Synthesis and micellization of new biodegradable phosphorylcholine-capped polyurethane

Starch-based isocyanate- and non-isocyanate polyurethane hybrids: A review on synthesis, performance and biodegradation

The challenges related to the persistence of plastics in natural ecosystems fostered strong interest in developing biodegradable bioplastics. Among natural biopolymers, starch gained both academic and industrial interest owing to its impressive physicochemical properties. The use of starch in production of polyurethane (PU) composites not only yields PUs with outstanding mechanical properties but also makes the final PU products biodegradable. The hydrophilic nature of starch limits its dispersion in hydrophobic PU polymers, although it is a significant benefit in creating starch-embedded non-isocyanate polyurethane (NIPU) composites. We present a comprehensive overview to highlight important strategies that are used to improve the compatibility of starch with various PU matrices. This review also gives an overview of the recent advances in the synthesis of starch-NIPU hybrids. Moreover, we aim to deliver critical insight into strategies that boost the biodegradation characteristics of PUs along with a discussion on various methods to assess their biodegradation.

Synthesis of PLA-poly(ether urethane)-PLA copolymers and design of biodegradable anti-adhesive membranes for orthopaedic applications

Peritendinous adhesions cause chronic pain and disability. Leading causes are trauma to tendons and surrounding tissues and immobilization after surgery. Adhesions occur between 24 hours to 6 weeks after surgery. Anti-adhesion barriers are currently the best option available to prevent peritendinous adhesions, but are ineffective and difficult to use. We developed an anti-adhesive membrane that can be easily applied during tendon surgery and effectively prevent adhesions. The membrane is based on a new triblock copolymer, is non-toxic, can be bio-eliminated, and has a degradation rate of more than 6 weeks for optimal anti-adhesion effect. We synthesized and characterized poly(ether urethane) (PEU) from poly(ethylene glycol). Triblock copolymers poly(lactic acid)-PEU-poly(lactic acid) (PLA-PEU-PLA) were then synthesized from PEU with PLA blocks of different lengths, and characterized. The membranes were shaped by hot molding and their mechanical properties, contact angle, water uptake, the kinetics of in vitro degradation and cytotoxicity were studied. Mechanical properties were developed according to the needs of orthopaedic surgeons. Results showed that membranes maintained their filmogenic integrity, have a degradation rate for optimal adhesion prevention, can be bioeliminated and biocompatible suggesting that they could be safely and effectively used as anti-adhesion orthopaedic devices. These results support the use of PLA-PEU-PLA membranes as a medical device, however, the effectiveness of the membranes in vivo needs to be further evaluated. A future study using an in vivo rat model of postoperative peritendinous adhesions is currently being developed.

UV-induced photolysis of polyurethanes

Waste production associated with the use of non-degradable materials in packaging is a growing cause of environmental concern, with the polyurethane (PU) class being notorious for their lack of degradability. Herein, we incorporate photosensitive ortho-Nitrobenzyl units into PUs to achieve controllable photodegradability. We performed their photolysis in solution and thin films which can inform the design of degradable adhesives.

Synthesis and characterization of PLGA-PEG-PLGA based thermosensitive polyurethane micelles for potential drug delivery

Polyurethane nanomicelle is a promising functional drug delivery system. In this work, the polyurethane (P3-PU) was synthesized from PLGA₁₂₀₀-PEG₁₄₅₀-PLGA₁₂₀₀ (P3, a thermosensitive and biodegradable triblock copolymer) and L-lysine ester diisocyanate (LDI). Then, reactive benzaldehyde was further imported to terminate P3-PU to obtain benzaldehyde modified polyurethane (P3-PUDA). The micelles, temperature-sensitive P3-PU nanomicelle and P3-PUDA nanomicelle, were systematically investigated, including the size, stability, temperature sensitivity, drug loading and release behavior, cytotoxic on human hepatocytes (L02), and inhibitory effect on human hepatocellular carcinoma cells (HepG2). The results show the thermosensitive behavior of the micelles can be adjusted by the terminal group. The polyurethane micelles with a uniform size between 20 nm and 30 nm showed excellent stability and good biocompatibility to L02 cells. Besides, in vitro experiments showed that Dox-loaded P3-PUDA micelles exhibited faster and higher release rate at 37 °C and better inhibitory effect on HepG2 than the Dox-loaded P3-PU micelles. Moreover, the achieved benzaldehyde modified polyurethanes also provides various possibilities to adjust further to enlarge its applications. Therefore, the polyurethane micelles will have great potential in the field of drug carriers.

