Ti3C2Tx-UHMWPE Nanocomposites-Towards an Enhanced Wear-Resistance of Biomedical Implants

There is an urgent need to enhance the mechanical and biotribological performance of polymeric materials utilized in biomedical devices such as load-bearing artificial joints, notably ultrahigh molecular weight polyethylene (UHMWPE). While two-dimensional (2D) materials like graphene, graphene oxide (GO), reduced GO, or hexagonal boron nitride (h-BN) have shown promise as reinforcement phases in polymer matrix composites (PMCs), the potential of MXenes, known for their chemical inertness, mechanical robustness, and wear-resistance, remains largely unexplored in biotribology. This study aims to address this gap by fabricating Ti3C2Tx-UHMWPE nanocomposites using compression molding. Primary objectives include enhancements in mechanical properties, biocompatibility, and biotribological performance, particularly in terms of friction and wear resistance in cobalt chromium alloy pin-on-UHMWPE disk experiments lubricated by artificial synovial fluid. Thereby, no substantial changes in the indentation hardness or the elastic modulus are observed, while the analysis of the resulting wettability and surface tension as well as indirect and direct in vitro evaluation do not point towards cytotoxicity. Most importantly, Ti3C2Tx-reinforced PMCs substantially reduce friction and wear by up to 19% and 44%, respectively, which was attributed to the formation of an easy-to-shear transfer film.

Enhancing Wear Resistance of UHMWPE Composites with Micro MoS2 and Nano Graphite: A Taguchi-DOE Approach

This study presents an in-depth investigation into the wear characteristics of ultrahigh-molecular-weight polyethylene (UHMWPE) composites reinforced with microsized MoS2 and nanosized graphite particles. The objective is to enhance the wear resistance of the UHMWPE by examining the effects of various parameters and optimizing the wear performance. To achieve this goal, wet wear tests were conducted under controlled conditions, and the results were compared between composites with micro MoS2 and nano graphite reinforcements. The Taguchi method was employed to design the experiments (DOE) using an L9 orthogonal array. Four key parameters, namely, reinforcement percentage, load, speed, and track radius, were varied systematically to analyze their impact on wear characteristics, including wear rate, frictional forces, and the coefficient of friction (COF). The data obtained from the experiments were subjected to analysis of variance (ANOVA) to identify the significant factors affecting wear behavior. Subsequently, the optimal wear parameters were determined through regression analysis, allowing for the prediction of wear characteristics under the optimum conditions. This research not only provides insights into the comparative performance of micro MoS2 and nano graphite reinforcements in UHMWPE composites but also offers a comprehensive approach to optimizing wear resistance by employing advanced statistical and experimental techniques. The findings contribute to the development of more durable and wear-resistant materials with potential applications in various industries, such as those investigated in the study, which are commonly employed, such as automotive, aerospace, medical devices, or manufacturing.