Insight on the influence of nano zinc oxide on the thermal, dynamic mechanical, and flow characteristics of Poly(lactic acid)– zinc oxide composites

Enhancing mechanical and thermal properties of bio-composites: Synergistic integration of ZnO nanofillers and nanocrystalline cellulose into durian seed starch matrix

The increasing demand for sustainable materials necessitates advancements in bio-composites with enhanced properties. This study addresses the limitations of Durio zibethinus Murr (DZM) seed starch bio-composites, particularly their poor mechanical strength and thermal stability. Using solution casting, zinc oxide (ZnO) nanofillers and nanocrystalline cellulose (NCC) were incorporated into the starch matrix. The optimized composite with 0.4 g ZnO exhibited a significant improvement in crystallinity (79.40 %), tensile strength (0.44 MPa), and thermal stability (15.54 % residual mass). These findings highlight the potential of the developed bio-nanocomposites for applications in food packaging and medical devices, combining enhanced durability with environmental sustainability.

The effects of ZnO nanoparticle reinforcement on thermostability, mechanical, and optical properties of the biodegradable PBAT film

Among various nanomaterials used for food packaging, zinc oxide (ZnO) nanoparticles are one of the best choices due to their high antimicrobial property. However, for biodegradable materials like poly(butylene adipate-co-terephthalate) (PBAT), biodegradability can be limited by the antibacterial function. Thus, in the present study, reinforced PBAT films with different weight percentages (1, 3, and 5 wt%) of ZnO nanoparticles were prepared by the casting process to investigate the effects of ZnO on the thermostability, mechanical, and antimicrobial properties of the PBAT film. The results showed that the small amount of ZnO (1 wt%) reduced the decomposition temperature of the PBAT film by nearly 50 °C, and the thermal stability was significantly decreased with the increasing ZnO content. Melt flow index comparison showed that the ZnO nanoparticles accelerated the room temperature degradation rate of PBAT films. In addition, due to the degradation effect of ZnO nanoparticles, the mechanical properties such as the total percentage of elongation (at break), the tensile strength, and yield strength decreased with the addition of ZnO nanoparticles. The antibacterial test showed that PBAT + 1 wt% ZnO films could achieve high antibacterial activity (R = 6.8) against Escherichia coli. This study is important for controlling the degradation period of biodegradable materials.

Adding Value in Production of Multifunctional Polylactide (PLA)-ZnO Nanocomposite Films through Alternative Manufacturing Methods

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites.

Role of Hybrid Nano-Zinc Oxide and Cellulose Nanocrystals on the Mechanical, Thermal, and Flammability Properties of Poly (Lactic Acid) Polymer

Biopolymers with universal accessibility and inherent biodegradability can offer an appealing sustainable platform to supersede petroleum-based polymers. In this research, a hybrid system derived from cellulose nanocrystals (CNCs) and zinc oxide (ZnO) nanoparticles was added into poly (lactic acid) (PLA) to improve its mechanical, thermal, and flame resistance properties. The ZnO-overlaid CNCs were prepared via the solvent casting method and added to PLA through the melt-blending extrusion process. The composite properties were evaluated using SEM, a dynamic mechanical analyzer (DMA), FTIR TGA, and horizontal burning tests. The results demonstrated that the incorporation of 1.5% nano-CNC-overlaid ZnO nanoparticles into PLA enhanced the mechanical and thermal characteristics and the flame resistance of the PLA matrix. Oxidative combustion of CNC-ZnO promoted char formation and flame reduction. The shielding effect from the ZnO-CNC blend served as an insulator and resulted in noncontinuous burning, which increased the fire retardancy of nanocomposites. By contrast, the addition of ZnO into PLA accelerated the polymer degradation at higher temperature and shifted the maximum degradation to lower temperature in comparison with pure PLA. For PLA composites reinforced by ZnO, the storage modulus decreased with ZnO content possibly due to the scissoring effect of ZnO in the PLA matrix, which resulted in lower molecular weight.

Surface Modification of Basalt Fibres with ZnO Nanorods and Its Effect on Thermal and Mechanical Properties of PLA-Based Composites

The composites based on basalt fibres and poly(lactic acid) (PLA) show promising applications in biomedical and automotive fields, but their mechanical performance is still largely hindered by poor interfacial properties. Zinc oxide nanorods have been successfully used to tune the PLA/basalt fibre interface by growing them on commercially available basalt fabrics. The hierarchical fibres significantly enhanced the mechanical properties of PLA-based composites, especially their flexural strength and stiffness. These values are 26% and 22% higher than those of unmodified basalt/PLA composites, and 24% and 34% higher than those of glass/PLA composites used as a baseline. The increase in tensile and flexural properties hinges on the mechanical interlocking action promoted by ZnO nanorods and on the creation of a compact transcrystallinity structure. A degradation of PLA matrix was detected but it was positively counteracted by the better interfacial stress transfer. This study offers a novel approach for modifying the fibre-matrix interface of biocomposites intended for high-performance applications.