Dispersion of Hydrophilic Nanoparticles in Natural Rubber with Phospholipids

Coarse-grained molecular dynamics (CGMD) simulations were employed to investigate the effects of phospholipids on the aggregation of hydrophilic, modified carbon-nanoparticle fillers in cis-polyisoprene (cis-PI) composites. The MARTINI force field was applied to model dipalmitoylphosphatidylcholine (DPPC) lipids and hydrophilic modified fullerenes (HMFs). The simulations of DPPC in cis-PI composites show that the DPPC lipids self-assemble to form a reverse micelle in a rubber matrix. Moreover, HMF molecules readily aggregate into a cluster, in agreement with the previous studies. Interestingly, the mixture of the DPPC and HMF in the rubber matrix shows a cluster of HMF is encapsulated inside the DPPC reverse micelle. The HMF encapsulated micelles disperse well in the rubber matrix, and their sizes are dependent on the lipid concentration. Mechanical and thermal properties of the composites were analyzed by calculating the diffusion coefficients (D), bulk modulus (κ), and glass transition temperatures (Tg). The results suggest that DPPC acts as a plasticizer and enhances the flexibility of the HMF-DPPC rubber composites. These findings provide valuable insights into the design and process of high-performance rubber composites, offering improved mechanical and thermal properties for various applications.

Confinement of Oligopeptides by Terminally Functionalized Polyisoprene to Improve Their Mechanical Strength, Creep Resistance, and Antifatigue Properties

A small amount of terminal polar phase endows natural rubber (NR) with excellent comprehensive properties superior to those of synthetic isoprene rubber. In this work, the comprehensive properties of synthetic rubber were remarkably improved by introducing a stable terminal nanoconfinement structure by combining terminal hydroxyl groups and pentapeptide molecules noncovalently into the same phases. The results show that the stable terminal phases hardly affect the free chain motion but enhance the entanglement. Under cyclic loading, the terminal polar phases undergo hierarchically structural changes such as reversible dissociation of the weak bonds, phase deformation, and crystalline reorganization, all of which dissipate the stress and are beneficial for high strength and extensibility. At the same time, synthetic rubbers demonstrate much superior fatigue resistance and lower hysteresis relative to NR and maintain comparable dimensional stability. This strategy suggests that the comprehensive properties of elastomers can be regulated and upgraded by facile terminal noncovalent interactions.

Influence of Clones on Relationship between Natural Rubber and Size of Rubber Particles in Latex

IAN873, Dongfang93114 and Reyan73397, created through vegetative propagation for their high yield and excellent cold resistance, are major clones planted in China. In this work, latexes with rubber particles of the same size from these clones are separated from fresh natural rubber latex, and corresponding rubber films are prepared from each latex. The structure and components of each film are measured. This indicates that the characteristics of the rubbers obtained from latexes with similar particle sizes show some resembling trends among different clones, while for specific samples, those characteristics vary depending on the clone. The molecular weight is generally highest in IAN873 and lowest in Reyan73397. Rubber chains in small rubber particles are longer, and large rubber particles show a wider molecular weight distribution. The gel content of every sample from Reyan73397 is lower than the other two clones. The nitrogen content increases with the size of rubber particles in all clones. The ester content of small rubber particles in IAN873 and Reyan73397 is almost zero. Large rubber particles have more branching points formed via esters. This study provides a new perspective on the influence of clones on the relationship between characteristics of natural rubber and the size of rubber particles in natural rubber latex.

Microstructure and Lamellae Phase of Raw Natural Rubber via Spontaneous Coagulation Assisted by Sugars

Natural rubber (NR) as a renewable biopolymer is often produced by acid coagulation of fresh natural latex collected from Hevea brasiliensis. However, this traditional process is facing a huge economic and environmental challenge. Compared with the acid coagulation, spontaneous or microorganism coagulation is an ecofriendly way to obtain NR with excellent performance. To clarify the influence of different sugars on NR quality, several sugars were used to assist the coagulation process. Influence of different sugars on microstructure and cold crystallization were examined by ¹H NMR, DSC, etc. The results indicated that sugars exhibit different biological activity on terminal components of fresh field latex and can influence the resultant molecular structure and basic properties. Brown sugar exhibits higher metabolic activity and is inclined to decompose the protein and phospholipids crosslinking compared with other sugars. The larger molecular weight of sugar molecule is beneficial for the formation of the stable α lamellae phase and higher overall degree of crystallization.

