Structural, morphological, optical and dielectric properties of M3+ /PVA/PEG SPE Films (M = La, Y, Fe or Ir)

Tuning the band gap, optical, mechanical, and electrical features of a bio-blend by Cr2O3/V2O5 nanofillers for optoelectronics and energy applications

This work presents a facile approach for controlling the optical and electrical parameters of a biopolymeric matrix for optoelectronics. Vanadium oxide (V2O5) and chromium oxide (Cr2O3) nanoparticles (NPs) were prepared and incorporated into the carboxymethylcellulose/polyethylene glycol (CMC/PEG) blend by simple chemical techniques. Transmission electron microscopy (HR-TEM), and X-ray diffraction (XRD) data showed that V2O5 and Cr2O3 exhibited spherical shapes with sizes in the range of 40-50 nm and 10-20 nm, respectively. In addition, the blend's degree of crystallinity was sensitive to the V2O5 and Cr2O3 doping ratios. The scanning electron microscopy (FE-SEM) and the elemental chemical analysis (EDAX) used to study the filler distribution inside the blend, and confirmed the existence of both V and Cr in the matrix. Fourier transform infrared (FTIR) spectroscopy showed that the dopants significantly affected the blend reactive (C-O-C, OH, and C=O) groups. The stress-strain curves illustrated the reinforcing effect of the dopants up to 1.0 wt\% Cr2O3/V. The transmittance and absorption index spectra in the visible-IR wavelengths decreased with increasing filler content. Utilizing Tauc's relation and (optical) dielectric loss, the direct (indirect) band gap narrowed from 5.6 (4.5) eV to 4.7 (3.05) eV at 1.0   wt\% Cr2O3/V. All films have an index of refraction in the range of 1.93-2.17. AC conductivity was improved with increasing filler content and temperature. The energy density at 50 °C is in the range of 1-3 J/m3. The influence of V2O5 and Cr2O3 content on the optical conductivity, dielectric constant, loss, and dielectric modulus of CMC/PEG was reported. These enhancements in electrical and optical properties, along with the potential for band gap engineering, offer promising prospects for advanced applications in optoelectronics and energy-related fields.

The Effect of Doping on the Electrical and Dielectric Properties of Hydroxyapatite for Medical Applications: From Powders to Thin Films

Recently, the favorable electrical properties of biomaterials have been acknowledged as crucial for various medical applications, including both bone healing and growth processes. This review will specifically concentrate on calcium phosphate (CaP)-based bioceramics, with a notable emphasis on hydroxyapatite (HA), among the diverse range of synthetic biomaterials. HA is currently the subject of extensive research in the medical field, particularly in dentistry and orthopedics. The existing literature encompasses numerous studies exploring the physical-chemical, mechanical, and biological properties of HA-based materials produced in various forms (i.e., powders, pellets, and/or thin films) using various physical and chemical vapor deposition techniques. In comparison, there is a relative scarcity of research on the electrical and dielectric properties of HA, which have been demonstrated to be essential for understanding dipole polarization and surface charge. It is noteworthy that these electrical and dielectric properties also offer valuable insights into the structure and functioning of biological tissues and cells. In this respect, electrical impedance studies on living tissues have been performed to assess the condition of cell membranes and estimate cell shape and size. The need to fill the gap and correlate the physical-chemical, mechanical, and biological characteristics with the electrical and dielectric properties could represent a step forward in providing new avenues for the development of the next-generation of high-performance HA-doped biomaterials for future top medical applications. Therefore, this review focuses on the electrical and dielectric properties of HA-based biomaterials, covering a range from powders and pellets to thin films, with a particular emphasis on the impact of the various dopants used. Therefore, it will be revealed that each dopant possesses unique properties capable of enhancing the overall characteristics of the produced structures. Considering that the electrical and dielectric properties of HA-based biomaterials have not been extensively explored thus far, the aim of this review is to compile and thoroughly discuss the latest research findings in the field, with special attention given to biomedical applications.

Enhancement of physico-chemical, optical, dielectric and antimicrobial properties of polyvinyl alcohol/carboxymethyl cellulose blend films by addition of silver doped hydroxyapatite nanoparticles

Hydroxyapatite nanoparticles doped with silver AgHA-NPs were synthesized successfully then added with various mass fractions to a mixed solution of polyvinyl alcohol (PVA)/ carboxymethyl cellulose (CMC) using the casting technique. Experimentally, the influence of silver doped hydroxyapatite nanoparticles on the structural, optical, dielectric and antimicrobial properties of nanocomposite films was investigated. X-ray diffraction and Fourier transformation infrared spectroscopy were used to explore the structural features of these films. The XRD analysis revealed the amorphous nature of PVA/CMC blend and the intensity of the characteristic peak of the virgin polymers in the nanocomposite spectrum being much reduced as the doping level was increased. The FT-IR spectra indicated that the blend components were miscible by revealing the functional groups of two polymers that interacted through the formation of a hydrogen bond while, the FT-IR spectra of nanocomposite confirmed the good interaction between the blend chains and AgHA-NPs. The morphological graphs of the prepared blend were formed as hexagonal grains with size distribution around 18.36–24.11 μm. The addition of AgHA-NPs changed the surface morphology of the blend significantly. The optical properties of PVA/ CMC blend and nanocomposites films were measured in the 200–800 nm wavelength range. Optical measurements showed that the optical transmittance for pure blend was nearly 90% while it decreased to 50% with increasing AgHA-NPs contents up to 40 wt.%. The energy gap values calculated by Tauc's model and those determined by ASF model are consistent, where their values reduced by AgHA-NPs incorporation. The dielectric constant of all samples were studied in range of temperatures (303–405 K) and from100 kHz to 1.0 MHz, range of frequencies. The Correlated Barrier Hopping (CBH) is the most appropriate conduction mechanism based on the frequency dependence of the ac conductivity. Silver ion release was examined showed that he film loaded with 10 wt.% AgHA-NPs has a small release of silver ion, while the amount of the Ag+ released from the samples increased slowly with increasing the content of AgHA-NPs. PVA/CMC/AgHA films were tested for antibacterial activity against both (Bacillus subtilis) and (Escherichia coli) as well as the anti-fungal activity against (Candida albicans),their results showing an increase in the activity index as the filling level of AgHA-NPs increases. The study confirmed that doping of AgHA-NPs into PVA/CMC improves both electrical conductivity and antimicrobial efficiency and these nanocomposites might be recommended for further work in biomedical applications such as wound dressing and infection control.