Design, preparation and application of conjugated microporous polymers

A microporous polymer based on nonconjugated hindered biphenyls that emits blue light

Microporous organic polymers that have three-dimensional connectivity stemming from monomers with tetrahedral or tetrahedron-like geometry can have high surface areas and strong fluorescence. There are however few examples of such polymers based on hindered biaryls, and their fluorescence has not been studied. Hypothesizing that the contortion in a hindered biphenyl moiety would modulate the optical properties of a polymer built from it, we synthesized a meta-enchained polyphenylene from a 2,2',6,6'-tetramethylbiphenyl-based monomer, in which the two phenyl rings are nearly mutually perpendicular. The polymer was microporous with SBET = 495 m2 g-1. The polymer absorbed near-UV light and emitted blue fluorescence despite the meta-enchainment that would have been expected to break the conjugation. A related copolymer, synthesized from 2,2',6,6'-tetramethylbiphenyl-based and unsubstituted biphenyl-based monomers, was microporous but not fluorescent.

Confined synthesis of conjugated microporous polymers for selective photocatalytic oxidation of amines

Photocatalytic oxidative coupling of amines is considered a mild, efficient, and sustainable strategy for the synthesis of imines. As a versatile organic semiconductor, conjugated microporous polymers (CMPs) are attractive in photocatalysis areas due to the diversity of their polymeric monomers. Herein, we report that in addition to the design of monomers, size-confined polymerization is also a feasible strategy to modulate the structure and photocatalysis properties of CMPs. We adopted dibromopyrazine as polymeric units to prepare pyrazine-involved hollow spherical CMPs (H-PyB) using a template method and successfully performed size-confined polymerization of hollow samples by resizing the templates. Interestingly, the small confinement space induced the formation of CMPs with better conjugate extensibility, resulting in enhanced conductivity, narrowed bandgaps, improved photoelectric performance, etc. As a result, small-sized H-PyB CMPs had superior activity for the photocatalytic oxidation of amines. Particularly, the smallest H-PyB CMPs that we designed in the present work exhibited excellent performance for the photocatalytic coupling oxidation of amines. When using benzylamine as a model substrate, the yield of the corresponding imine reached ∼ 113 mmol·g-1·h-1, accompanied by almost 100 % selectivity. Furthermore, the as-designed confined samples exhibited stable photocatalytic activity as well as good applicability for oxidative coupling of different amines. This work not merely reports a kind of CMP photocatalysts with excellent performance for the imine coupling oxidation but also proposes an alternative strategy for constructing high-performance organic photocatalysts by size-confined synthesis.

Microporous Matrimid/PIM-1 Thin Film Composite Membranes with Narrow Pore Size Distribution used for Molecular Separation in Organic Solvents

Polymers of intrinsic microporosity (PIMs) are a class of microporous organic materials that contain interconnected pores of less than 2 nm in diameter. Such materials are of great potential used in membranes for molecular separation, such as drug fractionation in pharmaceutical industry. However, the PIMs membranes are often susceptible to low separation selectivity toward different molecules due to their wide pore size distribution. Herein, a linear polyimide, Matrimid, is incorporated with PIM-1 (a typical member of PIMs) by solution blending, and the blends are dip-coated onto a polyimide P84 support membrane to prepare thin-film composite (TFC) membranes to control pore size distribution while keep high microporosity. The component miscibility, pore characteristics, and molecular separation performances of the Matrimid/PIM-1 TFC membranes are investigated in detail. The Matrimid and PIM-1 are partially miscible due to their similar Hansen solubility parameters. The Matrimid endows the selective layers (coatings) with narrower pore size distribution due to more compact chain packing. The prepared Matrimid/PIM-1 TFC membranes show high selectivity for separation of riboflavin (80% of retention) and isatin (only 5% of retention). The developed membranes exhibit great potential for separating molecules with different molecular weights.

Substituent Effects on the Ultraviolet Absorption Properties of 2,4-Dihydroxy Dibenzophenone

Substituent effects on the ultraviolet absorption properties of 2,4-dihydroxy dibenzophenone were investigated experimentally. Nine compounds of 2,4-dihydroxy dibenzophenone with different substituents were prepared by a solvent-free reaction of benzoyl chloride. The maximum absorption wavelength (λ_max) of these samples was measured, and their UV resistance properties in cotton fabric as well as in polyester were determined. The results show that the λ_max is dependent on the substituents at the benzylidene ring, and both electron donating substituents and electron withdrawing substituents cause a bathochromic shift. The UV resistance of fabric increases with the increase in compound concentration. The dyeing rate of each compound on polyester was higher than that of cotton. On cotton fabric, the dyeing rate of 2,4-dihydroxybenzophenone was the highest, 77.8%. On polyester, that of 2,4-dihydroxy-4'-ethyl dibenzophenone was the highest, 84.1%. The study provides new insights into the effect of substituents on the properties of 2,4-dihydroxy dibenzophenone that are related to the whitening of cotton and polyester materials.

