Synthesis and properties of biomimetic poly(L-glutamate)-b-poly(2-acryloyloxyethyllactoside)-b-poly(L-glutamate) triblock copolymers

Degradable Glycopolyester-like Nanoparticles by Radical Ring-Opening Polymerization

A small library of degradable polyester-like glycopolymers was successfully prepared by the combination of radical ring-opening copolymerization of 2-methylene-1,3-dioxepane as a cyclic ketene acetal (CKA) with vinyl ether (VE) derivatives and a Pd-catalyzed thioglycoconjugation. The resulting thioglycopolymers were formulated into self-stabilized thioglyconanoparticles, which were stable up to 4 months and were enzymatically degraded. Nanoparticles and their degradation products exhibited a good cytocompatibility on two healthy cell lines. Interactions between thioglyconanoparticles and lectins were investigated and highlighted the presence of both specific carbohydrate/lectin interactions and nonspecific hydrophobic interactions. Fluorescent thioglyconanoparticles were also prepared either by encapsulation of Nile red or by the functionalization of the polymer backbone with rhodamine B. Such nanoparticles were used to prove the cell internalization of the thioglyconanoparticles by lung adenocarcinoma (A549) cells, which underlined the great potential of P(CKA-co-VE) copolymers for biomedical applications.

Biocompatible Nanoparticles Based on Amphiphilic Random Polypeptides and Glycopolymers as Drug Delivery Systems

In this research, the development and investigation of novel nanoobjects based on biodegradable random polypeptides and synthetic non-degradable glycopolymer poly(2-deoxy-2-methacrylamido-d-glucose) were proposed as drug delivery systems. Two different approaches have been applied for preparation of such nanomaterials. The first one includes the synthesis of block-random copolymers consisting of polypeptide and glycopolymer and capable of self-assembly into polymer particles. The synthesis of copolymers was performed using sequential reversible addition-fragmentation chain transfer (RAFT) and ring-opening polymerization (ROP) techniques. Amphiphilic poly(2-deoxy-2-methacrylamido-d-glucose)-b-poly(l-lysine-co-l-phenylalanine) (PMAG-b-P(Lys-co-Phe)) copolymers were then used for preparation of self-assembled nanoparticles. Another approach for the formation of polypeptide-glycopolymer particles was based on the post-modification of preformed polypeptide particles with an oxidized glycopolymer. The conjugation of the polysaccharide on the surface of the particles was achieved by the interaction of the aldehyde groups of the oxidized glycopolymer with the amino groups of the polymer on particle surface, followed by the reduction of the formed Schiff base with sodium borohydride. A comparative study of polymer nanoparticles developed with its cationic analogues based on random P(Lys-co-d-Phe), as well as an anionic one—P(Lys-co-d-Phe) covered with heparin––was carried out. In vitro antitumor activity of novel paclitaxel-loaded PMAG-b-P(Lys-co-Phe)-based particles towards A549 (human lung carcinoma) and MCF-7 (human breast adenocarcinoma) cells was comparable to the commercially available Paclitaxel-LANS.

Bio-Inspired Amphiphilic Block-Copolymers Based on Synthetic Glycopolymer and Poly(Amino Acid) as Potential Drug Delivery Systems

In this work, a method to prepare hybrid amphiphilic block copolymers consisting of biocompatible synthetic glycopolymer with non-degradable backbone and biodegradable poly(amino acid) (PAA) was developed. The glycopolymer, poly(2-deoxy-2-methacrylamido-D-glucose) (PMAG), was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Two methods for modifying the terminal dithiobenzoate-group of PMAG was investigated to obtain the macroinitiator bearing a primary aliphatic amino group, which is required for ring-opening polymerization of N-carboxyanhydrides of hydrophobic α-amino acids. The synthesized amphiphilic block copolymers were carefully analyzed using a set of different physico-chemical methods to establish their composition and molecular weight. The developed amphiphilic copolymers tended to self-assemble in nanoparticles of different morphology that depended on the nature of the hydrophobic amino acid present in the copolymer. The hydrodynamic diameter, morphology, and cytotoxicity of polymer particles based on PMAG-b-PAA were evaluated using dynamic light scattering (DLS) and transmission electron microscopy (TEM), as well as CellTiter-Blue (CTB) assay, respectively. The redox-responsive properties of nanoparticles were evaluated in the presence of glutathione taken at different concentrations. Moreover, the encapsulation of paclitaxel into PMAG-b-PAA particles and their cytotoxicity on human lung carcinoma cells (A549) and human breast adenocarcinoma cells (MCF-7) were studied.

Substituted Polyesters by Thiol-Ene Modification: Rapid Diversification for Therapeutic Protein Stabilization

Many proteins, especially those used as therapeutics, are unstable to storage and shipping temperatures, leading to increased costs in research and industry. Therefore, the design and synthesis of novel stabilizers is an important area of investigation. Herein we report new degradable polymers that stabilize proteins to environmental stressors such as refrigeration and elevated temperature. Specifically, polycaprolactones with different pendant groups were synthesized and surveyed for their ability to stabilize an important therapeutic protein to storage and shipping conditions. Ring-opening polymerization (ROP) of an allyl-substituted caprolactone monomer was carried out using the organocatalyst 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) to yield a well-defined, alkene-substituted degradable polymer, which was used as a common backbone to control for the degree of polymerization. Relevant side chains such as trehalose, lactose, glucose, carboxybetaine, and oligo(ethylene glycol) were installed via postpolymerization thiol-ene reactions. These degradable polymers were then employed as excipients for the stabilization of the therapeutic protein granulocyte colony-stimulating factor (G-CSF) against storage at 4 °C and shipping temperatures of 60 °C. The best stabilization was observed using the trehalose- and zwitterion- substituted polyesters. Both the trehalose- and carboxybetaine-substituted pCL were further investigated with regard to molecular weight dependence, and it was found that the molecular weight was minimally important for stabilization to refrigeration, but critical for G-CSF stabilization at elevated temperatures. Both high performing zwitterionic and trehalose polyesters were also degraded, and the polymers and degradation products were shown to be noncytotoxic. This work provides potential biocompatible polymers for stabilization of the important therapeutic G-CSF, as well as a general platform for the future discovery of new polymeric protein stabilizers.

