Engineering polymer surfaces with variable chemistry and topography

Toward Cell Selective Surfaces: Cell Adhesion and Proliferation on Breath Figures with Antifouling Surface Chemistry

We report the preparation of microporous functional polymer surfaces that have been proven to be selective surfaces toward eukaryotic cells while maintaining antifouling properties against bacteria. The fabrication of functional porous films has been carried out by the breath figures approach that allowed us to create porous interfaces with either poly(ethylene glycol) methyl ether methacrylate (PEGMA) or 2,3,4,5,6-pentafluorostyrene (5FS). For this purpose, blends of block copolymers in a polystyrene homopolymer matrix have been employed. In contrast to the case of single functional polymer, using blends enables us to vary the chemical distribution of the functional groups inside and outside the formed pores. In particular, fluorinated groups were positioned at the edges while the hydrophilic PEGMA groups were selectively located inside the pores, as demonstrated by TOF-SIMS. More interestingly, studies of cell adhesion, growth, and proliferation on these surfaces confirmed that PEGMA functionalized interfaces are excellent candidates to selectively allow cell growth and proliferation while maintaining antifouling properties.

Fabrication of structured porous films by breath figures and phase separation processes: tuning the chemistry and morphology inside the pores using click chemistry

Herein, a facile water-assisted templating technique, the so-called breath figures method, in combination with phase separation process, was employed to prepare multifunctional micropatterned films. Tetrahydrofuran solutions of incompatible ternary blends consisting of high-molecular-weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS40-b-P(PEGMA300)48), and a fluorinated homopolymer, poly(2,3,4,5,6-pentafluorostyrene) (P5FS21) were casted under humid atmosphere varying the proportion of the components. Two simultaneously occurring processes, i.e., the breath figures mechanism and the phase separation process, lead to unprecedented morphologies that could be tuned by simply varying the relative humidity or the composition of the blend. Confocal micro-Raman spectroscopy served to provide information about the location and distribution of the different functionalities in the films. As a result, both the amphiphilic block copolymer and the fluorinated polymer were mainly located in the cavities. Above a certain percentage of relative humidity, honeycomb structured films were obtained in which the block copolymer is distributed on the edge of the pore as a result of the affinity by the condensing water droplet and the coffee stain effect. The homopolymer is also preferentially situated at the pore edge, but forming spherical domains with narrow polydisperse sizes. Moreover, thiolated glucose molecules were specifically attached to the P5FS21 domains via thiol-para fluorine "click" reaction. Subsequently, the specific lectin (Concanavalin A, Canavalia ensiformis) was attached to the surface by conjugation with the glucose moieties. The successful binding of the Con A was demonstrated by the fluorescence, observed exclusively at the areas where P5FS21 domains are located. This nonlithographic method opens a new route to fabricate a huge variety of microstructured polymer films in terms of morphology not only for protein patterning, as illustrated in this manuscript, but also to produce a diversity of functional group arrangements.

Hierarchically structured multifunctional porous interfaces through water templated self-assembly of ternary systems

Herein, a facile water-assisted templating approach, the so-called breath figures method, has been employed to prepare multifunctional and hierarchically structured porous patterned films with order at different length scales (nano- and micrometer). Tetrahydrofuran solutions of ternary blends consisting on high molecular weight polystyrene, an amphiphilic block copolymer, polystyrene-b-poly[poly(ethylene glycol) methyl ether methacrylate] (PS(40)-b-P(PEGMA300)(48)), and a fluorinated copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene) (P5FS(21)-b-PS(31)), have been used to obtain films varying the proportion of the three components. Confocal micro-Raman spectroscopy and atomic force microscopy demonstrated the preferential location of the different functionalities in the films. Because of the breath figures mechanism, the amphiphilic copolymer yield pores enriched in hydrophilic functionality while the fluorinated copolymer remained mixed with the PS matrix and eventually also forming self-assembled nanostructures at the surface. As a consequence, two levels of order can be observed, i.e., micrometer size pores with nanostructured domains due to the block copolymer self-assembly. In addition, the distribution of the amphiphilic copolymer within the holes is not regular being located principally on the edges of the cavities. This can be attributed to the coffee stain phenomenon occurring in the water droplets as a consequence of the segregation of the block copolymers to the droplets and their self-assembly.

Tunable assembly of nanoparticles on patterned porous film

This paper describes an approach to fully selective assembly of nanoparticles on patterned porous surface. Copolymers of polystyrene-block-poly(N,N-dimethylaminoethyl methacrylate) synthesized by atom transfer radical polymerization were used to prepare honeycomb-patterned porous films by the breath figure method. The regularity and pore size of the films can be modulated by changing the polymer composition and casting conditions such as concentration and airflow speed. Positively charged films were fabricated directly from the quaternized copolymers or by surface quaternization. X-ray photoelectron spectroscopy and adsorption of negatively charged fluorescein sodium salt confirmed the quaternization. Then assembly of negatively charged silica nanoparticles from its aqueous dispersion was performed. Results indicate that they assemble on the external surface of patterned porous films that without prewetting. For prewetted films, the nanoparticles assemble both on the external surface and in the pores. Poly(acrylic acid) deposited from its aqueous solution can serve as an effective blocking layer, which directs the selective assembly of nanoparticles into the pores, instead of the external surface of the film. It is concluded that the Cassie-Wenzel transition is the key to the selective assembly on the highly porous films. The well-defined selective assembly forms unique hierarchical structures of nanoparticles and greatly enlarges the diversity of structures of nanoparticle aggregates. This general approach also opens a straightforward route to the selective modification of patterned porous films.