities of poly(ether carbonate)diols with a carbonate content between 60 and 92 mol % are reported as function of the molecular weight, showing that the mobility is higher when the ether content is higher. The procedure of PO/CO2 catalytic chain copolymerization allows tailoring the glass temperature and viscosity.