Rheological and morphological characteristics of multicomponent polysulfone/poly(vinyl alcohol) systems

Structure-Bioactivity Relationship of the Functionalized Polysulfone with Triethylphosphonium Pendant Groups: Perspective for Biomedical Applications

Development of new biomaterials based on polysulfones tailored to act in various biomedical fields represents a promising strategy which provides an opportunity for enhancing the diagnosis, prevention, and treatment of specific illnesses. To meet these requirements, structural modification of the polysulfones is essential. In this context, for design of new materials with long-term stability, enhanced workability, compatibility with biological materials and good antimicrobial activity, the functionalization of chloromethylated polysulfones with triethylphosphonium pendant groups (PSFEtP+) was adopted. The surface chemistry analysis (Fourier transform infrared spectroscopy (FTIR), Energy-dispersive X-ray spectroscopy (EDX)), rheological properties, morphological aspects (Scanning electron microscopy (SEM), polarized light microscopy (POM)), and antimicrobial activity of the synthetized polysulfone were investigated to establish the relationship between its structure and properties, as an important indicator for targeted applications. Based on the obtained features, evaluated by the relationship between the rheological properties and microstructural aspects, and also the response at the biomaterial-bacteria interface, these qualities have been confirmed in their performance, in terms of thermal stability, antimicrobial activity, and also an increase in lifetime. Consequently, derived results constitute the preliminary basis for future tests concerning their functionality as gel matrices in biomedical devices.

Green Blends Based on Ionic Liquids with Improved Performance for Membrane Technology: Perspectives for Environmental Applications

Present research was directed towards the development of new high-performance and cost-effective polysulfone membranes (PSFQ) by introducing ionic liquids (ILs—Cyphos 101 IL and Aliquat 336) into their matrix. Variation of ILs was performed with the aim to find the one that brings new properties and improves the functionality and selectivity of PSFQ membranes in ultrafiltration processes. Based on the obtained results of the rheological study, we established the compatibility of compounds and optimal content of the used ILs, namely 3 wt% and 15 wt% Cyphos 101 IL and compositions varying between 3 and 15 wt % Aliquat 336. Results indicated that the ILs acted as plasticizers when they were added to the system, a helpful aspect in processing membranes used in water decontamination. The efficiency and performance of the membranes were evaluated by their use in the treatment of diclofenac (DCF)-containing waters. Membranes obtained from PSFQ/Aliquat 336 solution containing 15 wt% IL exhibited a 97% removal degree of DCF in the treatment process of 50 mL solution containing 3 mg/L DCF. The separation efficiency was kept constant for four filtration/cleaning cycles. The results indicated an improvement in membrane performance as the amount of IL in their structure increased, which confirms the potential for application in water treatment processes.

Crown Ether-Immobilized Cellulose Acetate Membranes for the Retention of Gd (III)

This study presents a new, revolutionary, and easy method of separating Gd (III). For this purpose, a cellulose acetate membrane surface was modified in three steps, as follows: firstly, with aminopropyl triethoxysylene; then with glutaraldehyde; and at the end, by immobilization of crown ethers. The obtained membranes were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), through which the synthesis of membranes with Gd (III) separation properties is demonstrated. In addition, for the Gd (III) separating process, a gadolinium nitrate solution, with applications of moderator poison in nuclear reactors, was used. The membranes retention performance has been demonstrated by inductively coupled plasma mass spectrometry (ICP-MS), showing a separation efficiency of up to 91%, compared with the initial feed solution.

New perspectives on development of polysulfones/cellulose derivatives based ionic-exchange membranes: Dielectric response and hemocompatibility study

Due to the increasing need from the membrane technologies for diverse applications, development of new generation of materials with electroactive properties and significant impact on the future technological systems was imposed. An innovative way of designing the membrane materials with long-term stable hydrophilicity, enhanced workability, porosity, and good biocompatibility, has been adopted by blending of quaternized polysulfone (PSFQ) with a cellulose derivative (cellulose acetate phthalate, CAP). Moreover, the quaternization effect has significantly improved the electrical performances, in terms of the ionic conductivity, electron interactions, and dielectric properties, required by target applications, i.e., ionic-exchange membranes, IEMs. Results derived from dielectric spectroscopy confirm the enhanced dielectric quality, reflected by a low dielectric constant and dielectric loss at high frequency. Additionally, the relationship between the resulted dielectric properties and response at the blood-biomaterial interface, have confirmed their excellent performance, constituting the preliminary basis for future tests concerning their functionality as IEMs in hemodialysis.

Polishing Step Purification of High-Strength Wastewaters by Nanofiltration and Reverse Osmosis

This article reports findings on the use of nanofiltration (NF) and reverse osmosis (RO) for secondary treatment of high-strength rendering facility wastewaters following an ultrafiltration step. These wastewaters present significant challenges to classical treatment technologies. Constant-pressure, direct-flow membrane filtration experiments were done to screen for flux and effluent water permeate quality of ten commercial NF and RO membranes. All membranes tested were effective in reducing total dissolved salts (TDS) and chemical oxygen demand (COD); however, only two membranes (Koch MPF-34 and Toray 70UB) gave sufficiently stable flux values to warrant longer term cross-flow filtration studies. Cross-flow flux measurements, scanning electron microscopy (SEM), X-ray dispersive spectroscopy (EDS), and attenuated total reflectance-Fourier-transform infrared spectroscopy (ATR-FTIR) indicated that both membranes were eventually fouled by organic and inorganic foulants; however, the Toray 70UB RO membrane yielded a capacity of 1600 L/m² prior to cleaning. A preliminary economic analysis compared the estimated costs of energy and consumables for a dual-stage UF/RO membrane process and dissolved air floatation (DAF) and found membrane process costs could be less than about 40% of the current DAF process.

Establishing proper scanning conditions in atomic force microscopy on polyimide and polyurethane samples and their effect on 3D surface texture parameters

Several atomic force microscopy (AFM) tests have been carried out on both smooth (polyimide) and rough (polyurethane) surfaces so that to obtain the best results; subsequently, the optimization of experiments performed is presented. A special emphasis has been put on the effect of tip geometry, image pre-processing procedure, scanning area, resolution, pixel size, and cantilever oscillation amplitude in tapping mode, as well as on the quality of the topographical images and 3D surface texture parameters. After viewing the scanning tip and finding out its sharpness, degradation, and contamination, a simultaneous calibration in X, Y, and Z directions, lateral calibration of SPM scanners and detection of lateral non-linearity, hysteresis, creep, and cross-coupling effects has been made. We have established the following experimental parameters: proper scanning resolution (512 × 512 pixels), adequate pixel size (between 2.9 and 19.5 nm) and suitable intermittent contact region (moderate tapping) for which the AFM images present good contrast and resolution. Using these parameters, the values of 3D texture parameters remain constant. These kinds of measurements are extremely important to conduct further AFM experiments on polyimide and polyurethane surfaces under optimal conditions, thus avoiding unwanted artifacts on the morphological images or unrealistic values for the 3D surface texture parameters that might occur.