A statistical study of poly(?-caprolactone) crystallinity in poly(?-caprolactone)-silica sol-gel materials and theirin vitro calcium phosphate-forming ability

A New Class II Poly (ε-Caprolactone)-Silica Hybrid: Synthesis and In Vitro Apatite Forming Ability

The synthesis of a new class II poly(ε-caprolactone)-silica hybrid has been carried out using tin (II) 2-ethylhexanoate as the catalyst. Swelling behaviour, solid state 29 Si NMR and other techniques indicate the formation of interconnected organic-inorganic materials. An in vitro apatite forming ability test performed on this new class of material compared with an equivalent class I poly(ε-caprolactone)-silica sol-gel hybrid (identical silica content) showed the absence of apatite formation on the class II hybrid surface and calcium phosphate precipitation on the class I hybrid surface. This effect may be linked to less silicic acid being released in the simulated body fluid for the class II hybrid compared to the class I hybrid.

Bioactive starch-based scaffolds and human adipose stem cells are a good combination for bone tissue engineering

Silicon is known to have an influence on calcium phosphate deposition and on the differentiation of bone precursor cells. This study explores the effect of the incorporation of silanol (Si-OH) groups into polymeric scaffolds on the osteogenic differentiation of human adipose stem cells (hASC) cultured under dynamic and static conditions. A blend of corn starch with polycaprolactone (30/70 wt.%, SPCL) was used to produce three-dimensional fibre meshes scaffolds by the wet-spinning technique, and a calcium silicate solution was used as a non-solvent to develop an in situ functionalization with Si-OH groups. In vitro assessment, using hASC, of functionalized and non-functionalized scaffolds was evaluated in either α-MEM or osteogenic medium under static and dynamic conditions (provided by a flow perfusion bioreactor). The functionalized materials, SPCL-Si, exhibit the capacity to sustain cell proliferation and induce their differentiation into the osteogenic lineage. The formation of mineralization nodules was observed in cells cultured on the SPCL-Si materials. Culturing under dynamic conditions using a flow perfusion bioreactor was shown to enhance the hASC proliferation and differentiation and a better distribution of cells within the material. The present work demonstrates the potential of these functionalized materials for future applications in bone tissue engineering. Additionally, these results highlight the simplicity, economic and reliable production process of those materials.

Hydroxyapatite formation on sol-gel derived poly(ε-caprolactone)/bioactive glass hybrid biomaterials

Investigation of novel biomaterials for bone regeneration is based on the development of scaffolds that exhibit bone-bonding ability, biocompatibility, and sufficient mechanical strength. In this study, using novel poly (ε-caprolactone)/bioactive glass (PCL/BG) hybrids with different organic/inorganic ratios, the effects of BG contents on the in vitro bone-like hydroxyapatite (HA) formation, mechanical properties, and biocompatibility were investigated. Rapid precipitation of HA on the PCL/BG hybrid surfaces were observed after incubating in simulated body fluid (SBF) for only 6 h, as confirmed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), and inductively coupled plasma atomic emission spectroscopy (ICPS). The ICPS elemental analysis results were further analyzed in terms of the Ca(2+) and PO4(3-) which were consumed to form the apatite layer. The results revealed that the rate and total amount of HA deposition decreased with an increase in PCL content. The compressive modulus and strength of the PCL/BG hybrids increased with the decrease in PCL content. The highest values were achieved at the lowest PCL content (10 wt %) and were around, 90 MPa and 1.4 GPa, respectively. To evaluate the cytotoxicity of PCL/BG bioactive hybrids, MC3T3-E1 osteoblast-like cells were cultured for up to 72 h. Our data indicated that whereas initial cell attachment was marginally lower than the control tissue culture poly styrene (TCPS) surface, the hybrid materials promoted cell growth in a time-dependent manner. Cell viability within the different PCL/BG hybrid samples appeared to be influenced by compositional differences whereby higher PCL contents correlated with slight reduction in cell viability. Taken together, this study adds important new information to our knowledge on hydroxyapatite formation, mechanical properties, and cytotoxic effects of PCL/BG hybrids prepared by the sol-gel process using a tertiary glass composition and may have considerable potential for bone tissue regeneration applications.

Modern biomaterials: a review - bulk properties and implications of surface modifications

This review concerns the importance of length and time on physicochemical interactions between living tissue and biomaterials that occur on implantation. The review provides information on material host interactions, materials for medical applications and cell surface interactions, and then details the extent of knowledge concerning the role(s) that surface chemistry and topography play during the first stage of implant integration, namely protein adsorption. The key points are illustrated by data from model in vitro studies. Host implant interactions begin nanoseconds after first contact and from then on are in a state of flux due to protein adsorption, cell adhesion and physical and chemical alteration of the implanted material. The many questions concerning the conformational form and control of bound proteins and how this may impact on cell adhesion in the first instance and later on cell signalling and implant integration can be answered by systematic investigations using model materials. Only then we will be in a more informed position to design new materials for use in the body.

Comparative study of the in vitro apatite-forming ability of poly(epsilon-caprolactone)-silica sol-gels using three osteoconductivity tests (static, dynamic, and alternate soaking process)

The in vitro apatite-forming ability of poly(epsilon-caprolactone) (70 wt %)-silica sol-gels, with hydroxyl and triethoxysilane end-groups with potential use in bone repair have been assessed using static and dynamic osteoconductivity tests. Diffuse reflectance infrared spectroscopy, scanning electron microscopy, and microanalysis techniques were used to observe and characterize precipitates formed on the material's surface. An apatite layer was observed to form on both of the composites' surface. However, variations were observed according to the test method used, in accordance with other studies on bioactive ceramics. A third method, the "alternate soaking process" (ASP) was developed to provide rapid results and quantify the amount of calcium-containing precipitates formed on the surface of potentially "bioactive" materials. The results presented here show that for a material to be bioactive and have the ability to form a precipitate containing calcium and phosphate ions, levels of calcium ions measured by a complexometric assay should be significantly higher than the level of 5 microg/cm(2). This level of calcium ions was obtained after 20 ASP cycles for the hydroxyl and triethoxysilane end-capped poly(epsilon-caprolactone) samples that did not form precipitates on their surfaces even after >50 ASP cycles. For the two sol-gel silica composites containing approximately 70% hydroxyl and triethoxysilane poly(epsilon-caprolactone), there was no significant difference in the amount of calcium-containing precipitate as observed using the in vitro apatite-forming ability tests suggesting that polymer end-group modification is not detrimental to the apatite-forming ability of such composites.