Organosoluble asymmetric aromatic polyamides bearing pendent phenoxy groups

Preparation and Properties of Mechanically Robust, Colorless, and Transparent Aramid Films

In this study, various diamine monomers were used to synthesize aramid polymer films via a low-temperature solution condensation reaction with diacid chloride. For diamines with relatively high basicity, the reaction system became opaque because amine salt formation inhibited polymer synthesis. Meanwhile, low-basicity diamines with strong electron-withdrawing groups, such as CF3 and sulfone, were smoothly polymerized without amine salt formation to provide highly viscous solutions. The acid byproduct HCl generated during polymerization was removed by adding propylene oxide to the reaction vessel and converting the acid into highly volatile inert substances. The resulting solutions were used as varnishes without any additional purification, and polymer films with an excellent appearance were easily obtained through a conventional casting and convection drying process. The films neither tore nor broke when pulled or bent by hand; furthermore, even when heated up to 400 °C, they did not decompose or melt. Moreover, polymers prepared from 2,2-bis(trifluoromethyl)benzidine (TFMB) and bis(4-aminophenyl)sulfone (pAPS) did not exhibit glass transition until decomposition. The prepared polymer films showed a high elastic modulus of more than 4.1 GPa and a high tensile strength of more than 52 MPa. In particular, TFMB-, pAPS-, and 2,2-bis(4-aminophenyl)hexafluoropropane-based polymer films were colorless and transparent, with very high light transmittances of 95%, 96%, and 91%, respectively, at 420 nm and low yellow indexes of 2.4, 1.9, and 4.3, respectively.

New fluorinated poly(pyridine amide)s derived from 2,6-bis(4-iodophenyl)-4-(4-trifluoromethylphenyl)pyridine by C–N coupling reaction

2,6-Bis(4-iodophenyl)-4-(4-trifluoromethylphenyl)pyridine, as a new aromatic diiodide compound, was synthesized through a one-pot protocol by the sequential diazotization-iodination of 2,6-bis(4-aminophenyl)-4-(4-trifluoromethylphenyl)pyridine with KI/NaNO2/ p-TsOH in acetonitrile at room temperature. A number of new aromatic fluorinated poly(pyridine amide)s containing 2,6-diphenyl-4-(4-trifluoromethylphenyl)pyridine units were prepared via a Pd(PPh3)2Cl2 catalyzed carbonylation polymerization of this diiodide, diamines and carbon monoxide in DMAc in the presence of PPh3 and 1,8-diazabicyclo[5,4,0]-7-undecene. These new polyamides with inherent viscosities of 0.63–0.72 dL/g were amorphous and easily soluble in amide type aprotic solvents such as NMP, DMAc, DMF and dimethyl sulfoxide at room temperature. Thermal analysis data up to 800°C in nitrogen showed their high thermal behavior with 5% weight loss temperature of 428–498°C and char yield of 62–69%. Their limiting oxygen index of 42.3–45.1 showed that the resulting poly(pyridine amide)s could be classified as “self-extinguishing polymers”. Also, their thin films exhibited high optical transparency with a cut-off wavelength of 324–373 nm.

Synthesis and characterization of new aromatic copoly(ether amide)s bearing 4-trifluoromethylphenyl-2,6-diphenylpyridyl moieties in the main chain

A series of new aromatic fluorinated copoly(ether amide)s containing 4-(4-trifluoromethylphenyl)-2,6-diphenylpyridyl moiety with high molecular weight were prepared by a low-temperature solution polycondensation of terephthaloyl chloride with 4-(4-trifluoromethylphenyl)-2,6-bis(4-aminophenyl)pyridine and 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene with various mole ratios of the two monomers ranged from 20/80 to 80/20. All polymers were amorphous and soluble in common organic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide and tetrahydrofuran at room temperature or upon heating at 70oC, and could be solution cast into transparent, tough, and flexible films with tensile strengths of 66.9–80.2 MPa, tensile moduli of 1.84–2.03 GPa, and elongations at break of 11.8–20.7%. These new polyamides displayed good thermal stability with gradually increasing of glass temperatures of 259–285oC as an increase of the 4-(4-trifluoromethylphenyl)-2,6-diphenylpyridyl component, the temperature at 10% weight loss of 476–505oC, and the residue of 55–61% at 750oC in nitrogen. They also exhibited low dielectric constants of 3.11–3.38 (1 MHz), low moisture absorption in the range of 1.43–1.75%, and high transparency with an UV–vis absorption cut-off wavelength in the 350–368 nm range.