Surface-modified polymeric nanoparticles for drug delivery to cancer cells

INTRODUCTION

The utilization of polymeric nanoparticles, as drug payloads, has been extensively prevailed in cancer therapy. However, the precise distribution of these nanocarriers is restrained by various physiological and cellular obstacles. Nanoparticles must avoid nonspecific interactions with healthy cells and in vivo compartments to circumvent these barriers. Since in vivo interactions of nanoparticles are mainly dependent on surface properties of nanoparticles, efficient control on surface constituents is necessary for the determination of nanoparticles' fate in the body.

AREAS COVERED

In this review, the surface-modified polymeric nanoparticles and their utilization in cancer treatment were elaborated. First, the interaction of nanoparticles with numerous in vivo barriers was highlighted. Second, different strategies to overcome these obstacles were described. Third, some inspiring examples of surface-modified nanoparticles were presented. Later, fabrication and characterization methods of surface-modified nanoparticles were discussed. Finally, the applications of these nanoparticles in different routes of treatments were explored.

EXPERT OPINION

Surface modification of anticancer drug-loaded polymeric nanoparticles can enhance the efficacy, selective targeting, and biodistribution of the anticancer drug at the tumor site.

Facile preparation of medical segmented poly(ester-urethane) containing uniformly sized hard segments and phosphorylcholine groups for improved hemocompatibility

In order to improve the hemocompatibility of durable medical-grade polyurethane, a novel series of segmented poly(ester-urethane)s containing uniformly sized hard segments and phosphorylcholine (PC) groups on the side chains (SPU-PCs) was prepared by a facile method. The 2-methacryloyloxyethyl phosphorylcholine (MPC) was first reacted with α-thioglycerol by Michael addition to give a diol compound (MPC-diol), then the SPU-PCs with various PC content were prepared by a one-step chain extension of the mixture of MPC-diol and poly(ε-caprolactone) diol (PCL-diol) with aliphatic diurethane diisocyanates (HBH). The chemical structures of MPC-diol and SPU-PCs were confirmed by ¹H NMR and FT-IR, and the influences of PC content on the physicochemical properties of the SPU-PC films were studied. The introduction of PC groups enhanced the degree of micro-phase separation and improved the hydrolytic degradation of the films. Due to the denser hydrogen bonds formed in the uniformly sized hard segments, the films exhibited favorable tensile properties and a slow hydrolytic degradation rate. The results of water contact angle and XPS analysis indicated that the PC groups on the flexible side chains were concentrated on the surface after contact with water. The surface hemocompatibility of the films was evaluated by testing the protein adsorption and platelet adhesion, and the results revealed that the films surfaces could dramatically suppress the protein adsorption and platelet adhesion. The PC-containing polyurethane films possessed outstanding tensile properties, low degradation rate and good surface hemocompatibility, implying their great potential for use as long-term implant or blood-contacting devices.

pH and reduction dual-responsive micelles based on novel polyurethanes with detachable poly(2-ethyl-2-oxazoline) shell for controlled release of doxorubicin

