Ionic Liquid Based Polymer Gel Electrolytes for Use with Germanium Thin Film Anodes in Lithium Ion Batteries

Composite polymer electrolyte facilitated by enhanced amorphousity and Li+ conduction using LaFeO3-embedded PVDF-HFP for solid-state lithium metal battery

Composite polymer electrolytes (CPEs) are a promising alternative to flammable conventional liquid electrolytes for high-safety lithium-ion batteries. Establishing low-cost filler that enhances the amorphous nature of polymer in the CPEs and exhibits efficient Lewis acid-base interaction between fillers and anions of lithium salt, leading to improved dissociation of salts for enhanced conduction, is indispensable. In this work, for the first time, we construct a solid composite polymer electrolyte of poly(vinylidene fluoride hexafluoropropylene) embedded LaFeO3 (LFO) particles prepared by solution casting and electrospinning methods and study their performances. The 5 wt% LFO filler embedded CPE made by means of solution casting and electrospinning methods exhibited the highest ionic conductivity of 5.9 × 10-4 and 1.49 × 10-3 S cm-1 at room temperature and electrochemical stability window up to 4.6 and 4.45 V, respectively. Further, as-assembled solid-state lithium-ion batteries using electrospun CPE showed an initial discharge capacity of 166 mAh/g at 0.1C-rate and solution-casted CPE showed excellent cycling stability with 98.6 % capacity retention at 0.3C-rate even at 50th cycle. Such excellent performance originated from the introduction of the LFO particles as filler into the polymer matrix to enhance the ionic conductivity, mechanical strength and lithium metal compatibility of the resulting CPEs.

Recent advances in poly(ionic liquid)s for biomedical application

Poly(ionic liquid)s (PILs) are polymers containing ions in their side-chain or backbone, and the designability and outstanding physicochemical properties of PILs have attracted widespread attention from researchers. PILs have specific characteristics, including negligible vapor pressure, high thermal and chemical stability, non-flammability, and self-assembly capabilities. PILs can be well combined with advanced analytical instruments and technology and have made outstanding contributions to the development of biomedicine aiding in the continuous advancement of science and technology. Here we reviewed the advances of PILs in the biomedical field in the past five years with a focus on applications in proteomics, drug delivery, and development. This paper aims to engage pharmaceutical and biomedical scientists to full understand PILs and accelerate the progress from laboratory research to industrialization.

Pyrrolidinium Containing Ionic Liquid Electrolytes for Li-Based Batteries

Ionic liquids are potential alternative electrolytes to the more conventional solid-state options under investigation for future energy storage solutions. This review addresses the utilization of IL electrolytes in energy storage devices, particularly pyrrolidinium-based ILs. These ILs offer favorable properties, such as high ionic conductivity and the potential for high power drain, low volatility and wide electrochemical stability windows (ESW). The cation/anion combination utilized significantly influences their physical and electrochemical properties, therefore a thorough discussion of different combinations is outlined. Compatibility with a wide array of cathode and anode materials such as LFP, V₂O₅, Ge and Sn is exhibited, whereby thin-films and nanostructured materials are investigated for micro energy applications. Polymer gel electrolytes suitable for layer-by-layer fabrication are discussed for the various pyrrolidinium cations, and their compatibility with electrode materials assessed. Recent advancements regarding the modification of typical cations such a 1-butyl-1-methylpyrrolidinium, to produce ether-functionalized or symmetrical cations is discussed.

Characterization of Local Structures of Confined Imidazolium Ionic Liquids in PVdF-co-HFP Matrices by High Pressure Infrared Spectroscopy

The nanoscale ion ordering of ionic liquids at confined interfaces under high pressures was investigated in this study. 1-Hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([HMIM][NTf₂])/poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-co-HFP) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂])/PVdF-co-HFP were prepared and characterized by using high-pressure infrared spectroscopy. Under ambient pressure, imidazolium C²–H and C^4,5–H absorptions were blue-shifted in frequency due to the presence of PVdF-co-HFP. However, the absorption of anionic ν_a SO₂ did not reveal any significant shifts in frequency upon dilution by PVdF-co-HFP. The experimental results suggest that PVdF-co-HFP disturbs the local structures of the imidazolium C–H groups instead of the anionic SO₂ groups. The frequency shifts of C^4,5–H became dramatic for the mixtures at high pressures. These results suggest that pressure-enhanced ionic liquid–polymer interactions may play an appreciable role in IL-PVdF-co-HFP systems under high pressures. The pressure-induced blue-shifts due to the PVdF-co-HFP additions were more obvious for the [HMIM][NTf₂] mixtures than for [EMIM][NTf₂] mixtures.

Ionic Liquid Based Polymer Gel Electrolytes for Use with Germanium Thin Film Anodes in Lithium Ion Batteries

Thermally stable, flexible polymer gel electrolytes with high ionic conductivity are prepared by mixing the ionic liquid 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (C4mpyrTFSI), LiTFSI and poly(vinylidene difluoride-co-hexafluoropropylene (PVDF-HFP). FT-IR and Raman spectroscopy show that an amorphous film is obtained for high (60 %) C4mpyrTFSI contents. Thermogravimetric analysis (TGA) confirms that the polymer gels are stable below ∼300 °C in both nitrogen and air environments. Ionic conductivity of 1.9×10-3 S cm-2 at room temperature is achieved for the 60 % ionic liquid loaded gel. Germanium (Ge) anodes maintain a coulombic efficiency above 95 % after 90 cycles in potential cycling tests with the 60 % C4mpyrTFSI polymer gel.