On the measurement of fracture toughness of soft biogel

Cavitation nucleation and its ductile-to-brittle shape transition in soft gels under translational mechanical impact

Cavitation bubbles in the human body, when subjected to impact, are being increasingly considered as a possible brain injury mechanism. However, the onset of cavitation and its complex dynamics in biological materials remain unclear. Our experimental results using soft gels as a tissue simulant show that the critical acceleration (a_cr) at cavitation nucleation monotonically increases with increasing stiffness of gelatin A/B, while a_cr for agarose and agar initially increases but is followed by a plateau or even decrease after stiffness reach to ∼100 kPa. Our image analyses of cavitation bubbles and theoretical work reveal that the observed trends in a_cr are directly linked to how bubbles grow in each gel. Gelatin A/B, regardless of their stiffness, form a localized damaged zone (tens of nanometers) at the gel-bubble interface during bubble growth. In contrary, the damaged zone in agar/agarose becomes significantly larger (> 100 times) with increasing shear modulus, which triggers the transition from formation of a small, damaged zone to activation of crack propagation. STATEMENT OF SIGNIFICANCE: We have studied cavitation nucleation and bubble growth in four different types of soft gels (i.e., tissue simulants) under translational impact. The critical linear acceleration for cavitation nucleation has been measured in the simulants by utilizing a recently developed method that mimics acceleration profiles of typical head blunt events. Each gel type exhibits significantly different trends in the critical acceleration and bubble shape (e.g., A gel-specific sphere-to-saucer transition) with increasing gel stiffness. Our theoretical framework, based on the concepts of a damaged zone and crack propagation in each gel, explains underlying mechanisms of the experimental observations. Our in-depth studies shed light on potential links between traumatic brain injuries and cavitation bubbles induced by translational acceleration, the overlooked mechanism in the literature.

Needle geometry, target migration and substrate interactions in high resolution

Recent investigations considering flexible, steer-able needles for minimally invasive surgery have shown the significance of needle shape in determining the needle-tissue interactions leading to the access of targets. Digital Image Correlation has enabled internal deformation and strain caused by needle insertions to be seen in a soft tissue phantom at high resolution for the first time. Here, the impact of tip design on strains and displacements of material around the insertion axis is presented using Digital Image Correlation in a stable, plane-strain configuration. Insight into the shape of needles to minimise tissue trauma and generate interactions that would enable optimal steering conditions is provided. Needle tips with an included bevel angle up to 40° result in asymmetric displacement of the surrounding tissue phantom. Increasing the included tip angle to 60° results in more predictable displacement and strains that may enhance steering forces with little negative impact on the phantom.

Cavitation-induced damage of soft materials by focused ultrasound bursts: A fracture-based bubble dynamics model

A generalized Rayleigh-Plesset-type bubble dynamics model with a damage mechanism is developed for cavitation and damage of soft materials by focused ultrasound bursts. This study is linked to recent experimental observations in tissue-mimicking polyacrylamide and agar gel phantoms subjected to bursts of a kind being considered specifically for lithotripsy. These show bubble activation at multiple sites during the initial pulses. More cavities appear continuously through the course of the observations, similar to what is deduced in pig kidney tissues in shock-wave lithotripsy. Two different material models are used to represent the distinct properties of the two gel materials. The polyacrylamide gel is represented with a neo-Hookean elastic model and damaged based upon a maximum-strain criterion; the agar gel is represented with a strain-hardening Fung model and damaged according to the strain-energy-based Griffith's fracture criterion. Estimates based upon independently determined elasticity and viscosity of the two gel materials suggest that bubble confinement should be sufficient to prevent damage in the gels, and presumably injury in some tissues. Damage accumulation is therefore proposed to occur via a material fatigue, which is shown to be consistent with observed delays in widespread cavitation activity.

Fracture and adhesion of soft materials: a review

Soft materials are materials with a low shear modulus relative to their bulk modulus and where elastic restoring forces are mainly of entropic origin. A sparse population of strong bonds connects molecules together and prevents macroscopic flow. In this review we discuss the current state of the art on how these soft materials break and detach from solid surfaces. We focus on how stresses and strains are localized near the fracture plane and how elastic energy can flow from the bulk of the material to the crack tip. Adhesion of pressure-sensitive-adhesives, fracture of gels and rubbers are specifically addressed and the key concepts are pointed out. We define the important length scales in the problem and in particular the elasto-adhesive length Γ/E where Γ is the fracture energy and E is the elastic modulus, and how the ratio between sample size and Γ/E controls the fracture mechanisms. Theoretical concepts bridging solid mechanics and polymer physics are rationalized and illustrated by micromechanical experiments and mechanisms of fracture are described in detail. Open questions and emerging concepts are discussed at the end of the review.

Cell shapes and patterns as quantitative indicators of tissue stress in the plant epidermis

In a confluent, single-cell tissue layer, we show that cell shapes and statistics correlate directly with the tissue's mechanical properties, described by an energy functional with generic interfacial terms only. Upon increasing the cohesive component of the model, we observe a clear transition from a tense state with isotropic cells to a relaxed state with anisotropic cells. Signatures of the transition are present in the interfacial mechanics, the domain geometry, and the domain statistics, thus linking all three fields of study. This transition persists for all cell size distributions, but its exact position is crucially dependent on fluctuations in the parameter values of the functional (quenched disorder). The magnitude of fluctuations can be matched to the observed shape distribution of cells, so that visual observation of cell shapes and statistics provides information about the mechanical state of the tissue. Comparing with experimental data from the Cucumis epidermis, we find that the system is located right at the transition, allowing the tissue to relieve most of the local stress while maintaining integrity.

Microfabricated polyacrylamide devices for the controlled culture of growing cells and developing organisms

The ability to spatially confine living cells or small organisms while dynamically controlling their aqueous environment is important for a host of microscopy applications. Here, we show how polyacrylamide layers can be patterned to construct simple microfluidic devices for this purpose. We find that polyacrylamide gels can be molded like PDMS into micron-scale structures that can enclose organisms, while being permeable to liquids, and transparent to allow for microscopic observation. We present a range of chemostat-like devices to observe bacterial and yeast growth, and C. elegans nematode development. The devices can integrate PDMS layers and allow for temporal control of nutrient conditions and the presence of drugs on a minute timescale. We show how spatial confinement of motile C. elegans enables for time-lapse microscopy in a parallel fashion.