We describe a biodegradable amphiphilic polyurethane (PU) with disulfide bonds in the main chain [PEtOz-b-PU(SS)-b-PEtOz]. This multi-block PU was synthesized using poly (ε-caprolactone) diol (PCL-SS-PCL) and poly (2-ethyl-2-oxazoline) (PEtOz-OH) as soft segments, and bis (2-isocyanatoethyl) disulfide as the hard segment. Acid-sensitive PEtOz-OH was used as a hydrophilic segment for pH sensitivity. And reduction sensitivity was induced via disulfide bonds incorporated into the hydrophobic poly (ε-caprolactone) segment of the amphiphilic PUs. The system can self-assemble to form micelles responsive to pH and reducing conditions. The properties of the micelle were studied with dynamic light scattering and scanning electron microscopy. Doxorubicin (DOX) was chosen as a model drug. The in vitro release studies showed that PEtOz-b-PU(SS)-b-PEtOz micelle could degrade more rapidly and completely in a reductive and acidic environment [10 mM dl-Dithiothreitol, pH 5.0]. The methyl tetrazolium (MTT) assay and fluorescent microscopy confirmed the cytotoxicity of the DOX-loaded micelles. This work provides a promising dual-responsive drug carrier based on amphiphilic PU to achieve efficient drug delivery.

Nanofibrous scaffold from electrospinning biodegradable waterborne polyurethane/poly(vinyl alcohol) for tissue engineering application

A series of nanofibrous scaffolds, free of organic solvents, are prepared by electrospinning biodegradable waterborne polyurethane (BWPU) emulsion blending with aqueous poly(vinyl alcohol)(PVA). Tuning the proration of BWPU to PVA, various nanofibers with diameter from 370 to 964 nm are obtained. Strong intermolecular interaction existing between them benefits to the electrospun of BWPU emulsion, which is demonstrated by dynamic thermomechanical analysis and Fourier transform infrared spectroscopy. The nontoxic nanofibrous scaffolds with porous structure, which is similar to the natural extracellular matrix, favor to the attachment and proliferation of the L929 fibroblasts. Thus, the scaffolds are promising to be used as biomaterials for many natural tissues repair.

3D Printing of Cytocompatible Water-Based Light-Cured Polyurethane with Hyaluronic Acid for Cartilage Tissue Engineering Applications

Diseases in articular cartilages have affected millions of people globally. Although the biochemical and cellular composition of articular cartilages is relatively simple, there is a limitation in the self-repair ability of the cartilage. Therefore, developing strategies for cartilage repair is very important. Here, we report on a new liquid resin preparation process of water-based polyurethane based photosensitive materials with hyaluronic acid with application of the materials for 3D printed customized cartilage scaffolds. The scaffold has high cytocompatibility and is one that closely mimics the mechanical properties of articular cartilages. It is suitable for culturing human Wharton’s jelly mesenchymal stem cells (hWJMSCs) and the cells in this case showed an excellent chondrogenic differentiation capacity. We consider that the 3D printing hybrid scaffolds may have potential in customized tissue engineering and also facilitate the development of cartilage tissue engineering.

Phospholipid End-Capped Acid-Degradable Polyurethane Micelles for Intracellular Delivery of Cancer Therapeutics

Nanoscale drug carriers fabricated by phospholipid end-capped polyurethane bearing acetal backbones that degrade in acidic conditions are fabricated. These micelles effectively allow drugs to enter the blood circulation, and then disintegrate in acidic endosomes and lysosomes for intelligent delivery of payloads.

Effects of aging on the structural, mechanical, and thermal properties of the silicone rubber current transformer insulation bushing for a 500 kV substation

In order to analyze the cracking and aging reason of the silicone rubber current transformer (CT) insulation bushing used for 8 years from a 500 kV alternating current substation, characteristics including Fourier transform infrared (FTIR) spectroscopy, mechanical properties analysis, hardness, and thermo gravimetric analysis have been carried out. The FTIR results indicated that the external surface of the silicone rubber CT insulation bushing suffered from more serious aging than the internal part, fracture of side chain Si-C bond was much more than the backbone. Mechanical properties and thermal stability results illustrated that the main aging reasons were the breakage of side chain Si-C bond and the excessive cross-linking reaction of the backbone. This study can provide valuable basis for evaluating degradation mechanism and aging state of the silicone rubber insulation bushing in electric power field.

Folic acid-tethered poly(N-isopropylacrylamide)–phospholipid hybrid nanocarriers for targeted drug delivery

Folic acid-tethered poly(N-isopropylacrylamide)–phospholipid nanocarriers exhibit tumour targetability and temperature responsive Doxorubicin releasing behaviour under physiological conditions.

