Cu(0) mediated polymerization in toluene using online rapid GPC monitoring

Real-Time Determination of Molecular Weight: Use of MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) to Monitor the Progress of Polymerization Reactions

Knowledge of molecular weight is an integral factor in polymer synthesis, and while many synthetic strategies have been developed to help control this, determination of the final molecular weight is often only measured at the end of the reaction. Herein, we provide a technique for the online determination of polymer molecular weight using a universal, solvent-independent diffusion ordered spectroscopy (DOSY) calibration and evidence its use in a variety of polymerization reactions.

Advances in continuous polymer analysis in flow with application towards biopolymers

Biopolymers, polymers derived from renewable biomass sources, have gained increasing attention in recent years due to their potential to replace traditional petroleum-based polymers in a range of applications. Among the many advantages of biopolymers can be included their biocompatibility, excellent mechanical properties, and availability from renewable feedstock. However, the development of biopolymers has been limited by a lack of understanding of their properties and processing behaviours. Continuous analysis techniques have the potential to hasten progress in this area by providing real-time insights into the properties and processing of biopolymers. Significant research in polymer chemistry has focused on petroleum-derived polymers and has thus provided a wealth of synthetic and analytical methodologies which may be applied to the biopolymer field. Of particular note is the application of flow technology in polymer science and its implications for accelerating progress towards more sustainable and environmentally friendly alternatives to traditional petroleum-based polymers. In this mini review we have outlined several of the most prominent use cases for biopolymers along with the current state-of-the art in continuous analysis of polymers in flow, including defining and differentiating atline, inline, online and offline analysis. We have found several examples for continuous flow analysis which have direct application to the biopolymer field, and we demonstrate an atline continuous polymer analysis method using size exclusion chromatography.

Graphical abstract

Rapid Online Analysis of Photopolymerization Kinetics and Molecular Weight Using Diffusion NMR

Online, high-throughput molecular weight analysis of polymerizations is rare, with most studies relying on tedious sampling techniques and batchwise postanalysis. The ability to track both monomer conversion and molecular weight evolution in real time could underpin precision polymer development and facilitate study of rapid polymerization reactions. Here, we use a single time-resolved diffusion nuclear magnetic resonance (NMR) experiment to simultaneously study the kinetics and molecular weight evolution during a photopolymerization, with in situ irradiation inside the NMR instrument. As a model system, we used a photoinduced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The data allow diffusion coefficients and intensities to be calculated every 14 s from which the polymer size and monomer conversion can be extracted. Key to this approach is (1) the use of shuffled gradient amplitudes in the diffusion NMR experiment to access reactions of any rate, (2) the addition of a relaxation agent to increase achievable time resolution and, (3) a sliding correction that accounts for viscosity changes during polymerization. Diffusion NMR offers a uniquely simple, translatable handle for online monitoring of polymerization reactions.

High-Throughput Routes to Biomaterials Discovery

Many existing clinical treatments are limited in their ability to completely restore decreased or lost tissue and organ function, an unenviable situation only further exacerbated by a globally aging population. As a result, the demand for new medical interventions has increased substantially over the past 20 years, with the burgeoning fields of gene therapy, tissue engineering, and regenerative medicine showing promise to offer solutions for full repair or replacement of damaged or aging tissues. Success in these fields, however, inherently relies on biomaterials that are engendered with the ability to provide the necessary biological cues mimicking native extracellular matrixes that support cell fate. Accelerating the development of such "directive" biomaterials requires a shift in current design practices toward those that enable rapid synthesis and characterization of polymeric materials and the coupling of these processes with techniques that enable similarly rapid quantification and optimization of the interactions between these new material systems and target cells and tissues. This manuscript reviews recent advances in combinatorial and high-throughput (HT) technologies applied to polymeric biomaterial synthesis, fabrication, and chemical, physical, and biological screening with targeted end-point applications in the fields of gene therapy, tissue engineering, and regenerative medicine. Limitations of, and future opportunities for, the further application of these research tools and methodologies are also discussed.

Facile access to functional polyacrylates with dual stimuli response and tunable surface hydrophobicity

Well-defined functional polyacrylates with dual stimuli response and tunable surface hydrophobicity were synthesized via the recyclable Ni–Co alloy catalyzed reversible deactivation radical polymerization technique at ambient temperature.

Online tracing of molecular weight evolution during radical polymerization via high-resolution FlowNMR spectroscopy

High-resolution FlowNMR was coupled to a continuous flow reactor to monitor polymer molecular weight evolution online by diffusion ordered NMR spectroscopy.

Enabling technologies in polymer synthesis: accessing a new design space for advanced polymer materials

This review discusses how developments in laboratory technologies can push the boundaries of what is achievable using existing polymer synthesis techniques.

