Syntheses, characterization, and functionalization of poly(ester amide)s with pendant amine functional groups

Arginine-based poly(ester amide) nanoparticle platform: From structure-property relationship to nucleic acid delivery

Many different types of polycations have been vigorously studied for nucleic acid delivery, but a systematical investigation of the structure-property relationships of polycations for nucleic acid delivery is still lacking. In this study, a new library of biodegradable and biocompatible arginine-based poly(ester amide) (Arg-PEA) biomaterials was designed and synthesized with a tunable structure for such a comprehensive structure-property research. Nanoparticle (NP) complexes were formed through the electrostatic interactions between the polycationic Arg-PEAs and anionic nucleic acids. The following structure effects of the Arg-PEAs on the transfection efficiency of nucleic acids were investigated: 1) the linker/spacer length (length effect and odd-even effect); 2) salt type of arginine; 3) the side chain; 4) chain stiffness; 5) molecular weight (MW). The data obtained revealed that a slight change in the Arg-PEA structure could finely tune its physicochemical property such as hydrophobicity, and this could subsequently affect the nanoparticle size and zeta potential, which, in turn, regulate the transfection efficiency and silencing outcomes. A further study of the Arg-PEA/CpG oligodeoxynucleotide NP complexes indicated that the polymer structure could precisily regulate the immune response of CpG, thus providing a new potential nano-immunotherapy strategy. The in vitro data have further confirmed that the Arg-PEA NPs showed a satisfactory delivery performance for a variety of nucleic acids. Therefore, the data from the current study provide comprehensive information about the Arg-PEA structure-transfection property relationship; the tunable property of the library of Arg-PEA biomaterials can be one of the promising candidates for nucleic acid delivery and other biomedical applications.

STATEMENT OF SIGNIFICANCE

Polycations have being intensive utilized for nucleic acid delivery. However, there has not been elucidated about the relationship between polycation's structure and the physicochemical properties/biological function. In this timely report, an arginine based poly(ester amide) (Arg-PEA) library was prepared with finely tunable structure to systematically investigate the structure-property relationships of polycations for nucleic acid delivery. The results revealed that slight change of Arg-PEA structure could finely tune the physicochemical property (such as hydrophobicity), which subsequently affect the size and zeta potential of Arg-PEA/nucleic acid nanoparticles(NPs), and finally regulate the resulting transfection or silencing outcomes. Further study of Arg-PEA/CpG NPs indicated that the polymer structure could precisely regulate immuno response of CpG, providing new potential nano-immunotherapy strategy. In vitro evaluations confirmed that the NPs showed satisfied delivery performance for a variety types of nucleic acids. Therefore, these studies provide comprehensive information of Arg-PEA structure-property relationship, and the tunable properties of Arg-PEAs make them promising candidates for nucleic acid delivery and other biomedical applications. Overall, we have shown enough significance and novelty in terms of nucleic acid delivery, biomaterials, pharmaceutical science and nanomedicine.

Poly(ester amide)s with pendant azobenzenes: multi-responsive self-immolative moieties for modulating polymer assemblies

Polymer nanoassemblies containing pendant azobenzenes in their cores were prepared. Light-induced trans–cis isomerization of the azobenzenes increased the polarity of the assembly core, while reduction led to assembly degradation.

A comparison of covalent and noncovalent strategies for paclitaxel release using poly(ester amide) graft copolymer micelles

Micelles formed from amphiphilic copolymers are promising for the delivery of drug molecules, potentially leading to enhanced properties and efficacies. Critical aspects of these systems include the use of biocompatible, biodegradable polymer backbones as well as the ability to control the incorporation of drugs and their release rates. In this work, a poly(ester amide)–poly(ethylene oxide) graft copolymer with paclitaxel conjugated via ester linkages was prepared and assembled into micelles. For comparison, micelles with physically encapsulated paclitaxel were also prepared. The release rates of these two systems were studied, and the micelles with covalently conjugated paclitaxel exhibited a prolonged release of the drug in comparison to the noncovalent system, which rapidly released the payload. In vitro studies suggested that the poly(ester amide)–poly(ethylene oxide) copolymers were nontoxic, whereas the toxicities of the drug-loaded micelles were dependent on their release rates. Overall, these systems are promising for further development as anticancer drug carriers.

