RAFT copolymerization of methacrylic acid and poly(ethylene glycol) methyl ether methacrylate in the presence of a hydrophobic chain transfer agent in organic solution and in water

Tailoring Amphiphilic Copolymers for Improved Aqueous Foam Stability

Amphiphilic copolymers of various-molecular-weight (MW) poly(ethylene glycol) (PEG) were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The first PEG series, poly(ethylene glycol)monomethacrylate (PEGMA, average Mn 200 and 400 MW), contained an -OH terminal group, and the second series, poly(ethylene glycol) monomethyl ether monomethacrylate (PEGMMA, average Mn 200, 400, and 1000 MW), possessed an -OCH₃ terminal group. A total of five PEG-functionalized copolymers contained the same hydrophobic monomer, butyl acrylate (BA), and were successfully reproduced via a one-pot synthesis. The resulting PEG-functionalized copolymers provide a systematic trend of properties including surface tension, critical micelle concentration (CMC), cloud point (CP), and foam lifetime based on the average MW of the PEG monomer and final polymer properties. In general, the PEGMA series produced more stable foams with PEGMA200 demonstrating the least change in foam height with time over a 10 min period. The important exception is that at elevated temperatures, the PEGMMA1000 copolymer had longer foam lifetimes. The self-assembling copolymers were characterized by gel permeation chromatography (GPC), ¹H nuclear magnetic resonance (NMR), attenuated total reflection Fourier transform infrared (FTIR-ATR), CMC, surface tension, dynamic light scattering (DLS), as a foam using a dynamic foam analyzer (DFA), and foam lifetime at ambient and elevated temperatures. The copolymers described highlight the importance of the PEG monomer MW and terminal end group for surface interaction and final polymer properties for foam stabilization.

Copolymer Reversible Addition-Fragmentation Chain Transfer Synthesis of Polyethylene Glycol (PEG) Functionalized with Hydrophobic Acrylates: A Study of Surface and Foam Properties

A series of amphiphilic statistical copolymers involving poly(ethylene glycol) monomethacrylate (PEGMA, -OH terminated, average Mn 200 molecular weight) and various hydrophobic acrylates were synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The gradient copolymers were characterized by gel-permeation chromatography (GPC), ¹H nuclear magnetic resonance (NMR), and attenuated total reflection Fourier transform infrared spectroscopy (FTIR-ATR). Solution properties of the copolymers were investigated utilizing surface tension measurement, dynamic light-scattering (DLS), as well as foam analysis using a dynamic foam analyzer (DFA). The PEG-functionalized copolymers showed a systematic trend depending on the hydrophobic moiety in properties including surface tension, critical micelle concentration (CMC), foam lifetime, and liquid drainage from the foam. Copolymers with alkyl-acrylates exhibited the best foam lifetime, demonstrating that the choice of hydrophobic moiety is crucial for foam stability. The PEG-functionalized materials described are considered promising additives for foam-stability purposes.

A Method for Characterizing the Chemical Heterogeneity of Comb-Copolymers and Its Dependence on Synthesis Routes

The heterogeneity in chemical structure of polymers is difficult to characterize and consequently remains an often-overlooked factor in mechanistic studies of functional polymers, as well as in their industrial scale optimization. In this study, we present a method to characterize chemical heterogeneity and apply it to illustrate how it can be affected differently in different synthesis routes. The polymers used are comb-copolymer dispersants used in particulate suspensions which are composed of a polycarboxylate backbone onto which PEG side chains are grafted. The largest use of these polymers concerns concrete, where they are referred to as poly(carboxylate ether) (PCE) superplasticizers and produced at a very large industrial scale. Apart from their practical relevance, PCEs provide a good test case for studying the means and benefits of characterizing chemical heterogeneity. Indeed, the simple addition of a UV detector to a traditional SEC setup with RI detection allowed us to monitor variations in the grafting ratio in dependence on the molecular size. We show that the synthesis pathway significantly impacts the chemical heterogeneity. The suggested method is versatile and can be adapted for a wide range of hydrophilic copolymers. Thus, we present a tool to comprehensively analyze the molecular heterogeneity of dispersants and give a deep insight into their chemical dispersity.

