Protecting polymers in suspension of metal nanoparticles

One-Pot Synthesis of Pd Nanoparticles Supported on Carbide-Derived Carbon for Oxygen Reduction Reaction

We explored two methods for synthesizing Pd nanoparticles using three different carbide-derived carbon (CDC) support materials, one of which was nitrogen-doped. These materials were studied for oxygen reduction reaction (ORR) in 0.1 M KOH solution, and the resulting CDC/Pd catalysts were characterized using TEM, XRD, and XPS. The citrate method and the polyol method using polyvinylpyrrolidone (PVP) as a capping agent were employed to elucidate the impact of the support material on the final catalyst. The N-doping of the CDC material resulted in smaller Pd nanoparticles, but only in the case of the citrate method. This suggests that the influence of support is weaker when using the polyol method. The citrate method with CDC1, which is predominantly microporous, led to a higher degree of agglomeration and formation of larger particles in comparison to supports, which possessed a higher degree of mesoporosity. We achieved smaller Pd particle sizes using citrate and NaBH4 compared to the ethylene glycol PVP method. Pd deposited on CDC2 and CDC3 supports showed similar specific activity (SA), suggesting that the N-doping did not significantly influence the ORR process. The highest SA value was observed for CDC1/Pd_Cit, which could be attributed to the formation of larger Pd particles and agglomerates.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

Layer-by-layer films of polysaccharides modified with poly(N-vinylpyrrolidone) and poly(vinyl alcohol)

N-grafted copolymers of chitosan (460 kDa) with poly(N-vinylpyrrolidone) (2.4 kDa) or poly(vinyl alcohol) (2.0 ​kDa) as side chains were synthesized. Depending on the polymer-to-chitosan mass ratio the degree of amino group substitution with side chains in chitosan backbone was varied in the range of 0.01-0.33. Layer-by-layer films consisted of copolymers and dextran sulfate as polyanion were obtained. Thickness, hydrophilicity, and morphology of the films were investigated using QCM, UV-vis spectrophotometry, AFM, and contact angle measurements. The obtained films show enhanced protein-repellent properties in fetal bovine serum medium. The mass of adsorbed proteins on LbL films based on copolymer with a degree of substitution of 0.2 decreases by 50 ​% compared to unmodified chitosan. Protein-repellent properties of copolymer-based films are common for LbL films of grafted chitosan copolymers and depend on hydrophilic side chain density on the surface.

Assessment of strategies for the formation of stable suspensions of titanium dioxide nanoparticles in aqueous media suitable for the analysis of biological fluids

Due to their omnipresence in consumer products, there is a growing concern about the potential effects of nanoparticles on human health. Toxicological assessment and NP end-product studies require proper quantification of these materials in biological fluids. However, their quantifications in these media require stable predispersed NP solutions in aqueous media to enable the fortification in the matrices of interest or the preparation of calibration standards. In this study, a sample preparation scheme was developed by studying various dispersion media (polyvinylpyrrolidone and polyethylene glycol) and sonication strategies (bath and ultrasonic probe) to ensure homogeneous dispersion of titanium dioxide nanoparticles. Optimization of the various parameters was performed using SRM NIST 1898 NP reference material, composed of rutile and anatase phases. Number-based size distribution for titanium dioxide NPs was determined by dynamic light scattering and single-particle inductively coupled plasma mass spectrometry to evaluate the procedure efficiency. Changes in mean size and most frequent size distribution were also studied to determine if the agglomeration of nanoparticles occurs at the various dispersion conditions tested. Among the different dispersion parameters tested herein, the use of polyvinylpyrrolidone combined with a sonication process generated by a probe leads to a significant improvement in terms of suspension efficiency and stability over 72 h. The dispersion efficiency of the proposed methodology was assessed by single-particle inductively coupled plasma mass spectrometry with spiked biological fluids such as urine and blood. Graphical abstract.

Preparation and Characterization of Polyvinylpyrrolidone/Cellulose Nanocrystals Composites

Composite films and aerogels of polyvinylpyrrolidone/cellulose nanocrystals (PVP/CNC) were prepared by solution casting and freeze-drying, respectively. Investigations into the PVP/CNC composite films and aerogels over a wide composition range were conducted. Thermal stability, morphology, and the resulting reinforcing effect on the PVP matrix were explored. FTIR, TGA, DSC, X-ray diffraction, SEM, and tensile testing were used to examine the properties of the composites. It was revealed PVP-assisted CNC self-assembly that produces uniform CNC aggregates with a high aspect ratio (length/width). A possible model of the PVP-assisted CNC self-assembly has been considered. Dispersibility of the composite aerogels in water and some organic solvents was studied. It was shown that dispersing the composite aerogels in water resulted in stable colloidal suspensions. CNC particles size in the redispersed aqueous suspensions was near similar to the CNC particles size in never-dried CNC aqueous suspensions.