A novel pseudo-protein-based biodegradable coating for magnesium substrates: in vitro corrosion phenomena and cytocompatibility

The goal of this study is to examine whether a member of the newly developed biodegradable pseudo-protein biomaterial family could provide a far better protection and performance than the popular hydrolytically degradable poly(glycolide-co-lactide) (PLGA) biomaterial on an experimental magnesium substrate as a model.

Biomimetic L-aspartic acid-derived functional poly(ester amide)s for vascular tissue engineering

Functionalization of polymeric biomaterials permits the conjugation of cell signaling molecules capable of directing cell function. In this study, l-phenylalanine and l-aspartic acid were used to synthesize poly(ester amide)s (PEAs) with pendant carboxylic acid groups through an interfacial polycondensation approach. Human coronary artery smooth muscle cell (HCASMC) attachment, spreading and proliferation was observed on all PEA films. Vinculin expression at the cell periphery suggested that HCASMCs formed focal adhesions on the functional PEAs, while the absence of smooth muscle α-actin (SMαA) expression implied the cells adopted a proliferative phenotype. The PEAs were also electrospun to yield nanoscale three-dimensional (3-D) scaffolds with average fiber diameters ranging from 130 to 294nm. Immunoblotting studies suggested a potential increase in SMαA and calponin expression from HCASMCs cultured on 3-D fibrous scaffolds when compared to 2-D films. X-ray photoelectron spectroscopy and immunofluorescence demonstrated the conjugation of transforming growth factor-β1 to the surface of the functional PEA through the pendant carboxylic acid groups. Taken together, this study demonstrates that PEAs containing aspartic acid are viable biomaterials for further investigation in vascular tissue engineering.

Development of an arginine-based cationic hydrogel platform: Synthesis, characterization and biomedical applications

A series of biodegradable and biocompatible cationic hybrid hydrogels was developed from water-soluble arginine-based unsaturated polymer (Arg-AG) and poly(ethylene glycol) diacrylate (PEG-DA) by a photocrosslinking method. The physicochemical, mechanical and biological properties of these hydrogels were intensively examined. The hydrogels were characterized in terms of equilibrium swelling ratio (Qeq), compression modulus and interior morphology. The effects of the chemical structure of the two Arg-AG precursors and the feed ratio of these precursors on the properties of resulting hybrid hydrogels were investigated. The crosslinking density and mechanical strength of the hybrid hydrogels increased with an increase in allylglycine (AG) content in the Arg-AG precursor, as the gelation efficiency (Gf) increased from 80% to 90%, but the swelling and pore size of the hybrid hydrogels decreased as the equilibrium swelling weight (Qeq) decreased from 1890% to 1330% and the pore size from 28 to 22 μm. The short-term in vitro biodegradation properties of hydrogels were investigated as a function of Arg-AG chemical structures and enzymes. Hybrid hydrogels showed faster biodegradation in an enzyme solution than in a phosphate-buffered saline solution. Bovine serum albumin and insulin release profiles indicated that this cationic hydrogel system could significantly improve the sustained release of the negatively charged proteins. The cellular response of the hybrid hydrogels was preliminarily evaluated by cell attachment, encapsulation and proliferation tests using live-dead and MTT assay. The results showed that the hybrid hydrogels supported cell attachment well and were nontoxic to the cells.

Synthesis, properties and applications of biodegradable polymers derived from diols and dicarboxylic acids: from polyesters to poly(ester amide)s

Poly(alkylene dicarboxylate)s constitute a family of biodegradable polymers with increasing interest for both commodity and speciality applications. Most of these polymers can be prepared from biobased diols and dicarboxylic acids such as 1,4-butanediol, succinic acid and carbohydrates. This review provides a current status report concerning synthesis, biodegradation and applications of a series of polymers that cover a wide range of properties, namely, materials from elastomeric to rigid characteristics that are suitable for applications such as hydrogels, soft tissue engineering, drug delivery systems and liquid crystals. Finally, the incorporation of aromatic units and α-amino acids is considered since stiffness of molecular chains and intermolecular interactions can be drastically changed. In fact, poly(ester amide)s derived from naturally occurring amino acids offer great possibilities as biodegradable materials for biomedical applications which are also extensively discussed.