Well-Defined Thermo-Responsive Copolymers Based on Oligo(Ethylene Glycol) Methacrylate and Pentafluorostyrene for the Removal of Organic Dyes from Water

Thermo-responsive copolymers based on oligo(ethylene glycol) methacrylate (OEGMA, Mn = 300 g/mol) and pentafluorostyrene (PFS), coded PFG, were synthesized by RAFT polymerization, using a trithiocarbonate (CTTPC) as controlling agent. Different molar masses were targeted and dispersities lower than 1.51 were obtained. The thermally triggered self-assembly of the resulting PFG copolymers in water was investigated by dynamic light scattering (DLS). The lower critical solution temperature (LCST) slightly increased with the molecular weight in the 26-30 °C temperature range, whereas the sizes of the intermicellar aggregates formed upon self-assembly tended to decrease with increasing molecular weights (ranging from 1415 to 572 nm). The resulting thermally-induced polymer aggregates were then used to encapsulate and remove organic contaminants from water. Nile Red (NR) and Thiazole yellow G (TYG) were employed as hydrophobic and hydrophilic model contaminants, respectively. Experimental results evidenced that higher molecular weight copolymers removed up to 90% of NR from aqueous solution, corresponding to about 10 mg of dye per g of copolymer, regardless of NR concentration. The removal of TYG was lower with respect to NR, decreasing from about 40% to around 20% with TYG concentration. Finally, the copolymers were shown to be potentially recycled and reused in the treatment of contaminated water.

Tough, Self-Healing Hydrogels Capable of Ultrafast Shape Changing

Achieving multifunctional shape-changing hydrogels with synergistic and engineered material properties is highly desirable for their expanding applications, yet remains an ongoing challenge. The synergistic design of multiple dynamic chemistries enables new directions for the development of such materials. Herein, a molecular design strategy is proposed based on a hydrogel combining acid-ether hydrogen bonding and imine bonds. This approach utilizes simple and scalable chemistries to produce a doubly dynamic hydrogel network, which features high water uptake, high strength and toughness, excellent fatigue resistance, fast and efficient self-healing, and superfast, programmable shape changing. Furthermore, deformed shapes can be memorized due to the large thermal hysteresis. This new type of shape-changing hydrogel is expected to be a key component in future biomedical, tissue, and soft robotic device applications.

Structure-property relationships for polycarboxylate ether superplasticizers by means of RAFT polymerization

HYPOTHESIS

Polycarboxylate ether (PCE) comb-copolymers are widely used as water reducing agents in the concrete industry while maintaining a high fluidity via the polymer adsorption to the cement particles. PCE copolymers with a broad range of structures are well established by Free radical polymerization, however, understanding the structure-property relationship is still complex due to the high polydispersity of PCE copolymers prepared by conventional polymerization. The influence of different structural parameters using well-defined polymeric structures is yet to be explored.

EXPERIMENTS

In this study, two different types of comb-like random copolymers, namely polycarboxylate ether (PCE; poly(oligo(ethylene glycol) methyl ether methacrylate/methacrylic acid)) and polysulfonate ether (PSE; poly(oligo(ethylene glycol) methyl ether acrylate/sodium 4-styrenesulfonate)), were synthesized by RAFT polymerization to enable the synthesis of polymers with controlled features. The effect of charge types and side chain lengths on the adsorption, rheology, and dispersing ability of cement pastes have been studied.

FINDINGS

RAFT polymerization could be used to prepare PCE random copolymers with good control over the polymer molecular weight and narrow polydispersity (Đ < 1.3). Results revealed that the ζ-potential values depend on both the charge type and side chain lengths. Copolymers containing SO₃^- exhibited higher absolute negative ζ-potential values than COO^- while PCE copolymers with shorter side chains developed higher absolute negative ζ-potential values. On the other hand, the adsorption study demonstrated that decreasing the side chain lengths lead to higher adsorption of PCE copolymers while Copolymers with COO^- groups were found to be adsorbed more than SO₃^- counterparts. These results are further confirmed with the rheological studies and it is found that the shorter the side chain, the lower the yield stress and the higher the dispersion of cement pastes but to a limited effect. Additionally, the charge types have a major influence on the performance of superplasticizers. This study could make further progress in establishing superplasticizers with controlled architectures for better performance.