Kinetics of Spontaneous Bimetallization between Silver and Noble Metal Nanoparticles

A physical mixture of polymer-protected Ag nanoparticles and Rh, Pd, or Pt nanoparticles spontaneously forms Ag-core bimetallic nanoparticles. The formed nanoparticles were smaller than the parent Ag nanoparticles. In the initial process of this reaction, the surface plasmon absorption of Ag nanoparticles diminished and then almost ceased within one hour. Within several minutes, the decrease in Ag surface plasmon absorption could be analyzed by second-order reaction. This reaction was accelerated with an increase of temperature and the energy gap in the Fermi level between Ag and the other metals. The activation energy (Ea ) of this reaction could be determined. An electron transfer reaction from Ag to other metal nanoparticles was proposed as the initial interaction between these metal nanoparticles because the Fermi level of Ag is relatively high, and the electron transfer is possible in terms of energy. The Marcus plot between the rate constant and the driving force, roughly estimated from the work function of metals, and the observed Ea values reasonably explained the proposed electron transfer mechanism.

Advances in the preparation of highly selective nanocatalysts for the semi-hydrogenation of alkynes using colloidal approaches

The present review describes the contributions and perspectives in the field of the selective hydrogenation of alkynes involving the utilization of colloidal methodologies.

Evolution of the PVP-Pd Surface Interaction in Nanoparticles through the Case Study of Formic Acid Decomposition

Palladium nanoparticles (Pd NPs) were synthesized by the reduction-by-solvent method using polyvinylpirrolidone (PVP) as capping agent. The nonstatic interaction between PVP and the metallic surface may change the properties of the NPs due to the different possible interactions, through either the O or N atoms of the PVP. In order to analyze these effects and their repercussions in their catalytic performance, Pd NPs with various PVP/Pd molar ratios (1, 10, and 20) were prepared, deposited on silica, and tested in the formic acid decomposition reaction. The catalytic tests were conducted using catalysts prepared by loading NPs with three different time lapses between their purification and their deposition on the silica support (1 day, 1 month, and 6 months). CO adsorption, FTIR spectroscopy, XPS, and TEM characterization were used to determine the accessibility of the Pd NPs surface sites, the electronic state of Pd, and the average NPs size, respectively. The H₂ production from the formic acid decomposition reaction has a strong dependence on the Pd surface features, which in turn are related to the NPs aging time due to the progressive removal of the PVP.

Facile preparation of an immobilized surfactant-free palladium nanocatalyst for metal hydride trapping: a novel sensing platform for TXRF analysis

In this work, a simple route for the synthesis of surfactant-free immobilized palladium nanoparticles (Pd NPs) and their use as effective nanocatalysts for metal hydride decomposition is described. A mixture of ethanol : water was used as the reducing agent. Ethanol was added in a large excess to reduce the ionic Pd and stabilize the obtained Pd NPs. Ethanol is adsorbed on the surface of Pd allowing steric stabilization. Freshly prepared Pd NPs were immobilized onto quartz substrates modified with 3-mercaptopropyltrimethoxysilane. Pd interacts with the thiol group of the alkoxysilane that is adsorbed on the surface of NPs without the dissociation of the S-H bond. Different parameters affecting the synthesis of Pd NPs and their immobilization onto quartz substrates were evaluated. A comprehensive characterization of the synthesized Pd NPs was carried out by transmission electron microscopy (TEM), whereas total reflection X-ray fluorescence (TXRF) spectrometry was applied in order to evaluate their catalytic activity for solid-gas reactions. Immobilized Pd NPs were applied as nanocatalysts for the dissociative chemisorption of arsine at room temperature, yielding the formation of As-Pd bonds. Quartz substrates coated with nanosized Pd could be used as novel sensing platforms for total reflection X-ray fluorescence analysis. Arsenic can be detected in situ in natural water with a limit of detection of 0.08 μg L(-1).

Differential SERS activity of gold and silver nanostructures enabled by adsorbed poly(vinylpyrrolidone)

We report that poly(vinylpyrrolidone) (PVP), a common stabilizer of colloidal dispersions of noble metal nanostructures, has a dramatic effect on their surface-enhanced Raman scattering (SERS) activity and enables highly selective SERS detection of analytes of various type and charge. Nanostructures studied include PVP-stabilized Au-Ag nanoshells synthesized by galvanic exchange reaction of citrate-reduced Ag nanoparticles (NPs), as well as solid citrate-reduced Ag and Au NPs, both before and after stabilization with PVP. All nanostructures were characterized in terms of their size, surface plasmon resonance wavelength, surface charge, and chemical composition. While the SERS activities of the parent citrate-reduced Ag and Au NPs are similar for rhodamine 6G (R6G) and 1,2-bis(4-pyridyl)ethylene (BPE) at various pH values, PVP-stabilized nanostructures demonstrate large differences in SERS enhancement factors (EFs) between these analytes depending on their chemical nature and protonation state. At pH values higher than BPE's pK(a2) of 5.65, where the analyte is largely unprotonated, the PVP-coated Au-Ag nanoshells showed a high SERS EF of >10(8). In contrast, SERS EFs were 10(3)- to 10(5)-fold lower for the protonated form of BPE at lower pH values, or for the usually highly SERS-active cationic R6G. The differential SERS activity of PVP-stabilized nanostructures is a result of discriminatory binding of analytes within-adsorbed PVP monolayer and a subsequent increase of analyte concentration at the nanostructure surface. Our experimental and theoretical quantum chemical calculations show that BPE binding with PVP-stabilized Au-Ag nanoshells is stronger when the analyte is in its unprotonated form as compared to its cationic, protonated form at a lower pH.