Effects of Polymer Properties on Solid-State Shear Pulverization: Thermoplastic Processability and Nanofiller Dispersibility

Solid-state shear pulverization (SSSP) is an alternative polymer processing technique based on twin-screw extrusion with a continuous cooling system. In SSSP, low-temperature mechanochemistry modifies the macromolecular architecture and morphology, which in turn leads to physical property changes in the material. While a wide range of homopolymers, polymer blends, and polymer (nano)composites have been previously developed with SSSP, a fundamental understanding of how mechanochemistry affects polymer chain architecture and structure, and in turn, material properties, has not been elucidated. This paper conducts a systematic processing-structure-property relationship investigation of 10 thermoplastic polymers with varying properties, as they are subjected to consistent SSSP mechanochemical pulverization and nanocomposite compounding. Structural, mechanical, and thermal characteristics of the neat polymers are correlated to their response to SSSP by way of process covariants. Further, we investigate how SSSP processing parameters cause structural changes such as molecular weight reduction and filler dispersion level, which in turn dictate system properties like melt viscosity and thermal stability. Mechanochemical engagement with a high degree of physical contact during pulverization and compounding, characterized by the SSSP covariants exhibiting specific mechanical energy values above 4 kJ/g and an average screw temperature above 20 °C, is ensured when polymers have a glass transition temperature below the processing temperature (<50 °C) and high toughness (>40 MPa). Crystallinity and low thermal diffusivity (<0.2 mm²/s) are additional factors for engaged SSSP processing. Chain scission is an unavoidable outcome of SSSP, though the associated molecular weight reduction was <10% for 7 out of 10 polymers. The elucidated processing-structure-property relationships would allow the SSSP process for a given polymer system to be tailored to the specific needs for molecular structure alterations and performance improvements.

Polylactic Acid Chemical Foaming Assisted by Solid-State Processing: Solid-State Shear Pulverization and Cryogenic Milling

A chemical foaming process of polylactic acid (PLA) was developed via the solid-state processing methods of solid-state shear pulverization (SSSP) and cryogenic milling. Based on the ability of solid-state processing to enhance the crystallization kinetics of PLA, chemical foaming agents (CFA) are first compounded before foaming via compression molding. Specifically, the effects of the pre-foaming solid-state processing method and CFA concentration were investigated. Density reduction, mechanical properties, thermal behavior, and cell density of PLA foams are characterized. Solid-state processing of PLA before foaming greatly increases the extent of PLA foaming by achieving void fractions approximately twice that of the control foams. PLA's improved ability to crystallize is displayed through both dynamic mechanical analysis and differential scanning calorimetry. The solid-state-processed foams display superior mechanical robustness and undergo low stress relaxation. The cell density of the PLA foams also increases with solid-state processing, especially through SSSP. Additionally, crosslinking of PLA during the pre-foaming processing step is found to result in the greatest enhancement of crystallization but decreased void fraction and foam effectiveness. Overall, SSSP and cryogenic milling show significant promise in improving chemical foaming in alternative biopolymers.