The engineering and immobilization of penicillin G acylase onto thermo-sensitive tri-block copolymer system

Optimization of a medium composition for the heterologous production of Alcaligenes faecalis penicillin G acylase in Bacillus megaterium

Penicillin G acylase (PGA) is a strategic enzyme in the production processes of beta-lactam antibiotics. High demand for β-lactam semisynthetic antibiotics explain the genetic and biochemical engineering strategies devoted towards novel ways for PGA production and application. This work presents a fermentation process for the heterologous production of PGA from Alcaligenes faecalis in Bacillus megaterium with optimization. The thermal stability from A. faecalis PGA is considerably higher than other described PGA and the recombinant enzyme is secreted to the culture medium by B. megaterium, which facilitates the separation and purification steps. Media optimization using fractional factorial design experiments was used to identify factors related to PGA activity detection in supernatant and cell lysates. The optimized medium resulted in almost 6-fold increased activity in the supernatant samples when compared with the basal medium. Maximum enzyme activity in optimized medium composition achieves values between 135 and 140 IU/ml. The results suggest a promising model for recombinant production of PGA in B. megaterium with possible extracellular expression of the active enzyme.

Comparative study of poly tannic acid functionalized magnetic particles before and after modification for immobilized penicillin G acylase

In this work, Fe₃O₄ nanoparticles (NPs) was synthesized by inverting microemulsion method. After that, based on the physical and chemical properties of tannic acid (TA), poly tannic acid (PTA) was coated on Fe₃O₄ NPs surface. Fe₃O₄ NPs coated with PTA, on the one hand, was used to immobilize Penicillin G acylase (PGA) by physical adsorption. On the other hand, it was modified by glutaraldehyde (GA). GA grafting rate (G_r-GA) was optimized, and the G_r-GA was 30.0% under the optimum conditions. Then, through the Schiff base reaction between the glutaraldehyde group and PGA amino group, this covalent immobilization of PGA was further realized under mild conditions. Finally, the structures of every stage of magnetic composites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibration magnetometer (VSM) and transmission electron microscopy (TEM), respectively. The results indicated that the enzyme activity (EA), enzyme activity recovery (EAR) and maximum load (ELC) of the immobilized PGA were 26843 U/g, 80.2% and 125 mg/g, respectively. Compared to the physical immobilization of PGA by only coating PTA nanoparticles, further modified nanoparticles by GA showed higher catalytic stability, reusability and storage stability.

Immobilized penicillin G acylase with enhanced activity and stability using glutaraldehyde-modified polydopamine-coated Fe3 O4 nanoparticles

In this work, Fe₃ O₄ nanoparticles (NPs) were coated with polydopamine (PDA) to structure Fe₃ O₄ @PDA NPs by the spontaneous oxygen-mediated self-polymerization of dopamine (DA) in an aqueous solution of pH = 8.5. The fabricated Fe₃ O₄ @PDA NPs were grafted by glutaraldehyde to realize the immobilization of penicillin G acylase (PGA) under mild conditions. The carriers of each stage were characterized and investigated by transmission electron microscopy, X-ray diffraction, Fourier transform infrared, and vibrating sample magnetometry. To improve the catalytic activity and stability of immobilized PGA, the immobilization conditions were investigated and optimized. Under the optimal immobilization conditions, the enzyme loading capacity, enzyme activity, and enzyme activity recovery of immobilized PGA were 114 mg/g, 26,308 U/g, and 78.5%, respectively. In addition, the immobilized PGA presented better temperature and pH stability compared with free PGA. The reusability study ensured that the immobilized PGA showed an excellent repeating application performance. In particular, the recovery rate of immobilized PGA could reach 94.8% and immobilized PGA could retain 73.0% of its original activity after 12 cycles, indicating that the immobilized PGA exhibited a high operation stability and broad application potential in the biocatalysis field.

Thermoresponsive Poly(N,N-diethylacrylamide-co-glycidyl methacrylate) Copolymers and Its Catalytically Active α-Chymotrypsin Bioconjugate with Enhanced Enzyme Stability

Responsive (smart, intelligent, adaptive) polymers have been widely explored for a variety of advanced applications in recent years. The thermoresponsive poly(N,N-diethylacrylamide) (PDEAAm), which has a better biocompatibility than the widely investigated poly(N,N-isopropylacrylamide), has gained increased interest in recent years. In this paper, the successful synthesis, characterization, and bioconjugation of a novel thermoresponsive copolymer, poly(N,N-diethylacrylamide-co-glycidyl methacrylate) (P(DEAAm-co-GMA)), obtained by free radical copolymerization with various comonomer contents and monomer/initiator ratios are reported. It was found that all the investigated copolymers possess LCST-type thermoresponsive behavior with small extent of hysteresis, and the critical solution temperatures (CST), i.e., the cloud and clearing points, decrease linearly with increasing GMA content of these copolymers. The P(DEAAm-co-GMA) copolymer with pendant epoxy groups was found to conjugate efficiently with α-chymotrypsin in a direct, one-step reaction, leading to enzyme-polymer nanoparticle (EPNP) with average size of 56.9 nm. This EPNP also shows reversible thermoresponsive behavior with somewhat higher critical solution temperature than that of the unreacted P(DEAAm-co-GMA). Although the catalytic activity of the enzyme-polymer nanoconjugate is lower than that of the native enzyme, the results of the enzyme activity investigations prove that the pH and thermal stability of the enzyme is significantly enhanced by conjugation the with P(DEAAm-co-GMA) copolymer.

Optimization of penicillin G acylase immobilized on glutaraldehyde-modified titanium dioxide

In this work, TiO₂ , which was modified by glutaraldehyde, was adopted as the carrier; the penicillin G acylase (PGA) was immobilized and the influence of immobilized conditions, such as pH of solution, the concentration of PGA, the immobilization temperature, and the reaction time, on the catalytic performance of the immobilized PGA was investigated and optimized. During this process, potassium penicillin G (PG) was chosen as substrate, and the quantity of 6-aminopenicillanic acid (6-APA) produced by PG at the temperature of 25 °C for 3 Min in neutral solution was conscripted as the evaluation foundation, indexes, containing the loading capacity (ELC), the activity (EA), and activity retention rate (EAR), were calculated based on quantities of produced 6-APA and compared with finding out the suitable conditions. Results showed that when the solution pH, PGA concentration, immobilization temperature, and reaction time were 8.0, 2.5% (v/v), 35 °C, and 24 H, respectively, ELC, EA, and EAR presented optimal values of 9,190 U, 14,969 U/g, and 88.5% relatedly. After that, the stability and reusability of immobilized PGA were studied, and the results documented that the pH resistance, thermal stability, and storage stability of immobilized PGA were significantly improved. This work provided technique support for the practical application of immobilized PGA carrier.