Focal contact formation of vascular smooth muscle cells on Langmuir-Blodgett and solvent-cast films of biodegradable poly(ester amide)s

The ability of biomaterials to support the adhesion of cells is a necessary condition for their use in scaffold-guided tissue engineering. Waveguide evanescent field fluorescence (WEFF) microscopy is a relatively new microscopic technique that allows the number of cell adhesions to a waveguide surface be measured by imaging the interfacial contact region between the cells and their substratum. In this work, the adhesion of human coronary artery smooth muscle cells (HCASMCs) to ultrathin films (20 nm) of poly(ester amide)s (PEAs) prepared by Langmuir-Blodgett (LB) technology on waveguides was investigated and compared with conventional vinculin immunostaining on solvent cast PEA films. Cell culture was conducted both in the presence and absence of serum to evaluate the effect of nonspecific protein adsorption that mediates cell adhesion. WEFF microscopy analyses revealed that the cationic PEA enhanced the number of attachment sites compared with the control waveguides regardless of the culture medium. Although differences in cell adhesions between different PEAs were suggested by the results, no statistically significant differences were found. Similar results were observed with presently and previously reported vinculin immunostaining studies, further validating the use of WEFF microscopy to quantify cell adhesions. Moreover, the focal adhesions of the HCASMCs to the PEA surfaces indicate these PEAs can promote integrin signaling, which is vital in cell survival, migration, and proliferation, and ultimately in scaffold-guided vascular tissue engineering.

Poly(ester amide)-Poly(ethylene oxide) Graft Copolymers: Towards Micellar Drug Delivery Vehicles

Micelles formed from amphiphilic copolymers are promising materials for the delivery of drug molecules, potentially leading to enhanced biological properties and efficacy. In this work, new poly(ester amide)-poly(ethylene oxide) (PEA-PEO) graft copolymers were synthesized and their assembly into micelles in aqueous solution was investigated. It was possible to tune the sizes of the micelles by varying the PEO content of the polymers and the method of micelle preparation. Under optimized conditions, it was possible to obtain micelles with diameters less than 100 nm as measured by dynamic light scattering and transmission electron microscopy. These micelles were demonstrated to encapsulate and release a model drug, Nile Red, and were nontoxic to HeLa cells as measured by an MTT assay. Overall, the properties of these micelles suggest that they are promising new materials for drug delivery systems.

Strategies in functional poly(ester amide) syntheses to study human coronary artery smooth muscle cell interactions

The design of new generation cardiovascular biomaterials focuses on biomimetic properties that are capable of eliciting specific cellular responses and directing new tissue formation. Synthetic poly(ester amide)s (PEAs) containing α-amino acid residues have the potential to elicit favorable cellular responses. Furthermore, they are biodegradable owing to the incorporation of naturally occurring amino acids. In this study, a family of PEAs was synthesized from selected α-amino acids using both solution and interfacial polymerization approaches to optimize their properties for vascular tissue engineering applications. By careful selection of the monomers and the polymerization approach, high-molecular-weight PEAs with low glass-transition temperatures were obtained. Human coronary artery smooth muscle cells (HCASMCs) cultured directly on bare PEA films attached and spread well up to 7 days of culture. Moreover, cell viability was significantly enhanced on all nonfunctional PEAs compared with tissue culture polystyrene controls. The trifluoroacetic acid salt of the lysine-containing functional PEAs was found to retard cell growth but still supported cell viability up to 5 days of culture. Immunostaining of HCASMCs revealed strong vinculin expression, suggesting that the HCASMCs initiated cellular processes for focal adhesion contacts with all PEA surfaces. Conversely, smooth muscle α-actin expression was not abundant on the PEA surfaces, suggesting a proliferative smooth muscle cell phenotype. Altogether, our results indicate that these PEAs are promising materials for vascular tissue engineering scaffolds.

