Direct generation of electrospun branched nanofibers for energy harvesting

Superelastic Polyimide Nanofiber-Based Aerogels Modified with Silicone Nanofilaments for Ultrafast Oil/Water Separation

Nanofiber membranes via electrospinning with layered structures are frequently used for oil/water separation, thanks to their unique properties. However, challenges that involve nanofibrous membranes still remain, such as high energy consumption and unfavorable transport properties because of the densely compact structure. In this study, superelastic and robust nanofiber-based aerogels (NFAs) with a three-dimensional (3D) structure as well as tunable porosity were prepared using polyimide (PI) nanofibers via a freeze-drying process followed by the solvent-vapor treatment. The porous NFAs were further modified using trichloromethylsilane (TCMS) to generate silicone nanofilaments (SiNFs) on the surface of the PI nanofibers, which could enhance the hydrophobicity (water contact angle 151.7°) of the NFAs. The corresponding superhydrophobic NFAs exhibited ultralow density (<10.0 mg m^-3), high porosity (>99.0%), and rapid recovery under 80% compression strain. SiNFs-coated NFAs (SiNFs/NFAs) could also collect a wide range of oily solvents with high absorption capacities up to 159 times to their own weight. Moreover, surfactant-stabilized water-in-oil emulsions could also be efficiently separated (up to 100%) under the driving force of gravity, making it a promising energy-efficient technology. Additionally, SiNFs/NFAs maintained high separation efficiency throughout five separation-recovery cycles, indicating the potential of SiNFs/NFAs in the field of oil/water separation, sewage treatment, as well as oily fume purification.

Cationic surfactant assisted enhancement of dielectric and piezoelectric properties of PVDF nanofibers for energy harvesting application

Poly(vinylidene fluoride) (PVDF) is among the most versatile polymers due to its wide range of properties, including dielectric, piezoelectric and ferroelectric properties. However, more frequently than not a range of processing routes and/or additives have been used to enhance such properties. In this study, PVDF nanofibers were electrospun from PVDF solution that contained tetra-n-butyl ammonium chloride (TBAC) at different loadings (1, 2, 3, and 5 wt%). The effect of TBAC on the morphology, crystallinity, and polymorphism of PVDF was studied using various characterization techniques. Addition of TBAC significantly improved the electroactive β-phase of PVDF. The highest β-phase content of 89% was attained at a TBAC loading of 3 wt%. Consequently, the dielectric and piezoelectric properties of the PVDF nanofibers improved significantly. A nanogenerator fabricated using 3 wt% TBAC/PVDF nanofibers exhibited the maximum voltage output of 17.2 V (under 5 N force) and the maximum power density of ∼1.4 μW cm-2 (under 3 N force). Improved dielectric and piezoelectric properties of PVDF upon the addition of a small amount of TBAC could be useful for researchers in upbringing the material for flexible electronic devices.

Electrospun PVDF Nanofibers for Piezoelectric Applications: A Review of the Influence of Electrospinning Parameters on the β Phase and Crystallinity Enhancement

Polyvinylidene fluoride (PVDF) is among the most attractive piezo-polymers due to its excellent piezoelectricity, lightweight, flexibility, high thermal stability, and chemical resistance. PVDF can exist under different forms of films, membranes, and (nano)fibers, and its piezoelectric property related to its β phase content makes it interesting for energy harvesters and wearable applications. Research investigation shows that PVDF in the form of nanofibers prepared by electrospinning has more flexibility and better air permeability, which make them more suitable for these types of applications. Electrospinning is an efficient technique that produces PVDF nanofibers with a high β phase fraction and crystallinity by aligning molecular dipoles (-CH2 and -CF2) along an applied voltage direction. Different nanofibers production techniques and more precisely the electrospinning method for producing PVDF nanofibers with optimal electrospinning parameters are the key focuses of this paper. This review article highlights recent studies to summarize the influence of electrospinning parameters such as process (voltage, distance, flow rate, and collector), solution (Mw, concentration, and solvent), and ambient (humidity and temperature) parameters to enhance the piezoelectric properties of PVDF nanofibers. In addition, recent development regarding the effect of adding nanoparticles in the structure of nanofibers on the improvement of the β phase is reviewed. Finally, different methods of measuring piezoelectric properties of PVDF nanofibrous membrane are discussed.