Ma Y, Li F, Xu W, Zhang Y, Xu Y, Guo H, Li Y. Influence of Extrusion Temperature on Properties of Graphene Oxide-Carbon Fiber/Epoxy Composite Prepared by Vacuum Infiltration Hot-Press-Forming Experimental System.
NANOMATERIALS (BASEL, SWITZERLAND) 2022;
12:3839. [PMID:
36364615 PMCID:
PMC9657986 DOI:
10.3390/nano12213839]
[Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/17/2022] [Revised: 10/18/2022] [Accepted: 10/27/2022] [Indexed: 06/16/2023]
Abstract
Graphene oxide-carbon fiber/epoxy (GO-CF/EP) composites with extrusion temperatures of 30, 40, 50, 60 and 70 °C were prepared by a vacuum infiltration hot-press-forming experimental system (VIHPS). The effects of extrusion temperature on the microstructure, fracture mechanism and mechanical properties of GO-CF/EP composites were investigated. It was found that the best mechanical property of composites and infiltration effect of the matrix in the fiber gap were obtained at the temperature of 50 °C, and the bending strength of the composite reached 728 MPa. The fiber was pulled out and broken under the wrapping of the matrix. The matrix viscosity was high, and the fluidity was poor when the extrusion temperature was low. The poor infiltration of the matrix resulted in many fibers failing to bond together, resulting in the disorderly breakage of fiber bundles. Under the condition of higher temperature, the flow speed of the matrix could be improved. However, part of the matrix was extruded during the extrusion process, and cracks and other defects occurred during the loading, which caused the brittle fracture of the specimen.
Collapse