Bifunctional conjugated microporous polymer based filters for highly efficient PM and gaseous iodine capture

Cross-linked conjugated microporous polymers (CMPs) based air filters obtained by a one-step cross-coupling reaction for effective capture of particulate matter and gaseous iodine from dusty air.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Easy Fabrication of Amorphous Covalent Organic Nanospheres Using Schiff-Base Chemistry for Iodine Capture

Designing a strategy for easy fabrication of amorphous porous organic polymers (POPs) with regularly nanospherical structure using common chemical raw materials is highly imperative to promote the practical application for iodine capture. Uniform covalent organic nanospheres (CONs), defined as CON-TT, were easily prepared at room temperature via a Schiff base condensation reaction of tri(4-aminophenyl) methane (TAPM) and terephthalaldehyde (TPA) catalyzed by acetic acid. The obtained CON-TT exhibits a uniform nanospherical shape, high specific surface area, effective imine sorption sites and abundant benzene rings. An excellent reversible iodine adsorption capacity of 4.80 g g^-1 is achieved, which can be attributed to the hybrid of physisorption and chemisorption process. We anticipate that this work can provide general guidance for the industrial large-scale preparation of other CONs for iodine capture.

Rational design of bifunctional conjugated microporous polymers

Conjugated microporous polymers (CMPs) are an emerging class of porous organic polymers that combine π-conjugated skeletons with permanent micropores. Since their first report in 2007, the enormous exploration of linkage types, building units, and synthetic methods for CMPs have facilitated their potential applications in various areas, from gas separations to energy storage. Owning to their unique construction, CMPs offer the opportunity for the precise design of conjugated skeletons and pore environment engineering, which allow the construction of functional porous materials at the molecular level. The capability to chemically alter CMPs to targeted applications allows for the fine adaptation of functionalities for the ever-changing environments and necessities. Bifunctional CMPs are a branch of functionalized CMPs that have caught the interest of researchers because of their inherent synergistic systems that can expand their applications and optimize their performance. This review discusses the rational design and synthesis of bifunctional CMPs and summarizes their advanced applications. To conclude, our own perspective on the research prospects of these types of materials is outlined.

Synthesis methods of microporous organic polymeric adsorbents: a review

MOPs can be synthesized in a large variety of ways, which affect their pores and surface area. Variation in synthesis and porosity has a significant effect on their adsorption properties.

Aggregation-Induced Enhanced Emission (AIEE)-Active Conjugated Mesoporous Oligomers (CMOs) with Improved Quantum Yield and Low-Cost Detection of a Trace Amount of Nitroaromatic Explosives

The article reports a straightforward strategy for the design and synthesis of highly luminescent conjugated mesoporous oligomers (CMOs) with an "aggregation-induced enhanced emission" (AIEE) feature through Wittig polymerization of a molecular rotor. Typical molecular rotors such as triphenylamine (TPA) and tetraphenylethene (TPE) as B2-, and A4- and A3-type nodes have been used to construct AIEE-active CMOs, namely, CMO1 and CMO2. The quick dissipation of the excited photons is successfully controlled by the restriction of rotation of the phenyl units through the formation of a mesoporous network scaffold in a solid/thin film, which provides high quantum yields for the interlocked CMO system. Both the CMOs are sensitive and selective to the various nitroaromatic explosives, whereas CMO1 is more sensitive (K_sv = 2.6 × 10⁶ M^-1) toward picric acid. The increased quenching constant for CMO1 is due to its increased quantum yield and high energy-transfer efficiency. The mechanism for sensing has been studied in detail. The larger pore size and pore density in the mesoporous network of CMO1 are found to be responsible for the greater extent of energy transfer from CMO1 to picric acid. Furthermore, CMO1 has been employed for low-cost filter-paper-based detection of a trace amount of nitroaromatic explosive materials.

Porous Organic Polymer-Derived Fe2P@N,P-Codoped Porous Carbon as Efficient Electrocatalysts for pH Universal ORR

A new porous organic polymer (CP-CMP) was designed and synthesized via the direct polymerization of pyrrole and hexakis(4-formyl-phenoxy)cyclotriphosphazene, skipping the tedious synthetic procedure of porphyrin-monomers containing special groups. This special porous organic polymer (POP) serves as an "all in one" precursor for C, N, P, and Fe. Direct carbonization of this special POP afforded Fe2P@N,P-codoped porous carbons with hierarchical pore structure and high graphitization. Finally, the optimal catalyst (CP-CMP-900) prepared by carbonization of CP-CMP at 900 °C exhibited high efficiency for oxygen electroreduction. Typically, CP-CMP-900 presented an oxygen reduction reaction half-wave potential (E 1/2) of 0.85, 0.73, and 0.65 V, respectively, in alkaline, neutral, and acidic media, close to those of commercial Pt/C in the same electrolyte (0.843, 0.71, and 0.74 V). Furthermore, it also displayed excellent methanol immunity and long-time stability in various electrolytes better than commercial Pt/C (20%).