Investigation of the Adsorption of Amphipathic macroRAFT Agents onto Montmorillonite Clay

Recently, there has been significant interest in the use of the reversible addition-fragmentation chain-transfer (RAFT) technique to generate a variety of organic/inorganic colloidal composite particles in aqueous dispersed media using the so-called macroRAFT-assisted encapsulating emulsion polymerization (REEP) strategy. In this process, special attention should be paid to the adsorption of the macromolecular RAFT (macroRAFT) agent onto the inorganic particles, as it determines the final particle morphology and can also influence latex stability. In this work, different amphipathic macroRAFT agents were synthesized by RAFT, and their adsorption onto commercial Montmorillonite clay Cloisite Na⁺ (MMT) was studied by means of adsorption isotherms. Three types of macroRAFT agents were considered: a nonionic one based on poly(ethylene glycol) methyl ether acrylate (PEGA) and n-butyl acrylate (BA), anionic ones, including a block copolymer and random copolymers, based on acrylic acid (AA), BA and PEGA, and cationic ones based on 2-(dimethylamino)ethyl methacrylate (DMAEMA), BA and PEGA. Six adsorption isotherm models (Langmuir, Freundlich, Tempkin, Redlich-Peterson, Sips, and Brunauer-Emmett-Teller) were adjusted to the experimental isotherms. The nonionic macroRAFT agent formed a monolayer on the clay surface with a maximum adsorption capacity of 400 mg g^-1 at pH 8, as determined from the Sips adsorption model. Adsorption of the AA-based macroRAFT agents onto MMT was moderate at alkaline pH due to electrostatic repulsions, but increased with decreasing pH. The DMAEMA-based macroRAFT agents displayed a much stronger interaction with the oppositely charged MMT surface at acidic pH due to electrostatic interactions, and the concentration of adsorbed macroRAFT agent reached values as high as 800 mg g^-1. The BET model fitted the experimental data relatively well indicating multilayer adsorption promoted by the presence of the hydrophobic BA units. In addition, the cationic macroRAFT agents afforded stable MMT/macroRAFT agent complexes as evaluated by dynamic light scattering and zeta potential analyses.

Single-Ion Block Copoly(ionic liquid)s as Electrolytes for All-Solid State Lithium Batteries

Polymer electrolytes have been proposed as replacement for conventional liquid electrolytes in lithium-ion batteries (LIBs) due to their intrinsic enhanced safety. Nevertheless, the power delivery of these materials is limited by the concentration gradient of the lithium salt. Single-ion conducting polyelectrolytes represent the ideal solution since their nature prevents polarization phenomena. Herein, the preparation of a new family of single-ion conducting block copolymer polyelectrolytes via reversible addition-fragmentation chain transfer polymerization technique is reported. These copolymers comprise poly(lithium 1-[3-(methacryloyloxy)propylsulfonyl]-1-(trifluoromethylsulfonyl)imide) and poly(ethylene glycol) methyl ether methacrylate blocks. The obtained polyelectrolytes show low Tg values in the range of -61 to 0.6 °C, comparatively high ionic conductivity (up to 2.3 × 10(-6) and 1.2 × 10(-5) S cm(-1) at 25 and 55 °C, respectively), wide electrochemical stability (up to 4.5 V versus Li(+)/Li), and a lithium-ion transference number close to unity (0.83). Owing to the combination of all mentioned properties, the prepared polymer materials were used as solid polyelectrolytes and as binders in the elaboration of lithium-metal battery prototypes with high charge/discharge efficiency and excellent specific capacity (up to 130 mAh g(-1)) at C/15 rate.

Synthesis of poly(N-acryloylmorpholine) macromonomers using RAFT and their copolymerization with methacrylic acid for the design of graft copolymer additives for concrete

Methacrylate end-capped poly(N-acryloylmorpholine) macromonomers (PNAM-MA) of number-average molar mass of about 2400 g mol⁻¹ have been synthesized by post-modification of PNAM chains obtained by RAFT.