The Role of Non-Rubber Components on Molecular Network of Natural Rubber during Accelerated Storage

Though the non-rubber components have long been recognized to be a vital factor affecting the network of natural rubber (NR), the authentic role of non-rubber components on the network during accelerated storage has not been fully illuminated. This work attempts to clarify the impact of non-rubber components on the network for NR during accelerated storage. A natural network model for NR was proposed based on the gel content, crosslinking density, and the non-rubber components distribution for NR before and after centrifugation. Furthermore, the effect of non-rubber components on the network was investigated during accelerated storage. The results show that terminal crosslinking induced by non-rubber components and entanglements are primary factors affecting the network formation during accelerated storage. By applying the tube model to analyze the stress-strain curves of NR, we found that the contribution of the entanglements to the network formation is larger than that of terminal crosslinking during accelerated storage. The work highlights the role of non-rubber components on the network during accelerated storage, which is essential for understanding the storage hardening mechanism of NR.

Effect of protein on the thermogenesis performance of natural rubber matrix

Under high-speed strain, the thermogenesis performance of natural rubber products is unstable, leading to aging and early failure of the material. The quality of rubber latex and eventually that of the final products depends among others on the protein content. We found that when the protein is almost removed, the heat generated by the vulcanized rubber increases rapidly. After adding soy protein isolate to the secondary purification rubber, the heat generation of the vulcanized rubber is reduced, and the heat generation is the lowest when the added amount is 2.5–3.0 phr, which on account of protein promotes the construction of a vulcanization network and increases the rigidity of the rubber chain, resulting in a decrease in the potential frictional behavior of the rubber chain during the curl up-extension process.

Natural rubber-SiO2 nanohybrids: interface structures and dynamics

Homogeneous dispersion of silica nanoparticles (SiO₂ NPs) in natural rubber (NR) is a key challenge for engineering high-performance nanocomposites and elucidation of their structure on a molecular basis. Towards this, the present work devised a novel route for obtaining 3D self-assembled SiO₂ NP-NR nanocomposites under aqueous conditions and in the presence of Mg²⁺, by establishing a molecular bridge that clamped the negatively charged NR and SiO₂ colloidal particles with a favoured NR-SiO₂ NP hetero-aggregation. The characteristic NR-SiO₂ NP hetero-aggregates displayed a decreased heat capacity with increase in the SiO₂ mass-fraction, implying a restricted NR chain mobility. Such changes in the interfacial layers were tapped by ²⁹Si NMR, DFT calculations and molecular dynamics simulations towards a mechanistic understanding of the structure and dynamics of the NR/SiO₂ NP hybrid. Simple models were used to illustrate basic ideas; specific electrostatic interactions such as ion-dipole and H-bonding interactions proved to be the driving forces for the organized assembly leading to the NR-SiO₂ hetero-aggregate over the NR-NR or SiO₂ NP-SiO₂ NP homo-aggregate. Molecular dynamics simulation of the aqueous canonical ensemble of the hybrid showed the stable molecular conformation to reveal a SiO₂ NP spherical core encapsulated by a hydrophobically interconnected NR polymer layer as the outer shell, as a unique structural model. Specifically, the lipid end of the NR was involved electrostatically while the lysine end (the protein part of NR) H-bonded to the core silica cluster thereby restricting random aggregation. The calculated negative free energy changes for the hetero-aggregate composites via their vibrational and rotational spectra proved the spontaneity of composite formation.

Distribution of Nanodiamond Inside the Nanomatrix in Natural Rubber

The distribution of nanodiamond inside a nanomatrix, which is related to the mechanical and viscoelastic properties, is investigated for a natural rubber-nanodiamond composite. The composite is prepared by reacting nanodiamond with deproteinized natural rubber (NR-ND) in the presence of a tert-butylhydroperoxide (TBHPO)/tetraethylenepentamine (TEPA) radical initiator at 30 °C in the latex stage and subsequent drying. The morphology of the composite is observed by three-dimensional transmission electron microscopy. NR-ND prepared with an initiator exhibits a nanomatrix structure, whereas NR-ND prepared without an initiator displays an island matrix structure. The nanomatrix is densely loaded with 15 nm or smaller-sized nanodiamond. Both the mechanical and viscoelastic properties of NR-ND depend upon the morphology. The stress at break and the plateau modulus are 12 MPa and 1.19 × 10⁶ Pa, respectively, when NR-ND is prepared with a TBHPO/TEPA initiator and contains 25 w/w % nanodiamond, which are 4 and 8 times higher than those of deproteinized natural rubber, respectively.