Photosensitizer–AgNP composite with an ability to selectively recognize pathogen and enhanced photodynamic efficiency

A photosensitizer–AgNP composite could recognise bacteria smartly and showed greater photodynamic efficiency than did the free photosensitizer.

An Acid-Triggered Degradable and Fluorescent Nanoscale Drug Delivery System with Enhanced Cytotoxicity to Cancer Cells

To reduce side-effects of anticancer drugs, development of nanocarriers with precise biological functions is a critical requirement. In this study, the multifunctional nanoparticles combining imaging and therapy for tumor-targeted delivery of hydrophobic anticancer drugs were prepared via self-assembly of amphiphilic copolymers obtained using RAFT polymerization, specifically, acid-labile ortho ester and galactose. First, boron-dipyrromethene dye-conjugated chain transfer agent provides fluorescent imaging capability for diagnostic application. Second, nanoparticles were stable under physiological conditions but degraded in acidic tumor microenvironment, leading to enhanced anticancer efficacy. Third, the application of biocompatible glycopolymers efficiently increased the target-to-background ratio through carbohydrate-protein interactions. Data from cell viability, cellular internalization, flow cytometry, biodistribution and anticancer efficacy tests showed that the drug-loaded nanoparticles were capable of inhibiting cancer cell proliferation with significantly enhanced capacity. Our newly developed multifunctional nanoparticles may thus facilitate the development of effective drug delivery systems for application in diagnosis and therapy of cancer.

Glycosylation of polyphosphazenes by thiol-yne click chemistry for lectin recognition

Strong carbohydrate–lectin binding interactions in biological systems can be mimicked through the synthesis of glucose containing macromolecules, particularly glycosylated polymers.

BODIPY-based macromolecular photosensitizer with cation-enhanced antibacterial activity

The macromolecular photosensitizer could bind and eliminate bacteria efficiently.

Glycopolymer code based on well-defined glycopolymers or glyconanomaterials and their biomolecular recognition

Advances in the glycopolymer technology have allowed the preparation of more complex and well-defined glycopolymers/particles with several architectures from linear to globular structures (such as micelles, dendrimers, and nanogels). In the last decade, functionalized self-assembled/decided nano-objects and scaffolds containing glycopolymers were designed to develop many biological and biomedical applications in diseases treatments such as pathogen detection, inhibitors of toxins, and lectin-based biosensors. These studies will facilitate the understanding and investigation of the sugar code on the carbohydrate-lectin interactions, which are significantly influenced by the glycopolymer architecture, valency, size, and density of binding elements. In this context, these advanced and selected glycopolymers/particles showing specific interactions with various lectins are highlighted.

pH- and glucose-sensitive glycopolymer nanoparticles based on phenylboronic acid for triggered release of insulin

Amphiphilic poly(acrylic acid-co-acrylamidophenylboronic acid)-block-poly(2-acryloxyethyl galactose)-block-poly(acrylic acid-co-acrylamidophenylboronic acid) (((PAA-co-PAAPBA)-b-)₂PAEG) copolymer was fabricated: The poly(2-acryloyloxyethyl pentaacetylgalactoside) (PAEAcG) with narrow molecular weight distributions (Mw/Mn≤1.22) was prepared by atom transfer radical polymerization (ATRP) using dibromo-p-xylene (DBX) as initiator. Then the well-defined triblock copolymer poly(t-butyl acrylate)-b-poly(2-acryloyloxyethyl pentaacetylgalactoside)-b-poly(t-butyl acrylate) (PtBA-b-PAEAcG-b-PtBA) was synthesized by ATRP of tBA using PAEAcG homopolymer with dibromo end groups as macroinitiator. After hydrolysis of t-butyl acrylate block, amide linkage and deacetylation, the final copolymer ((PAA-co-PAAPBA)-b-)₂PAEG was obtained. Because of characteristics of three different segments, amphiphilic ((PAA-co-PAAPBA)-b-)₂PAEG can self-assemble into pH- and glucose-responsive nanoparticles studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Furthermore, the in vitro release profiles of insulin also revealed obvious pH- and glucose-sensitivity of the nanoparticles. The analysis of cell viability suggested that the copolymer nanoparticles had good cytocompatibility.

Bioinspired functional block copolymers

The diversity and complexity of structures and functions in synthetic polymer systems can be increased through conjugation with biological segments or, in other words, through generation of "polymer-bioconjugates" or "macromolecular chimeras". The present contribution highlights major synthetic approaches toward sophisticated functional hybrid block copolymers and analyses of structure-function relationships.

Applications of biomimetic systems in drug delivery

This review article highlights recent activities in the field of biomimetic systems and their application in controlled drug delivery. A definition and overview of biomimetic processes is given, with a focus on synthesis and assembly for the creation of novel biomaterials. In particular, systems are classified on the basis of three subsets, which include biological, biohybrid and synthetic structures. Examples focus on the current and proposed clinical significance for systems that mimic processes where the underlying molecular principles are well understood. Biomimetic materials and systems are presented as exceptional candidates for various controlled drug delivery applications and have enormous potential in medicine for the treatment of disease.