Segmented-Block Poly(ether amide)s Containing Flexible Polydisperse Polyethyleneoxide Sequences and Rigid Aromatic Amide Moieties

We describe the synthesis and characterization of three novel aromatic diamines containing oxyethylene sequences of different lengths. These diamines were polymerized using the low-temperature solution polycondensation method with isophthaloyl chloride (IPC), terepthaloyl chloride (TPC), [1,1'-biphenyl]-4,4'-dicarbonyl dichloride (BDC), and 4,4'-oxybis(benzoyl chloride) (OBE), obtaining twelve poly(ether amide)s with short segments of polydisperse polyethyleneoxide (PEO) sequences in the polymer backbone. These polymers show reasonably high molecular mass materials (Mw > 12,000), and the relationship between their structure and properties has been carefully studied. Compared with conventional polyamides containing monodisperse PEO sequences, the polydispersity of the PEO segments within the structural units exerts a significant influence on the crystallinity, flexibility, solubility, and the thermal properties of the polymers. For instance, the all-para oriented polyamides (TPCP-A), with an average number of 8.2 ethylenoxide units per structural unit can be transformed conventionally (T_m = 259 °C) in comparison with thermally untransformable polymer with 2 ethylenoxide units (T_m = 425 °C).

Synthesis and characterization of semi-aromatic polyamides containing heterocyclic 1,3,5 s-triazine and methylene spacer group for thermally stable and colloidal property

A new aromatic diacid (II) was synthesized and Characterized by Spectroscopic techniques namely, FT-IR, ¹ H and ¹³ C NMR, etc. A series of aromatic aliphatic polyamides containing phenoxy s-triazine ring with methylene spacer group was synthesized from diacid (II) and various aromatic diamines by using Yamazaki Phosphorylation method. These polyamides were obtained in good yields and characterized by solubility in common organic solvent, inherent viscosity, FT-IR, X-ray diffraction analysis. All of these polyamides were found to be amorphous in morphology as indicated by XRD to posses outstanding solubilities, and to be easily dissolved in amide-type polar aprotic polar solvents. Polyamides with moderate inherent viscosity in the range 0.21 to 0.41 dL/g in N,N,dimethyl formamide solvent (DMF) at 30 ± 0.1° C. The Thermal properties of the polyamides were evaluated by Thermogravimetric analysis and Differential scanning calorimetery. These polymer shows good thermal stability with glass transition temperature (T_g) of 143-223°C and their (T_max) weight loss temperature were around 426-455°C, confirming their good thermal stability. The char yields of these polymers were given their limiting oxygen index LOI 32.3 to 37.5 5% values of polyamides; indicate these polymers also show good flame resistance. The NPs were negatively charged with a zeta potential of -24.2 to -37.9 mV indicating a good colloidal stability against aggregation.

Functional Aromatic Polyamides

We describe herein the state of the art following the last 8 years of research into aromatic polyamides, wholly aromatic polyamides or aramids. These polymers belong to the family of high performance materials because of their exceptional thermal and mechanical behavior. Commercially, they have been transformed into fibers mainly for production of advanced composites, paper, and cut and fire protective garments. Huge research efforts have been carried out to take advantage of the mentioned characteristics in advanced fields related to transport applications, optically active materials, electroactive materials, smart materials, or materials with even better mechanical and thermal behavior.

Triptycene based organosoluble polyamides: synthesis, characterization and study of the effect of chain flexibility on morphology

Triptycene based thermally stable, organosoluble and low viscous polyamides have been prepared. Polymers may be categorized as self-extinguishing materials. Relation between structural flexibility and surface morphology has been studied.