Critical role of depressurization and effects of saturation conditions in the formation of β-Crystal during isotactic polypropylene foaming with supercritical CO2

Ordered structure effects on β-nucleated isotactic polypropylene/graphene oxide composites with different thermal histories

In this paper, the influence of ordered structure effects (OSE) on crystallization behaviors of β-nucleated isotactic polypropylene/graphene oxide (β-iPP/GO) composites with different thermal histories, which crystallized at a slow cooling rate (called SLOW), fast cooling rate (called FAST) and medium cooling rate (called MED), respectively, was studied by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). The ordered structure status of three samples before crystallization measurement was controlled by tuning the fusion temperature T_f and melting time t_m. The results showed that for all samples, OSE would occur in an appropriate T_f region (Region II). The OSE efficiency of MED was the highest, while that of SLOW were the lowest. It was also found that the crystallinity and crystalline perfection of SLOW were the highest, while those of FAST were the lowest. The effects of the melting time t_m on the OSE were also investigated. At T_f = 172 °C, the OSE efficiency of FAST reached the maximum at t_m = 5 min, while that of SLOW reached the maximum at t_m = 20 min. It was indicated that the OSE efficiency was affected by thermal history, and it could be improved by selecting the appropriate t_m. Related mechanisms concerning the roles of thermal history on the OSE behavior were proposed based on the results of DSC and in situ SAXS.

In this paper, the influence of ordered structure effects on crystallization behaviors of β-nucleated isotactic polypropylene/graphene oxide composites with different thermal histories was studied.

Crystalline Modification and Its Effects on Dielectric Breakdown Strength and Space Charge Behavior in Isotactic Polypropylene

Adding nucleating agents (NAs) is one of the most efficient ways to obtain improved mechanical, optical, and thermal properties of isotactic polypropylene (iPP). While it is well appreciated that electrical property is critically affected by crystalline modification, the role between them remains unclear. Here, we address this issue by incorporating commercial α-NA and β-NA into iPP, both of which exhibit strong nucleation ability, e.g., reducing the size of crystalline agglomerates from 45.3 μm (Pure-iPP) to 2.5 μm (α-iPP) and 7.6 μm (β-iPP), respectively. Mechanical testing results show that while β-modification decreases the tensile strength a little, it does enhance the elongation at break (200%) and toughness (25.3% higher), relative to its unfilled counterparts. Moreover, a well-dispersed β-iPP system obtains a comprehensive improvement of electrical properties, including dielectric breakdown strength, space charge suppression, and internal field distortion under a high external field (-100 kV/mm) due to newly-generated deep charge trapping sites. This crystalline modification strategy is attractive for future development of many engineering insulating polymers.