Enzymatically catalyzed furan-based copolyesters containing dilinoleic diol as a building block

A more environmentally friendly method for creating sustainable alternatives to traditional aromatic-aliphatic polyesters is a valuable step towards resource-efficiency optimization. A library of furan-based block copolymers was synthesized via temperature-varied two-step polycondensation reaction in diphenyl ether using Candida antarctica lipase B (CAL-B) as a biocatalyst where dimethyl 2,5-furandicarboxylate (DMFDCA), α,ω-aliphatic linear diols (α,ω-ALD), and bio-based dilinoleic diol (DLD) were used as the starting materials. Nuclear magnetic spectroscopy (¹H and ¹³C NMR), Fourier transform spectroscopy (FTIR) and size exclusion chromatography (SEC) were used to analyze the resulting copolymers. Additionally, crystallization behavior and thermal properties were studied using X-ray diffraction (XRD), digital holographic microscopy (DHM), and differential scanning microscopy (DSC). Finally, oxygen transmission rates (OTR) and dynamic mechanical analysis (DMTA) of furan-based copolyesters indicated their potential for medical packaging.

Enzymatic Catalysis in Favor of Blocky Structure and Higher Crystallinity of Poly(Butylene Succinate)-Co-(Dilinoleic Succinate) (PBS-DLS) Copolymers of Variable Segmental Composition

To systematically investigate the synthesis of poly(butylene succinate)-co-(dilinoleic succinate) (PBS-DLS) copolymers and to enrich the library of polyesters synthesized via a sustainable route, we conducted a two-step polycondensation using fully biobased monomers such as diethyl succinate (DS), 1,4-butanediol (1,4-BD) and dilinoleic diol (DLD) in diphenyl ether, using Candida Antarctica lipase B (CAL-B) as biocatalyst. A series of PBS-DLS copolyesters with a 90-10, 70-30 and 50-50 wt% of hard (PBS) to soft (DLS) segments ratio were compared to their counterparts, which were synthesized using heterogenous titanium dioxide/silicon dioxide (TiO₂/SiO₂) catalyst. Chemical structure and molecular characteristics of resulting copolymers were assessed using nuclear magnetic spectroscopy (¹H- and ¹³C-NMR) and gel permeation chromatography (GPC), whereas thermal and thermomechanical properties as well as crystallization behavior were investigated by differential scanning microscopy (DSC), dynamic mechanical thermal analysis (DMTA), digital holographic microscopy (DHM) and X-ray diffraction (XRD). The obtained results showed that, depending on the type of catalyst, we can control parameters related to blockiness and crystallinity of copolymers. Materials synthesized using CAL-B catalysts possess more blocky segmental distribution and higher crystallinity in contrast to materials synthesized using heterogenous catalysts, as revealed by DSC, XRD and DHM measurements.

Polybutylene Succinate, A potential bio-degradable polymer: Synthesis, copolymerization And Bio-degradation

Poly(butylene succinate) is one of the emerging bio-degradable polymer, which has huge potential to be employed in a wide range of applications. Further, it is also recognized as one of...

Enzymatic Synthesis of Polyesters and Their Bioapplications: Recent Advances and Perspectives

This article reviews the most important advances in the enzymatic synthesis of polyesters. In first place, the different processes of polyester enzymatic synthesis, i.e., polycondensation, ring opening, and chemoenzymatic polymerizations, and the key parameters affecting these reactions, such as enzyme, concentration, solvent, or temperature, are analyzed. Then, the latest articles on the preparation of polyesters either by direct synthesis or via modification are commented. Finally, the main bioapplications of enzymatically obtained polyesters, i.e., antimicrobial, drug delivery, or tissue engineering, are described. It is intended to point out the great advantages that enzymatic polymerization present to obtain polymers and the disadvantages found to develop applied materials.

Prospects of Using Biocatalysis for the Synthesis and Modification of Polymers

Trends in the dynamically developing application of biocatalysis for the synthesis and modification of polymers over the past 5 years are considered, with an emphasis on the production of biodegradable, biocompatible and functional polymeric materials oriented to medical applications. The possibilities of using enzymes not only as catalysts for polymerization but also for the preparation of monomers for polymerization or oligomers for block copolymerization are considered. Special attention is paid to the prospects and existing limitations of biocatalytic production of new synthetic biopolymers based on natural compounds and monomers from biomass, which can lead to a huge variety of functional biomaterials. The existing experience and perspectives for the integration of bio- and chemocatalysis in this area are discussed.

Enzymatic Synthesis of Poly(alkylene succinate)s: Influence of Reaction Conditions

Application of lipases (preferentially Candida antarctica Lipase B, CALB) for melt polycondensation of aliphatic polyesters by transesterification of activated dicarboxylic acids with diols allows to displace toxic metal and metal oxide catalysts. Immobilization of the enzyme enhances the activity and the temperature range of use. The possibility to use enzyme-catalyzed polycondensation in melt is studied and compared to results of polycondensations in solution. The experiments show that CALB successfully catalyzes polycondensation of both, divinyladipate and dimethylsuccinate, respectively, with 1,4-butanediol. NMR spectroscopy, relative molar masses obtained by size exclusion chromatography, MALDI-TOF MS and wide-angle X-ray scattering are employed to compare the influence of synthesis conditions for poly(butylene adipate) (PBA) and poly(butylene succinate) (PBS). It is shown that the enzymatic activity of immobilized CALB deviates and influences the molar mass. CALB-catalyzed polycondensation of PBA in solution for 24 h at 70 °C achieves molar masses of up to Mw~60,000 g/mol, higher than reported previously and comparable to conventional PBA, while melt polycondensation resulted in a moderate decrease of molar mass to Mw~31,000. Enzymatically catalyzed melt polycondensation of PBS yields Mw~23,400 g/mol vs. Mw~40,000 g/mol with titanium(IV)n-butoxide. Melt polycondensation with enzyme catalysis allows to reduce the reaction time from days to 3–4 h.

Molecular Decoration of Ceramic Supports for Highly Effective Enzyme Immobilization-Material Approach

A highly effective method was developed to functionalize ceramic supports (Al₂O₃ powders and membranes) using newly synthesized spacer molecules. The functionalized materials were subsequently utilized for Candida antarctica lipase B enzyme immobilization. The objective is to systematically evaluate the impact of various spacer molecules grafted onto the alumina materials will affect both the immobilization of the enzymes and specific material surface properties, critical to enzymatic reactors performance. The enzyme loading was significantly improved for the supports modified with shorter spacer molecules, which possessed higher grafting effectiveness on the order of 90%. The specific enzyme activity was found to be much higher for samples functionalized with longer modifiers yielding excellent enantioselectivity >97%. However, the enantiomeric ratio of the immobilized lipase was slightly lower in the case of shorter spacer molecules.