Advances in Conjugated Microporous Polymers

Conjugated microporous polymers (CMPs) are a unique class of materials that combine extended π-conjugation with a permanently microporous skeleton. Since their discovery in 2007, CMPs have become established as an important subclass of porous materials. A wide range of synthetic building blocks and network-forming reactions offers an enormous variety of CMPs with different properties and structures. This has allowed CMPs to be developed for gas adsorption and separations, chemical adsorption and encapsulation, heterogeneous catalysis, photoredox catalysis, light emittance, sensing, energy storage, biological applications, and solar fuels production. Here we review the progress of CMP research since its beginnings and offer an outlook for where these materials might be headed in the future. We also compare the prospect for CMPs against the growing range of conjugated crystalline covalent organic frameworks (COFs).

Conjugated porous polymers: incredibly versatile materials with far-reaching applications

This review discusses conjugated porous polymers and focuses on relating design principles and synthetic methods to key properties and applications such as (photo)catalysis, gas storage, chemical sensing, energy storage and environmental remediation.

Covalent Organic Frameworks: Chemical Approaches to Designer Structures and Built-In Functions

A new approach has been developed to design organic polymers using topology diagrams. This strategy enables covalent integration of organic units into ordered topologies and creates a new polymer form, that is, covalent organic frameworks. This is a breakthrough in chemistry because it sets a molecular platform for synthesizing polymers with predesignable primary and high-order structures, which has been a central aim for over a century but unattainable with traditional design principles. This new field has its own features that are distinct from conventional polymers. This Review summarizes the fundamentals as well as major progress by focusing on the chemistry used to design structures, including the principles, synthetic strategies, and control methods. We scrutinize built-in functions that are specific to the structures by revealing various interplays and mechanisms involved in the expression of function. We propose major fundamental issues to be addressed in chemistry as well as future directions from physics, materials, and application perspectives.

Substituent effects on the ultraviolet absorption properties of stilbene compounds-Models for molecular cores of absorbents

The effects of substituent X and Y on ultraviolet (UV) absorption properties of stilbene compounds XPhCHCHPhY (XSBY) were studied both experimentally and computationally from the viewpoint of UV maximum absorption wavelength (λ_max) and the corresponding energy (υ_max). In the studies, the contribution of substituents on υ_max shift was explored. The results show that with increase of electron withdrawing or electron donating ability of X or Y, there is an enhanced electron delocalization of XSBY that leads to bathochromic shift. Computational analyses based on density functional theory were conducted to elucidate the phenomena. It is disclosed that the υ_max values are significantly affected by the excited state, though the electronic effect of ground state cannot be ignored. Finally, on the basis of the respective influences of X and Y, a quantitative model, which was proved reliable by the leave-one-out method, was developed to scale the effects of terminal substituents on υ_max. According to the model, the effects of substituents X or Y exhibit almost the same action on υ_max owing to the symmetric skeleton of the XSBY compounds. The findings provide deep insight into the effects of terminal substituents on UV absorption properties of stilbene compounds, and the derived model enables practical expression of the relationship between substituents and UV absorption.

Microporous polymer based on the new compound "bi-(4-vinyl phenylquinoline) amide" for enrichment and quantitative determination of lamotrigine in rat and human serum

Lamotrigine is one of the most widely used antiepileptic drugs in the treatment of epilepsy. This kind of drug needs to be used in the long term and should be quantitatively detected in the blood of patients to avoid drug toxicity caused by individual differences and environmental and pathological changes in the process of taking. The detection of antiepileptic drugs in human blood is challenging because of their low contents and the interference of complex matrices. Thus, the sample enrichment method has been commonly used to improve the sensitivity of detection. In this work, we have synthesized a new "bi-(4-vinyl phenylquinoline) amide" compound and used it as the monomer to produce the hyper-cross-linked microporous polymer for the enrichment of lamotrigine. This material has a high adsorption capacity, specificity, and linearity, which can improve the detection sensitivity of lamotrigine by high-performance liquid chromatography (HPLC). The mechanism of this phenomenon has also been investigated. Finally, we have developed the microporous polymer enrichment coupled with HPLC method for the quantitative determination of lamotrigine in rat and human serum samples. This method has excellent precision, accuracy, and recovery, meeting the test of biological sample. The low limit of quantitation was 0.625 μg/mL. Graphical abstract.

