Effect of engineered PLGA‐gelatin‐chitosan/ PLGA‐gelatin / PLGA‐gelatin‐graphene three‐layer scaffold on adhesion/proliferation of HUVECs

Multi-material electrospinning: from methods to biomedical applications

Electrospinning as a versatile, simple, and cost-effective method to engineer a variety of micro or nanofibrous materials, has contributed to significant developments in the biomedical field. However, the traditional electrospinning of single material only can produce homogeneous fibrous assemblies with limited functional properties, which oftentimes fails to meet the ever-increasing requirements of biomedical applications. Thus, multi-material electrospinning referring to engineering two or more kinds of materials, has been recently developed to enable the fabrication of diversified complex fibrous structures with advanced performance for greatly promoting biomedical development. This review firstly gives an overview of multi-material electrospinning modalities, with a highlight on their features and accessibility for constructing different complex fibrous structures. A perspective of how multi-material electrospinning opens up new opportunities for specific biomedical applications, i.e., tissue engineering and drug delivery, is also offered.

Transdermal drug delivery system of lidocaine hydrochloride based on dissolving gelatin/sodium carboxymethylcellulose microneedles

In this study, it was aimed to introduce a transdermal drug delivery system with dissolving microneedles (DMNs) based on gelatin (GEL) and sodium carboxymethyl cellulose (NaCMC) for lidocaine hydrochloride (LidoHCl) delivery. Different ratios of GEL and NaCMC were mixed, loaded with an active agent of LidoHCl, and treated with glutaraldehyde (GTA) as a crosslinker agent. Prepared hydrogels were cast into a silicon mold. Hereby, microneedles (MNs) with 500 µm height, 35° needle angle, 40-µm tip radius, and 960-µm tip-to-tip distance were fabricated. Samples containing LidoHCl 40%, GEL/NaCMC 5:1 (wt/wt), and polymer/GTA ratio 3.1 (wt/wt) showed the highest drug release ability (t < 10 min) with proper mechanical properties in comparison with other samples. Due to the drug release in a short time (fewer than 10 min), this drug delivery system can be used for rapid local anesthesia for pain relief as well as before minor skin surgeries.

Graphical Abstract

Additive Manufacturing of Bioceramic Implants for Restoration Bone Engineering: Technologies, Advances, and Future Perspectives

Treating bone defects is highly challenging because they do not heal on their own inside the patients, so implants are needed to assist in the reconstruction of the bone. Bioceramic implants based on additive manufacturing (AM) are currently emerging as promising treatment options for restoration bone engineering. On the one hand, additively manufactured bioceramic implants have excellent mechanical properties and biocompatibility, which are suitable for bone regeneration. On the other hand, the designable structure and adjustable pores of additively manufactured bioceramic implants allow them to promote suitable cell growth and tissue climbing. Herein, this review unfolds to introduce several frequently employed AM technologies for bioceramic implants. After that, advances in commonly used additively manufactured bioceramic implants, including bioinert ceramic implants, bioactive ceramic implants, and bioceramic/organic composite implants, are categorized and summarized. Finally, the future perspectives of additively manufactured bioceramic implants, in terms of mechanical performance improvement, innovative structural design, biological property enhancement, and other functionalization approaches, are proposed and forecasted. This review is believed to provide some fundamental understanding and cutting-edge knowledge for the additive manufacturing of bioceramic implants for restoration bone engineering.

Engineering Nanofiber Scaffolds with Biomimetic Cues for Differentiation of Skin-Derived Neural Crest-like Stem Cells to Schwann Cells

Our laboratory reported the derivation of neural crest stem cell (NCSC)-like cells from the interfollicular epidermis of the neonatal and adult epidermis. These keratinocyte (KC)-derived Neural Crest (NC)-like cells (KC-NC) could differentiate into functional neurons, Schwann cells (SC), melanocytes, and smooth muscle cells in vitro. Most notably, KC-NC migrated along stereotypical pathways and gave rise to multiple NC derivatives upon transplantation into chicken embryos, corroborating their NC phenotype. Here, we present an innovative design concept for developing anisotropically aligned scaffolds with chemically immobilized biological cues to promote differentiation of the KC-NC towards the SC. Specifically, we designed electrospun nanofibers and examined the effect of bioactive cues in guiding KC-NC differentiation into SC. KC-NC attached to nanofibers and adopted a spindle-like morphology, similar to the native extracellular matrix (ECM) microarchitecture of the peripheral nerves. Immobilization of biological cues, especially Neuregulin1 (NRG1) promoted the differentiation of KC-NC into the SC lineage. This study suggests that poly-ε-caprolactone (PCL) nanofibers decorated with topographical and cell-instructive cues may be a potential platform for enhancing KC-NC differentiation toward SC.

PBAT/gelatin hybrid nanofibers based on post-double network bond processing as a promising vascular substitute

The development of injured vascular tissue substitutes with proangiogenic, anti-thrombus, and anti-hyperplasia activity still remains a major challenge in vascular tissue engineering. In this study, we have prepared a series of poly(butylene adipate-co-terephthalate)/gelatin hybrid nanofibers (P/G) through random electrospinning and post-double network bond crosslinking for process optimization according to physiochemical and mechanical properties as well as promoting enhanced vascular cell viability in vitro. The gelatin matrix was shown to be successfully contained in the bicomponent hybrid P/G nanofibers, and the formed P/G nanofibers exhibited a uniform and smooth morphology. Importantly, the bicomponent hybrid nanofibers showed a potentially reliable ability to promote the proliferation of human umbilical vein endothelial cells (HUVECs). In addition, all the results demonstrated the significantly stable microstructure, appropriate surface wettability, matched mechanical properties, and excellent blood compatibility, cellular compatibility, and histocompatibility of hybrid nanofibers containing 15 wt% gelation (P/G-15) compared to PG-0, P/G-5, and PG-25 groups, indicating their potential for vascular injury healing.

A PBAT/gelatin hybrid nanofibers vascular graft containing 15 wt% gelation (P/G-15) exhibited matched mechanical properties, especially they demonstrate excellent blood compatibility, cellular compatibility, and histocompatibility in rabbit carotid artery model.