Synthesis and 3D printing of biodegradable polyurethane elastomer by a water-based process for cartilage tissue engineering applications

Biodegradable materials that can undergo degradation in vivo are commonly employed to manufacture tissue engineering scaffolds, by techniques including the customized 3D printing. Traditional 3D printing methods involve the use of heat, toxic organic solvents, or toxic photoinitiators for fabrication of synthetic scaffolds. So far, there is no investigation on water-based 3D printing for synthetic materials. In this study, the water dispersion of elastic and biodegradable polyurethane (PU) nanoparticles is synthesized, which is further employed to fabricate scaffolds by 3D printing using polyethylene oxide (PEO) as a viscosity enhancer. The surface morphology, degradation rate, and mechanical properties of the water-based 3D-printed PU scaffolds are evaluated and compared with those of polylactic-co-glycolic acid (PLGA) scaffolds made from the solution in organic solvent. These scaffolds are seeded with chondrocytes for evaluation of their potential as cartilage scaffolds. Chondrocytes in 3D-printed PU scaffolds have excellent seeding efficiency, proliferation, and matrix production. Since PU is a category of versatile materials, the aqueous 3D printing process developed in this study is a platform technology that can be used to fabricate devices for biomedical applications.

Synthesis and characterization of biodegradable polyurethanes with folate side chains conjugated to hard segments

In this study, a novel folate-conjugated chain extender (LDDFA) was designed and synthesized to enhance site-specific intracellular delivery of drug carriers against folate receptor overexpressing tumors.

Hydrogen-bonding-induced chain folding and vesicular assembly of an amphiphilic polyurethane

We have reported synthesis and vesicular assembly of a novel amphiphilic polyurethane with hydrophobic backbone and hydrophilic pendant carboxylic acid groups which were periodically grafted to the backbone via a tertiary amine group. In aqueous medium the polymer chain adopted a folded conformation which was stabilized by intrachain H-bonding among the urethane groups. Such a model was supported by concentration and solvent-dependent FT-IR, powder XRD, and urea-mediated "denaturation" experiments. Folded polymer chains further formed vesicular assembly which was probed by dynamic light scattering, TEM, AFM, SEM, and fluorescence microscopic studies, and dye encapsulation experiments. pH-dependent DLS and fluorescence microscopic studies revealed stable polymersome in entire tested pH window of 3.5-11.0. Zeta potential measurements showed a negatively charged surface in basic pH while a charge-neutral surface in neutral and acidic pH. MTT assay with CHO cell line indicated good cell viability.

An Approach for the Sphere-to-Rod Transition of Multiblock Copolymer Micelles

The shape of polymer micelles is important for pharmaceutical applications as drug delivery. In this article, an approach inducing sphere-to-rod transition of multiblock polyurethane micelles has been developed through introducing a second hydrophilic component phosphatidylcholine group into the polymer chains. Time-resolved dynamic light scattering (DLS), combined with transmission electron microscopy (TEM), was employed to investigate the kinetics of morphology transition. Moreover, a dissipative particle dynamics (DPD) simulation method was applied to study the mechanism of sphere-to-rod transition. These experimental and simulation studies revealed that the hydrophilic phosphatidylcholine groups can create defects on the surfaces of spherical polyurethane micelles, thus, making positive contribution to adhesive collisions and leading to the fusion of spherical micelles into rod-like micelles. This finding provides new insight into the origins of rod-like polymer micelles, which is valuable for the design and preparation of novel polymeric drug carriers with tailored properties.

