New polyimides incorporated with diphenylpyrenylamine unit as fluorophore and redox‐chromophore

A comparative study of redox-active, ambipolar electrochromic triphenylamine-based polyimides prepared by electrochemical polymerization and conventional polycondensation methods

The spectroscopic, electrochemical and electrochromic properties of polyimides with tetraphenylbenzidine (TPB) units prepared by electropolymerization and polycondensation were compared.

Synthesis and characterization of novel fluorinated pyridine-based polyimides derived from 4-(4-trifluoromethylphenyl)-2,6-bis(4-aminophenyl)pyridine and dianhydrides

A series of new fluorinated pyridine-based polyimides (PIs) was synthesized by polycondensation of 4-(4-trifluoromethylphenyl)-2,6-bis(4-aminophenyl)pyridine with various aromatic dianhydrides in N, N-dimethylacetamide (DMAc) via the conventional two-step method. The inherent viscosities of the resulting poly(amic acid)s and PIs were 0.54–0.94 and 0.58–0.88 dLg−1, respectively. The obtained PIs were predominantly amorphous and soluble in polar solvents such as N-methyl-2-pyrrolidone, N, N-dimethylformamide, and DMAc at room temperature or upon heating at 70°C. They also displayed good thermal stability with the glass transition temperature of 324–416°C, the temperature at 5% weight loss of 546–584°C, and the residue of 58–69% at 750°C under nitrogen, as well as outstanding mechanical properties with tensile strengths of 69132 MPa, tensile moduli of 1.1–2.0 GPa, and elongations at break of 7–27%. Meanwhile, these PI films had dielectric constants of 2.95–3.22 (1 MHz), low water uptake 0.44–0.71%, and high optical transparency with the ultraviolet cutoff wavelength in the 388–406 nm range and the wavelength of 80% transparency in the range of 550–680 nm.

Electrochromic and electrofluorochromic polyimides with fluorene-based triphenylamine

A series of novel polyimides (PIs) based on N,N-di(4-aminophenyl)-2-amino-9,9-dimethylfluorene and various dianhydrides were synthesized. These PIs were amorphous and readily soluble in many solvents. They displayed outstanding thermal stability and high glass transition temperatures (269–374°C). The polymer films showed reversible electrochemical redox and satisfactory electrochromic performance with long-term stability, high coloration efficiency, and acceptable switching times. The PI derived from 1,2,4,5-cyclohexanetetracarboxylic dianhydride exhibited maximum fluorescence at 400 nm with quantum yields up to 28.1%. Furthermore, the fluorescence can be effectively electroswitched between “on” and “off” states, exhibiting a high contrast ratio of 75.

Novel polyamides with fluorene-based triphenylamine: electrofluorescence and electrochromic properties

A series of novel organosoluble polyamides (4a–4e) bearing fluorene-based triphenylamine unit were prepared. These polyamides showed improved stability of electrochromic and electro-switchable fluorescence properties.