α-Amino acid containing degradable polymers as functional biomaterials: rational design, synthetic pathway, and biomedical applications

Currently, biomedical engineering is rapidly expanding, especially in the areas of drug delivery, gene transfer, tissue engineering, and regenerative medicine. A prerequisite for further development is the design and synthesis of novel multifunctional biomaterials that are biocompatible and biologically active, are biodegradable with a controlled degradation rate, and have tunable mechanical properties. In the past decades, different types of α-amino acid-containing degradable polymers have been actively developed with the aim to obtain biomimicking functional biomaterials. The use of α-amino acids as building units for degradable polymers may offer several advantages: (i) imparting chemical functionality, such as hydroxyl, amine, carboxyl, and thiol groups, which not only results in improved hydrophilicity and possible interactions with proteins and genes, but also facilitates further modification with bioactive molecules (e.g., drugs or biological cues); (ii) possibly improving materials biological properties, including cell-materials interactions (e.g., cell adhesion, migration) and degradability; (iii) enhancing thermal and mechanical properties; and (iv) providing metabolizable building units/blocks. In this paper, recent developments in the field of α-amino acid-containing degradable polymers are reviewed. First, synthetic approaches to prepare α-amino acid-containing degradable polymers will be discussed. Subsequently, the biomedical applications of these polymers in areas such as drug delivery, gene delivery and tissue engineering will be reviewed. Finally, the future perspectives of α-amino acid-containing degradable polymers will be evaluated.

Biodegradable functional poly(ester amide)s with pendant hydroxyl functional groups: synthesis, characterization, fabrication and in vitro cellular response

The synthesis of a new family of biodegradable α-amino acid poly(ester amide)s (AA-PEAs) with pendant benzyl ether groups and hydroxyl functional groups is reported. The synthetic strategy employs the ring opening reaction of O-benzyl-L-serine-N-carboxyanhydride with di-p-toluenesulfonic acid salts of bis-L-valine butane-1,4-diester, followed by solution polycondesation reactions with di-p-nitrophenyl sebacate in N,N-dimethylacetamide. Catalytic hydrogenation of the resulting benzyl ether protected AA-PEAs (PEA-Ser-Bzs) was performed to restore the hydroxyl functional groups in the functionalized AA-PEAs (PEA-Ser-OH). All resulting polymers were characterized by standard physico-chemical methods. The pendant hydroxyl groups in PEA-Ser-OH were used to fabricate AA-PEA-based gels via acrylation and photo-gelation. The cell-polymer interactions of PEA-Ser-Bz and PEA-Ser-OH were evaluated in terms of cell attachment and proliferation assay using bovine aortic endothelial cells (BAECs) as well as fibroblasts. The cell culture data indicated that the hydrophobic/hydrophilic characteristics (from contact angle data) of these AA-PEAs could significantly affect the interaction between BAECs and AA-PEA. This finding may provide additional possible applications for this new family of functionalized AA-PEA polymers.

Versatile Biodegradable Poly(ester amide)s Derived from α-Amino Acids for Vascular Tissue Engineering

Biodegradable poly(ester amide) (PEA) biomaterials derived from α-amino acids, diols, and diacids are promising materials for biomedical applications such as tissue engineering and drug delivery because of their optimized properties and susceptibility for either hydrolytic or enzymatic degradation. The objective of this work was to synthesize and characterize biodegradable PEAs based on the α-amino acids l-phenylalanine and l-methionine. Four different PEAs were prepared using 1,4-butanediol, 1,6-hexanediol, and sebacic acid by interfacial polymerization. High molecular weight PEAs with narrow polydispersity indices and excellent film-forming properties were obtained. The incubation of these PEAs in PBS and chymotrypsin indicated that the polymers are biodegradable. Human coronary artery smooth muscle cells were cultured on PEA films for 48 h and the results showed a well-spread morphology. Porous 3D scaffolds fabricated from these PEAs were found to have excellent porosities indicating the utility of these polymers for vascular tissue engineering.