Synthesis, characterization, and paclitaxel release from a biodegradable, elastomeric, poly(ester urethane)urea bearing phosphorylcholine groups for reduced thrombogenicity

Biodegradable polymers with high elasticity, low thrombogenicity, and drug loading capacity continue to be pursued for vascular engineering applications, including vascular grafts and stents. A biodegradable elastomeric polyurethane was designed as a candidate material for use as a drug-eluting stent coating, such that it was nonthrombogenic and could provide antiproliferative drug release to inhibit smooth muscle cell proliferation. A phosphorylcholine containing poly(ester urethane) urea (PEUU-PC) was synthesized by grafting aminated phosphorylcholine onto backbone carboxyl groups of a polyurethane (PEUU-COOH) synthesized from a soft segment blend of polycaprolactone and dimethylolpropionic acid, a hard segment of diisocyanatobutane and a putrescine chain extender. Poly(ester urethane) urea (PEUU) from a soft segment of polycaprolactone alone was employed as a control material. All of the synthesized polyurethanes showed high distensibility (>600%) and tensile strengths in the 20-35 MPa range. PEUU-PC experienced greater degradation than PEUU or PEUU-COOH in either a saline or lipase enzyme solution. PEUU-PC also exhibited markedly inhibited ovine blood platelet deposition compared with PEUU-COOH and PEUU. Paclitaxel loaded in all of the polymers during solvent casting continued to release for 5 d after a burst release in a 10% ethanol/PBS solution, which was utilized to increase the solubility of the releasate. Rat smooth muscle cell proliferation was significantly inhibited in 1 wk cell culture when releasate from the paclitaxel-loaded films was present. Based on these results, the synthesized PEUU-PC has promising functionality for use as a nonthrombogenic, drug eluting coating on metallic vascular stents and grafts.

Copolymer coatings consisting of 2-methacryloyloxyethyl phosphorylcholine and 3-methacryloxypropyl trimethoxysilane via ATRP to improve cellulose biocompatibility

AB diblock copolymers comprised of poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) and poly(3-methacryloxypropyl trimethoxysilane) (PMTSi) segments, which are used for biocompatible coatings, were investigated. Block copolymers with various compositions were synthesized by atomic transfer radical polymerization (ATRP). The obtained copolymers were dissolved in an ethanol solution, and dynamic light scattering showed that all block copolymers were capable of existing as micelles. After a convenient "one-step" reaction, the cellulose membranes could be covalently modified by these copolymers with stable chemical bonds (C-O-Si and Si-O-Si). Block copolymers with different PMPC chain length were applied to surface modification to find the most suitable copolymer. The functional MPC density can be controlled by adjusting the ratio of the two monomers (MPC and MTSi), which also affect surface properties, including the surface contact angle, surface morphology, and number of functional PC groups. The low-fouling properties were measured by protein adsorption, platelet adhesion and activation, and cell adhesion. Protein adsorption of bovine serum albumin (BSA), fibrinogen, and human plasma were also tested and a moderate monomer composite was attained. The protein adsorption behavior on the novel interfaces depends both on MPC density and PMPC chain length. Platelet adhesion and activation were reduced on all the modified surfaces. The adhesion of Human Embryonic Kidney 293 (293T) cells on the coated surfaces also decreased.

Strategies in biomimetic surface engineering of nanoparticles for biomedical applications

Engineered nanoparticles (NPs) play an increasingly important role in biomedical sciences and in nanomedicine. Yet, in spite of significant advances, it remains difficult to construct drug-loaded NPs with precisely defined therapeutic effects, in terms of release time and spatial targeting. The body is a highly complex system that imposes multiple physiological and cellular barriers to foreign objects. Upon injection in the blood stream or following oral administation, NPs have to bypass numerous barriers prior to reaching their intended target. A particularly successful design strategy consists in masking the NP to the biological environment by covering it with an outer surface mimicking the composition and functionality of the cell's external membrane. This review describes this biomimetic approach. First, we outline key features of the composition and function of the cell membrane. Then, we present recent developments in the fabrication of molecules that mimic biomolecules present on the cell membrane, such as proteins, peptides, and carbohydrates. We present effective strategies to link such bioactive molecules to the NPs surface and we highlight the power of this approach by presenting some exciting examples of biomimetically engineered NPs useful for multimodal diagnostics and for target-specific drug/gene delivery applications. Finally, critical directions for future research and applications of biomimetic NPs are suggested to the readers.