Characterization and role of an elastomeric interphase on carbon fibers reinforcing an epoxy matrix

Constructing a Rigid-and-Flexible Twin-Stage Gradient Interphase through Starlike Copolymer Coating on Carbon Fibers: A Route for Enhancing Interfacial Properties of Composites

A rigid-and-flexible interphase was established by a starlike copolymer (Pc-PGMA/Pc) consisting of one tetraaminophthalocyanine (TAPc) core with four TAPc-difunctionalized poly(glycidyl methacrylate) (PGMA) arms through the surface modification of carbon fibers (CFs) and compared with various interphases constructed by TAPc and TAPc-connected PGMA (Pc-PGMA). The increase in the content of N-C═O showed that PGMA/Pc branches were successfully attached onto the CF-(Pc-PGMA/Pc) surface, exhibiting concavo-convex microstructures with the highest roughness. Through adhesive force spectroscopy by atomic force microscopy (AFM) with peak force quantitative nanomechanical mapping (PF-QNM) mode and visualization of the relative distribution of TAPc/PGMA via a Raman spectrometer, a rigid interphase with highly cross-linked TAPc and a flexible layer from PGMA arms as the soft segment were separately detected in CF-TAPc/EP and CF-(Pc-PGMA)/EP composites. The rigid-and-flexible interphase in the CF-(Pc-PGMA/Pc)/EP composite provided excellent stress-transfer capability by the rigid inner modulus intermediate layer and energy absorption efficiency from the flexible outer layer, which contributed to 64.6 and 61.8% increment of transverse fiber bundle test (TFBT) strength, and 33.8 and 40.6% enhancement in interfacial shear strength (IFSS) in comparison with those of CF-TAPc/EP and CF-(Pc-PGMA)/EP composites. Accordingly, schematic models of the interphase reinforcing mechanism were proposed. The interfacial failures in CF-TAPc/EP and CF-(Pc-PGMA)/EP composites were derived from the rigid interphase without effective relaxation of interfacial stress and soft interphase with excessive fiber-matrix interface slippage, respectively. The cohesive failure in the CF-(Pc-PGMA/Pc)/EP composite was attributed to the crack deflection through the balance of the modulus and deformability from the twin-stage gradient intermediate layer.

Relationships between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting matrixes containing a 4'-(hexyloxy)-4-biphenylcarbonitrile liquid crystal

Meso/nanostructured thermoresponsive thermosetting materials based on an epoxy resin modified with two different molecular weight amphiphilic poly(styrene- block-ethylene oxide) block copolymers (PSEO) and a low molecular weight liquid crystal, 4'-(hexyloxy)-4-biphenylcarbonitrile (HOBC), were investigated. A strong influence of the addition of PSEO on the morphology generated in HOBC--(diglicydyl ether of bisphenol A epoxy resin/ m-xylylenediamine) was detected, especially in the case of the addition of PSEO block copolymers with a higher PEO-block content and a lower molecular weight. The morphologies generated in the ternary systems also influenced the thermoresponsive behavior of the HOBC separated phase provoked by applying an external field, such as a temperature gradient and an electrical field. Thermal analysis of the investigated materials allowed for a better understanding of the relationships between generated morphology/thermo-optical properties/PSEO:HOBC ratio, and HOBC content. Controlling the relationship between the morphology and thermoresponsive behavior in micro/nanostructured thermosetting materials based on a 4'-(hexyloxy)-4-biphenylcarbonitrile liquid crystal allows the development of materials which can find application in thermo- and in some cases electroresponsive devices, with a high contrast ratio between transparent and opaque states.