Fire performance of piperazine phytate modified rigid polyurethane foam composites

Surface Flame-Retardant Systems of Rigid Polyurethane Foams: An Overview

Rigid polyurethane foam (RPUF) is one of the best thermal insulation materials available, but its flammability makes it a potential fire hazard. Due to its porous nature, the large specific surface area is the key factor for easy ignition and rapid fires spread when exposed to heat sources. The burning process of RPUF mainly takes place on the surface. Therefore, if a flame-retardant coating can be formed on the surface of RPUF, it can effectively reduce or stop the flame propagation on the surface of RPUF, further improving the fire safety. Compared with the bulk flame retardant of RPUF, the flame-retardant coating on its surface has a higher efficiency in improving fire safety. This paper aims to review the preparations, properties, and working mechanisms of RPUF surface flame-retardant systems. Flame-retardant coatings are divided into non-intumescent flame-retardant coatings (NIFRCs) and intumescent flame-retardant coatings (IFRCs), depending on whether the flame-retardant coating expands when heated. After discussion, the development trends for surface flame-retardant systems are considered to be high-performance, biological, biomimetic, multifunctional flame-retardant coatings.

On-Line Thermally Induced Evolved Gas Analysis: An Update-Part 2: EGA-FTIR

The on-line thermally induced evolved gas analysis (OLTI-EGA) is widely applied in many different fields. Aimed to update the applications, our group has systematically collected and published examples of EGA characterizations. Following the recently published review on EGA-MS applications, this second part reviews the latest applications of Evolved Gas Analysis performed by on-line coupling heating devices to infrared spectrometers (EGA-FTIR). The selected 2019, 2020, 2021 and early 2022 references are collected and briefly described in this review; these are useful to help researchers to easily find applications that are sometimes difficult to locate.

Flame-Retarded Rigid Polyurethane Foam Composites with the Incorporation of Steel Slag/Dimelamine Pyrophosphate System: A New Strategy for Utilizing Metallurgical Solid Waste

Rigid polyurethane (RPUF) was widely used in external wall insulation materials due to its good thermal insulation performance. In this study, a series of RPUF and RPUF-R composites were prepared using steel slag (SS) and dimelamine pyrophosphate (DMPY) as flame retardants. The RPUF composites were characterized by thermogravimetric (TG), limiting oxygen index (LOI), cone calorimetry (CCT), and thermogravimetric infrared coupling (TG-FTIR). The results showed that the LOI of the RPUF-R composites with DMPY/SS loading all reached the combustible material level (22.0 vol%~27.0 vol%) and passed UL-94 V0. RPUF-3 with DMPY/SS system loading exhibited the lowest pHRR and THR values of 134.9 kW/m² and 16.16 MJ/m², which were 54.5% and 42.7% lower than those of unmodified RPUF, respectively. Additionally, PO· and PO₂· free radicals produced by pyrolysis of DMPY could capture high energy free radicals, such as H·, O·, and OH·, produced by degradation of RPUF matrix, effectively blocking the free radical chain reaction of composite materials. The metal oxides in SS reacted with the polymetaphosphoric acid produced by the pyrolysis of DMPY in combustion. It covered the surface of the carbon layer, significantly insulating heat and mass transport in the combustion area, endowing RPUF composites with excellent fire performance. This work not only provides a novel strategy for the fabrication of high-performance RPUF composites, but also elucidates a method of utilizing metallurgical solid waste.