Synthesis, spectroscopy, band gap energy and electrical conductivity of poly(dopamine-co-aniline) copolymer

Copolymerization is used to improve the solubility and processability of polymers and copolymers includes the individual properties of homopolymer. In this study, the poly(dopamine-co-aniline) (poly(DA-co-ANI) copolymer was synthesized and the UV-vis. absorption, optical band gap energy, fluorescence, FT-IR, SEM-EDS, MALDI-TOF-MS, XRD and electrical conductivity have been investigated. The obtained results for the poly(DA-co-ANI) copolymer were compared with the PDA and PANI homopolymers. It was observed that the poly(DA-co-ANI copolymer is soluble easily in NMP and DMF solvents. The optical band gap energy of the poly(DA-co-ANI) copolymer film were calculated. as 1.00 eV with favorable indirect transition. The poly(DA-co-ANI) copolymer showed the FL emission maximum bands at 390 and 533 nm wavelengths. It was observed from the SEM images that the poly(DA-co-ANI) has 0-1500 nm crystalline rectangular particles prepared in acidic media and 0-600 nm amorphous particles prepared in basic media. The electrical conductivity of the poly(DA-co-ANI) was 1.35 × 10-6 S/cm. In the MALDI-TOF-MS measurements, the number-average molecular weight of the copolymer was found as 2628 Da with a distribution up to 5500 Da. The poly(DA-co-ANI) copolymer, soluble in NMP and DMF solvents and with a low optical band gap energy can be utilized as optical, fluorescent, and semi-conductive material in biomedical applications.

Broad-class volatile organic compounds (VOCs) detection via polyaniline/zinc oxide (PANI/ZnO) composite materials as gas sensor application

Metal-oxide doped conductive polymers have been investigated as sensors in the field of gas-sensing. Recent developments have highlighted the role of intrinsically conductive polymers, that have reportedly offered high surface response towards the detection of volatile organic compounds (VOCs). In this work, we optimize the development of gas-sensors made of Polyaniline/Zinc oxide (PANI/ZnO) composite, capable of detecting a varied class of VOCs such as, ammonia, acetone, formaldehyde, methanol, and ethanol. The conductivity of these sensors is evaluated at room temperature and are investigated until saturation. In addition to the final application, this work also focusses on the synthesis strategies to achieve an 'optimal' matrix-to-additive ratio, such that superior chemical response is paralleled with mechanical robustness for PANI based sensors. The PANI/ZnO composites are casted into sensors bearing different additive ratios, via a drop-casting method and the same is evaluated for its formability and mechanical behavior. Physio-chemical characterization was performed using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), and Energy Dispersive X-ray Analysis (EDX) and we report on an exceptional selectivity for ammonia with an average sensor response of 3496.67 mV by all the sensors, when fabricated using different matrix-additive ratios. This result is superior to what is observed for Pure- PANI sensors that were selective only to methanol and ethanol. The addition of ZnO in the smallest fraction, already offers a broader range of selectivity, e.g., PANI/ZnO 90:10 sensor was selective to formaldehyde as assessed using pattern recognition.

Optical and temperature dependent electrical properties of poly (vinyl chloride)/copper alumina nanocomposites for optoelectronic devices

The practical applications of poly (vinyl chloride) have been constrained due to its poor thermal stability, low dielectric constant and inability to shield against ultraviolet (UV) radiation. In this study, we tried to improve the optical properties, thermal stability, temperature-dependent electrical conductivity and dielectric constant using copper alumina (Cu–Al2O3) nanoparticles reinforced poly (vinyl chloride) (PVC). Optical absorption measured with an ultraviolet-visible (UV-visible) spectrometer emphasises the blueshift in absorption edges and decreasing bandgap energies of PVC/Cu–Al2O3 nanocomposites compared to PVC. The presence of Cu–Al2O3 in PVC and its interaction with the polymer were confirmed by FTIR spectroscopy. Thermogravimetric analysis (TGA) demonstrates that nanocomposites have higher thermal stability than PVC, and that thermal stability increases with filler loading. Scanning electron microscopy (SEM) indicates the homogeneous dispersion of nanosized Cu–Al2O3 in the polymer matrix. The activation energy determined by the Arrhenius equation revealed that AC conductivity increases with the addition of nanoparticles up to a specific loading. The dielectric constant increases as a function of temperature and decreases with frequency. The magnitude of AC conductivity and dielectric constant were highest for 7 wt% loaded nanocomposites. The dielectric constant predicted by the Bruggeman and Maxwell-Garnet models were in good agreement with the experimental permittivity. The semiconducting nature of nanocomposites was investigated by impedance analysis. The semi-circular nature of Cole-Cole plots manifests the combination of parallel capacitance with low bulk resistance. The enhanced optical, thermal, electrical and dielectric properties of PVC/Cu–Al2O3 nanocomposites can be utilized in fabricating optoelectronic devices with excellent charge-storing ability.