Synthesis of a polymethyl(methacrylate)-polystyrene-based diblock copolymer containing biotin for selective protein nanopatterning

Synthesis of a polymethyl(methacrylate) (PMMA)-polystyrene (PS)-based diblock copolymer capable of segregating into biotin-containing PS nanodomains within an antifouling pegylated PMMA matrix: effective protein nanopatterning through streptavidin molecular recognition.

Synthesis and characterization of transferrin-targeted chemotherapeutic delivery systems prepared via RAFT copolymerization of high molecular weight PEG macromonomers

Reversible addition-fragmentation chain transfer (RAFT) polymerization was employed to prepare a nanoparticulate drug delivery system for chemotherapeutics. The nanoparticles contain a PEG "stealth" corona as well as reactive anhydride functionality designed for conjugating targeting proteins. The multifunctional carrier functionality was achieved by controlling the copolymerization of the hydrophobic monomer lauryl methacrylate (LMA), with a reactive anhydride functional methacrylate (TMA), and a large polyethyleneglycol methacrylate monomer (M_n~950 Da) (O950). RAFT polymerization kinetics of O950 were evaluated as a function of target degrees of polymerization (DP), initial chain transfer agent to initiator ratio ([CTA]_o/[I]_o), and solvent concentration. Excellent control over the polymerization was observed for target DPs of 25 and 50 at [CTA]_o/[I]_o ratio of 10 as evidenced by narrow and symmetric molecular weight distributions and the ability to prepare block copolymers. The TMA-functional copolymers were conjugated to the tumor targeting protein transferrin (Tf). The targeted copolymer was shown to encapsulate docetaxel at concentrations comparable to the commercial single vial formulation of docetaxel (Taxotere). In vitro cytotoxicity studies conducted in HeLa cells show that the Tf targeting enhances the cancer killing properties relative to the polymer encapsulated docetaxel formulation.

Microscopic mechanism for shear thickening of non-Brownian suspensions

We propose a simple model, supported by contact-dynamics simulations as well as rheology and friction measurements, that links the transition from continuous to discontinuous shear thickening in dense granular pastes to distinct lubrication regimes in the particle contacts. We identify a local Sommerfeld number that determines the transition from Newtonian to shear-thickening flows, and then show that the suspension's volume fraction and the boundary lubrication friction coefficient control the nature of the shear-thickening transition, both in simulations and experiments.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.

Amphiphilic block copolymers from a direct and one-pot RAFT synthesis in water

The syntheses of amphiphilic block copolymers are successfully performed in water by chain extension of hydrophilic macromolecules with styrene at 80 °C. The employed strategy is a one-pot procedure in which poly(acrylic acid), poly(methacrylic acid) or poly(methacrylic acid-co-poly(ethylene oxide) methyl ether methacrylate) macroRAFTs are first formed in water using 4-cyano-4-thiothiopropylsulfanyl pentanoic acid (CTPPA) as a chain transfer agent. The resulting macroRAFTs are then directly used without further purification for the RAFT polymerization of styrene in water in the same reactor. This simple and straightforward strategy leads to a very good control of the resulting amphiphilic block copolymers.

Amphiphilic dual brush block copolymers as "giant surfactants" and their aqueous self-assembly

Amphiphilic dual brush diblock as well as symmetrical triblock polymers were synthesized by the overlay of the reversible addition-fragmentation chain transfer (RAFT) and the nitroxide mediated polymerization (NMP) techniques. While poly(ethylene glycol) brushes served as hydrophilic block, the hydrophobic block was made of polystyrene brushes. The resulting "giant surfactants" correspond structurally to the established amphiphilic diblock and triblock copolymer known as macrosurfactants. The aggregation behavior of the novel "giant surfactants" in aqueous solution was studied by dynamic light scattering, small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) over a large range in reciprocal space. Further, the self-assembled aggregates were investigated by scanning force microscopy (SFM) after deposition on differently functionalized ultraflat solid substrates. Despite the high fraction of hydrophobic segments, the polymers form stable mesoscopic, spherical aggregates with hydrodynamic diameters in the range of 150-350 nm. Though prepared from well-defined individual polymers, the aggregates show several similarities to hard core latexes. They are stable enough to be deposited without much changes onto surfaces, where they cluster and show spontaneous sorting according to their size within the clusters, with the larger aggregates being in the center.