Application of low loading of collagen in electrospun poly[(l -lactide)-co -(ε -caprolactone)] nanofibrous scaffolds to promote cellular biocompatibility

Surface-Modified Polypyrrole-Coated PLCL and PLGA Nerve Guide Conduits Fabricated by 3D Printing and Electrospinning

The efficiency of nerve guide conduits (NGCs) in repairing peripheral nerve injury is not high enough yet to be a substitute for autografts and is still insufficient for clinical use. To improve this efficiency, 3D electrospun scaffolds (3D/E) of poly(l-lactide-co-ε-caprolactone) (PLCL) and poly(l-lactide-co-glycolide) (PLGA) were designed and fabricated by the combination of 3D printing and electrospinning techniques, resulting in an ideal porous architecture for NGCs. Polypyrrole (PPy) was deposited on PLCL and PLGA scaffolds to enhance biocompatibility for nerve recovery. The designed pore architecture of these "PLCL-3D/E" and "PLGA-3D/E" scaffolds exhibited a combination of nano- and microscale structures. The mean pore size of PLCL-3D/E and PLGA-3D/E scaffolds were 289 ± 79 and 287 ± 95 nm, respectively, which meets the required pore size for NGCs. Furthermore, the addition of PPy on the surfaces of both PLCL-3D/E (PLCL-3D/E/PPy) and PLGA-3D/E (PLGA-3D/E/PPy) led to an increase in their hydrophilicity, conductivity, and noncytotoxicity compared to noncoated PPy scaffolds. Both PLCL-3D/E/PPy and PLGA-3D/E/PPy showed conductivity maintained at 12.40 ± 0.12 and 10.50 ± 0.08 Scm^-1 for up to 15 and 9 weeks, respectively, which are adequate for the electroconduction of neuron cells. Notably, the PLGA-3D/E/PPy scaffold showed superior cytocompatibility when compared with PLCL-3D/E/PPy, as evident via the viability assay, proliferation, and attachment of L929 and SC cells. Furthermore, analysis of cell health through membrane leakage and apoptotic indices showed that the 3D/E/PPy scaffolds displayed significant decreases in membrane leakage and reductions in necrotic tissue. Our finding suggests that these 3D/E/PPy scaffolds have a favorable design architecture and biocompatibility with potential for use in peripheral nerve regeneration applications.

Development of an Antimicrobial-Coated Absorbable Monofilament Suture from a Medical-Grade Poly(l-lactide-co-ε-caprolactone) Copolymer

In this study, a medical-grade poly(l-lactide-co-ε-caprolactone) (PLC) copolymer with a monomer ratio of l-lactide (L) to ε-caprolactone (C) of 70:30 mol % for use as an absorbable surgical suture was synthesized via ring-opening polymerization (ROP) using a novel soluble liquid tin(II) n-butoxide (Sn(OnC4H9)2) as an initiator. In fiber fabrication, the process included copolymer melt extrusion with a minimal draw followed by sequential controlled hot-drawing and fixed-annealing steps to obtain oriented semicrystalline fibers with improved mechanical strength. For healing enhancement, the fiber was dip-coated with "levofloxacin" by adding the drug into a solution mixture of acetone, poly(ε-caprolactone) (PCL), and calcium stearate (CaSt) in the ratio of acetone/PCL/CaSt = 100:1% w/v:0.1% w/v. The tensile strength of the coated fiber was found to be increased to ∼400 MPa, which is comparable with that of commercial polydioxanone (PDS II) of a similar size. Finally, the efficiency of the drug-coated fiber regarding its controlled drug release and antimicrobial activity was investigated, and the results showed that the coated fiber was able to release the drug continuously for as long as 30 days. For fiber antimicrobial activity, it was found that a concentration of 1 mg/mL was sufficient to inhibit the growth of Staphylococcus aureus (MRSA), Escherichia coli O157:H7, and Pseudomonas aeruginosa, giving a clear inhibition zone range of 20-24 mm for 90 days. Cytotoxicity testing of the drug-coated fibers showed a %viability of more than 70%, indicating that they were nontoxic.

Chitosan as a Biomaterial: Influence of Degree of Deacetylation on Its Physiochemical, Material and Biological Properties

Chitosan is a biomaterial with a range of current and potential biomedical applications. Manipulation of chitosan degree of deacetylation (DDA) to achieve specific properties appears feasible, but studies investigating its influence on properties are often contradictory. With a view to the potential of chitosan in the regeneration of nerve tissue, the influence of DDA on the growth and health of olfactory ensheathing cells (OECs) was investigated. There was a linear increase in OEC proliferation as the DDA increased from 72 to 85%. This correlated with linear increases in average surface roughness (0.62 to 0.78 μm) and crystallinity (4.3 to 10.1%) of the chitosan films. Mitochondrial activity and membrane integrity of OECs was significantly different for OECs cultivated on chitosan with DDAs below 75%, while those on films with DDAs up to 85% were similar to cells in asynchronous growth. Apoptotic indices and cell cycle analysis also suggested that chitosan films with DDAs below 75% were cytocompatible but induced cellular stress, while OECs grown on films fabricated from chitosan with DDAs above 75% showed no significant differences compared to those in asynchronous growth. Tensile strength and elongation to break varied with DDA from 32.3 to 45.3 MPa and 3.6 to 7.1% respectively. DDA had no significant influence on abiotic and biotic degradation profiles of the chitosan films which showed approximately 8 and 20% weight loss respectively. Finally, perceived patterns in property changes are subject to change based on potential variations in DDA analysis. NMR examination of the chitosan samples here revealed significant differences depending upon which peaks were selected for integration; 6 to 13% in DDA values within individual samples. Furthermore, differences between DDA values determined here and those reported by the commercial suppliers were significant and this may also be a source of concern when selecting commercial chitosans for biomaterial research.