Subphthalocyanine-based conjugated porous polymers for efficient singlet oxygen generation

Subphthalocyanine-based conjugated porous polymers can efficiently absorb long-wavelength photons to generate singlet oxygen rapidly.

Facile preparation of a cationic COF functionalized magnetic nanoparticle and its use for the determination of nine hydroxylated polycyclic aromatic hydrocarbons in smokers’ urine

A novel cationic-COF coated double-shell magnetic sorbent, possessing excellent dispersive capability, high stability, and desirable absorption affinity, was prepared.

Variations in Surface Morphologies, Properties, and Electrochemical Responses to Nitro-Analyte by Controlled Electropolymerization of Thiophene Derivatives

Herein, we reported the fabrication of conjugated microporous polymer (CMP) films based on three thiophene derivatives using a one-step templateless electropolymerization in dichloromethane without any surfactants. The formation of hydrophilic or hydrophobic films with specific morphology is a comprehensive result of the polymerization sites in each monomer, the polymerization rate, and the gas bubble produced in situ during the polymerization process, which can be easily controlled by the experimental conditions, such as electropolymerization method, electrolyte, and "trace water" existed in the organic solvent. Moreover, the electrochemical reduction of metronidazole as a prototypical nitro-analyte at CMP-modified glassy carbon (GC) electrode shows remarkably increased current response compared to nonmodified GC electrode. The process is demonstrated to be typical adsorption-controlled, and the hydrophobic surface of the electrode coating film is more favorable to the absorption and thus reduction of metronidazole. This work provides a new perspective and a breakthrough point for the application of CMPs in the electrochemical sensors.

A Robust 3D Cage-like Ultramicroporous Network Structure with High Gas-Uptake Capacity

A three-dimensional (3D) cage-like organic network (3D-CON) structure synthesized by the straightforward condensation of building blocks designed with gas adsorption properties is presented. The 3D-CON can be prepared using an easy but powerful route, which is essential for commercial scale-up. The resulting fused aromatic 3D-CON exhibited a high Brunauer-Emmett-Teller (BET) specific surface area of up to 2247 m²  g^-1 . More importantly, the 3D-CON displayed outstanding low pressure hydrogen (H₂ , 2.64 wt %, 1.0 bar and 77 K), methane (CH₄ , 2.4 wt %, 1.0 bar and 273 K), and carbon dioxide (CO₂ , 26.7 wt %, 1.0 bar and 273 K) uptake with a high isosteric heat of adsorption (H₂ , 8.10 kJ mol^-1 ; CH₄ , 18.72 kJ mol^-1 ; CO₂ , 31.87 kJ mol^-1 ). These values are among the best reported for organic networks with high thermal stability (ca. 600 °C).

Heteropore covalent organic frameworks: a new class of porous organic polymers with well-ordered hierarchical porosities

This review highlights the development of heteropore covalent organic frameworks, a new class of porous organic polymers which exhibit well-ordered heterogeneous/hierarchical porosities.

Conjugated Microporous Polymer Nanosheets for Overall Water Splitting Using Visible Light

Direct water splitting into H₂ and O₂ using photocatalysts by harnessing sunlight is very appealing to produce storable chemical fuels. Conjugated polymers, which have tunable molecular structures and optoelectronic properties, are promising alternatives to inorganic semiconductors for water splitting. Unfortunately, conjugated polymers that are able to efficiently split pure water under visible light (400 nm) via a four-electron pathway have not been previously reported. This study demonstrates that 1,3-diyne-linked conjugated microporous polymer nanosheets (CMPNs) prepared by oxidative coupling of terminal alkynes such as 1,3,5-tris-(4-ethynylphenyl)-benzene (TEPB) and 1,3,5-triethynylbenzene (TEB) can act as highly efficient photocatalysts for splitting pure water (pH ≈ 7) into stoichiometric amounts of H₂ and O₂ under visible light. The apparent quantum efficiencies at 420 nm are 10.3% and 7.6% for CMPNs synthesized from TEPB and TEB, respectively; the measured solar-to-hydrogen conversion efficiency using the full solar spectrum can reach 0.6%, surpassing photosynthetic plants in converting solar energy to biomass (globally average ≈0.10%). First-principles calculations reveal that photocatalytic H₂ and O₂ evolution reactions are energetically feasible for CMPNs under visible light irradiation. The findings suggest that organic polymers hold great potential for stable and scalable solar-fuel generation.

Trends and challenges for microporous polymers

Recent trends and challenges for the emerging materials class of microporous polymers are reviewed. See the main article for graphical abstract image credits.