An optimised Cu(0)-RDRP approach for the synthesis of lipidated oligomeric vinyl azlactone: toward a versatile antimicrobial materials screening platform

This report details the synthesis of lipidated 2-vinyl-4,4-dimethyl-5-oxazolone (VDM) oligomers via an optimised Cu(0)-mediated reversible-deactivation radical polymerisation approach, and the use of these oligomers as a versatile functional platform for the rapid generation of antimicrobial materials. The relative amounts of CuBr₂ and Me₆TREN were optimised to allow the fast and controlled polymerisation of VDM. These conditions were then used with the initiators ethyl 2-bromoisobutyrate, dodecyl 2-bromoisobutyrate, and (R)-3-((2-bromo-2-methylpropanoyl)oxy)propane-1,2-diyl didodecanoate to synthesise a library of oligo(VDM) (degree of polymerisation = 10) with ethyl, dodecyl or diglyceride end-groups. Subsequently, ring-opening of the pendant oxazolone group with various amines (i.e., 2-(2-aminoethyl)-1,3-di-Boc-guanidine, 1-(3-aminopropyl)imidazole, N-Boc-ethylenediamine, or N,N-dimethylethylenediamine) expanded the library to give 12 functional oligomers incorporating different cationic and lipid elements. The antimicrobial activities of these oligomers were assessed against a palette of bacteria and fungi: i.e. Staphylococcus aureus, Escherichia coli, Candida albicans, and Cryptococcus neoformans. The oligomers generally exhibited the greatest activity against the fungus, C. neoformans, with a minimum inhibitory concentration of 1 μg mL^-1 (comparable to the clinically approved antifungal fluconazole). To assess haemocompatibility, the oligomers were assayed against erythrocytes, with the primary amine or guanidine containing C₁₂ and 2C₁₂ oligomers exhibiting greater lysis against the red blood cells (HC₁₀ values between 7.1 and 43 μg mL^-1) than their imidazole and tertiary amine counterparts (HC₁₀ of >217 μg mL^-1). Oligomers showed the greatest selectivity for C. neoformans, with the C₁₂- and 2C₁₂-tertiary amine and C₁₂-imidazole oligomers possessing the greatest selectivity of >54-109. These results demonstrate the utility of reactive oligomers for rapidly assessing structure-property relationships for antibacterial and antifungal materials.

Cu(0)-mediated living radical polymerization: recent highlights and applications; a perspective

Cu(0)-mediated living radical polymerization or single electron transfer living radical polymerization (Cu(0)-mediated LRP or SET-LRP) is a versatile polymerization technique that has attracted considerable interest during the past few years for the facile preparation of advanced materials.

Utilising alternative modifications of α-olefin end groups to synthesise amphiphilic block copolymers

Amphiphilic block copolymers comprised of polyisobutylene (PIB) and poly(2-(dimethylamino)ethyl methacrylate) (DMAEMA) have been synthesised.

Insights into relevant mechanistic aspects about the induction period of Cu0/Me6TREN-mediated reversible-deactivation radical polymerization

The induction period and subsequent autoaccelerated polymerization of a Cu⁰/Me₆TREN-catalyzed system originate from the accumulation of soluble copper species.

Synthesis of polymer precursors of electroactive materials by SET-LRP

SET-LRP is used for the controlled copolymerisation of 2,2,6,6-tetramethylpiperidin-4-yl methacrylate (TMPM) with 3-azidopropyl methacrylate (AzPMA), followed by the oxidation of TMPM to produce electroactive poly(TEMPO methacrylate) (PTMA).

Facile synthesis of well-defined redox responsive diselenide-labeled polymers via organoselenium-mediated CRP and aminolysis

A protocol for introducing the redox responsive Se–Se bond into well-defined polymer backbones was developed.

Synthesis of high molar mass poly(n-butyl acrylate) and poly(2-ethylhexyl acrylate) by SET-LRP in mixtures of fluorinated alcohols with DMSO

SET-LRP of n-butyl acrylate (nBA) and 2-ethylhexyl acrylate (EHA) initiated with bis(2-bromopropionyl)ethane (BPE) to synthesize high molar mass poly(nBA) and poly(EHA) was carried out in binary mixtures of 2,2,2-trifluoroethanol (TFE) or 2,2,3,3-tetrafluoropropanol (TFP) with DMSO at 50 °C.

Investigations on the Combination of Cationic Ring Opening Polymerization and Single Electron Transfer Living Radical Polymerization to Synthesize 2-Ethyl-2-Oxazoline Block Copolymers

Cationic ring opening polymerization of 2-ethyl-2-oxazoline (EtOx) has been performed using α–bromoisobutyryl bromide (tertiary) and 2-bromopropionyl bromide (secondary) as initiators in acetonitrile. The reaction kinetics have been followed and selected P(EtOx) polymers have been used as macroinitiators for the single electron transfer living radical polymerization (SET-LRP) of methyl acrylate (MA), ethylene glycol methyl ether acrylate and 2-(dimethylamino)ethyl methacrylate. Moreover, the effect of solvent and catalyst concentration have been investigated on the SET-LRP of P(EtOx) initiated MA.

Synthesis of multi-block copolymer stars using a simple iterative Cu(0)-mediated radical polymerization technique

A new iterative copper(0)-mediated radical polymerization approach is presented that represents a significant advance in the synthesis of high order multi-block star copolymers. The synthesis of these materials can now be achieved in high yield and with controlled structural complexity, with purification only required at the last step. The approach is general, facile and offers the opportunity to synthesize new copolymer stars.