Development of hierarchical surface roughness on porous poly (vinylidene fluoride) membrane for membrane distillation process

Tuning PVDF Membrane Porosity and Wettability Resistance via Varying Substrate Morphology for the Desalination of Highly Saline Water

Here, we report the fabrication of a series of highly efficient polyvinylidene fluoride (PVDF) membranes via substrate morphology variations. A wide range of sandpaper grit sizes (150-1200) were utilized as casting substrates. The effect of the penetration of abrasive particles present on the sandpapers on the casted polymer solution was tuned, and the impact of these particles on porosity, surface wettability, liquid entry pressure and morphology were investigated. The membrane distillation performance of the developed membrane on sandpapers was evaluated for the desalination of highly saline water (70,000 ppm). Interestingly, the utilization of cheap and widely available sandpapers as a substrate for casting can not only help in tuning the MD performance, but also in producing highly efficient membranes with stable salt rejection (up to 100%) and a 210% increase in the permeate flux over 24 h. The findings in this study will help in delineating the role of substrate nature in controlling the produced membrane characteristics and performance.

Stability of Ar/O2 Plasma-Treated Polypropylene Membranes Applied for Membrane Distillation

In the present work, Ar/O₂ plasma treatment was used as a surface modification tool for polypropylene (PP) membranes. The effect of the plasma conditions on the properties of the modified PP surface has been investigated. For this purpose, the influence of gas composition and its flow rate, plasma power excitation as well as treatment time on the contact angle of PP membranes has been investigated. The properties of used membranes were determined after various periods of time: immediately after the modification process as well as after one, four and five years of storage. Moreover, the used membranes were evaluated in terms of their performance in long-term MD process. Through detailed studies, we demonstrated that the performed plasma treatment process effectively enhanced the performance of the modified membranes. In addition, it was shown that the surface modification did not affect the degradation of the membrane matrix. Indeed, the used membranes maintained stable process properties throughout the studied period.