Zwitterionic sulfobetaine-modified non-woven fabric for blood filtration

The strategy of modulation blood responses by surface modification with different functional groups on polyester film

A main problem in the design of blood-contacting biomaterials has been the deficiency of a systematic understanding of blood-biomaterial interactions and the strategy to modulate blood responses. In this work, different functional groups including carboxyl (COOH), hydroxyl (OH) and zwitterionic sulfobetaine group (⊕N((CH₃ )₂ )(CH₂ )₃ SO_3-○- , SMDB) were grafted on the poly (butylene terephthalate) (PBT) film to study how the functional groups modulate blood responses and in terms of interaction with the coagulation system, the complement system, and platelets. The results showed protein absorption and platelet adhesion was stronger on the PBT bearing COOH group than PBT films bearing OH and zwitterionic sulfobetaine groups (total protein (μg/cm² ): 32.92 ± 5.89 vs. 22.02 ± 1.44 vs. 19.09 ± 1.59; platelet adhesion (/mm² ): 1,626.7 ± 120.1 vs. 1,395.6 ± 363.3 vs. 1,102.2 ± 373.7), which had a rougher and negatively charged surface, and the coagulation system was inhibited by binding fibrinogen (Fg) and coagulation factors. Meanwhile, PBT-PSMDB showed anticoagulant property and induced platelet activation. As a result, complement formation on these two films were less than PBT bearing OH groups by inhibiting the coagulation system (C3a (ng/ml): 3,745.4 ± 143.9 vs. 3,290.9 ± 249.7 vs. 4,887.9 ± 88.9; C5a (ng/ml): 22.1 ± 2.6 vs. 22.3 ± 1.8 vs. 27.9 ± 2.0). On the other hand, PBT bearing OH groups did not facilitate remarkable platelet adhesion and activation, and had no influence on platelet aggregation, hypotonic shock response, and coagulation system. The above results showed that the blood responses were highly interlinked, and could be modulated by grafting with different functional groups on the biomaterial surfaces. These findings may help identify a strategy to design materials with better hemocompatibility for blood contact, filtration, and purification applications.

Self-Propulsion and Shape Restoration of Aqueous Drops on Sulfobetaine Silane Surfaces

The motion of droplets on typical surfaces is generally halted by contact line pinning associated with contact angle hysteresis. In this study, it was shown that, on a zwitterionic sulfobetaine silane (SBSi)-coated surface, aqueous drops with appropriate solutes can demonstrate hysteresis-free behavior, whereas a pure water drop shows spontaneous spreading. By adding solutes such as polyethylene glycol, 2(2-butoxy ethoxy) ethanol, or sodium n-dodecyl sulfate, an aqueous drop with a small contact angle (disappearance of spontaneous spreading) was formed on SBSi surfaces. The initial drop shape was readily relaxed back to a circular shape (hysteresis-free behavior), even upon severe disturbances. Moreover, it was interesting to observe the self-propulsion of such a drop on horizontal SBSi surfaces in the absence of externally provided stimuli. The self-propelled drop tends to follow a random trajectory, and the continuous movement can last for at least 10 min. This self-propelled random motion can be attributed to the combined effects of the hysteresis-free surface and the Marangoni stress. The former comes from the total wetting property of the surface, while the latter originates from surface tension gradient due to fluctuating evaporation rates along the drop border.

Development of zwitterionic copolymers with multi-shape memory effects and moisture-sensitive shape memory effects

This paper describes a new kind of zwitterionic copolymer having a multi-shape memory effect and a moisture-sensitive shape memory effect from DMAPS and acrylic acid (AA). In addition to dual-SME, the copolymer also shows triple-SME and quadruple-shape-memory effect.

Zwitterionic sulfobetaine-grafted poly(vinylidene fluoride) membrane with highly effective blood compatibility via atmospheric plasma-induced surface copolymerization

Development of nonfouling membranes to prevent nonspecific protein adsorption and platelet adhesion is critical for many biomedical applications. It is always a challenge to control the surface graft copolymerization of a highly polar monomer from the highly hydrophobic surface of a fluoropolymer membrane. In this work, the blood compatibility of poly(vinylidene fluoride) (PVDF) membranes with surface-grafted electrically neutral zwitterionic poly(sulfobetaine methacrylate) (PSBMA), from atmospheric plasma-induced surface copolymerization, was studied. The effect of surface composition and graft morphology, electrical neutrality, hydrophilicity and hydration capability on blood compatibility of the membranes were determined. Blood compatibility of the zwitterionic PVDF membranes was systematically evaluated by plasma protein adsorption, platelet adhesion, plasma-clotting time, and blood cell hemolysis. It was found that the nonfouling nature and hydration capability of grafted PSBMA polymers can be effectively controlled by regulating the grafting coverage and charge balance of the PSBMA layer on the PVDF membrane surface. Even a slight charge bias in the grafted zwitterionic PSBMA layer can induce electrostatic interactions between proteins and the membrane surfaces, leading to surface protein adsorption, platelet activation, plasma clotting and blood cell hemolysis. Thus, the optimized PSBMA surface graft layer in overall charge neutrality has a high hydration capability and the best antifouling, anticoagulant, and antihemolytic activities when comes into contact with human blood.