Magnetic poly( N ‐propargylacrylamide) microspheres: Preparation by precipitation polymerization and use in model click reactions

Chondrogenic potential of macroporous biodegradable cryogels based on synthetic poly(α-amino acids)

In this study, the potential of highly porous hydrogels based on biodegradable synthetic poly(α-amino acids) to support proliferation and chondrogenesis of human dental pulp stem cells (hDPSCs) was investigated. Covalently crosslinked gels with permanent pores were formed under cryogenic conditions by free-radical copolymerization of poly[N⁵-(2-hydroxyethyl)-l-glutamine-stat-N⁵-(2-methacryloyl-oxy-ethyl)-l-glutamine] (PHEG-MA) with 2-hydroxyethyl methacrylate (HEMA) and N-propargyl methacrylamide (PrMAAm) as minor co-monomers. PrMAAm provided alkyne groups for modifying the gels with cell-supporting moieties (RGDS peptides) by the azide-alkyne "click"-reaction. Two types of gels with different compressive moduli were prepared. Each type was modified with two different concentrations of RGDS peptide. X-ray computed nanotomography (nanoCT) was used to visualize and analyze the 3D-structure of the cryogels. It was shown that modifying the PHEG-MA cryogels within the range of RGDS concentrations examined here had a positive effect on the proliferation of hDPSCs. Immunofluorescence staining for collagen type 2 and aggrecan proved that there was differentiation of hDPSCs into chondrocytes.

Copper ferrite nanoparticle modified starch as a highly recoverable catalyst for room temperature click chemistry: multicomponent synthesis of 1,2,3-triazoles in water

Highly water dispersible CuFe₂O₄@Starch catalyzed click reaction.

RGDS- and TAT-Conjugated Upconversion of NaYF4:Yb(3+)/Er(3+)&SiO2 Nanoparticles: In Vitro Human Epithelioid Cervix Carcinoma Cellular Uptake, Imaging, and Targeting

Starting NaYF4:Yb(3+)/Er(3+) nanoparticles with size tuned from 24 to 33 nm were prepared by high-temperature coprecipitation of lanthanide chlorides in high-boiling organic solvents. To enhance colloidal stability in aqueous medium, an aminosilica shell was introduced on the surface by hydrolysis and condensation of tetramethyl orthosilicate and (3-aminopropyl)trimethoxysilane using a reverse microemulsion technique; to form alkyne groups, reaction with 4-pentynoic acid followed. Finally, the cell adhesive and cell penetrating azidopentanoyl-GGGRGDSGGGY-NH2 (RGDS) and azidopentanoyl-GGGRKKRRQRRR-NH2 (TAT) peptides were conjugated to the upconversion particles via Cu(I)-catalyzed alkyne-azide cycloaddition. The concentrations of the peptides bound to the nanoparticle surfaces and amount of adsorbed residual Cu(I) catalyst were determined using an (125)I-radiolabeled RGDS peptide and a (64)Cu(I)-doped catalyst, respectively. Targeting and uptake of the RGDS- and TAT-conjugated NaYF4:Yb(3+)/Er(3+)&SiO2 nanoparticles by human cervix carcinoma HeLa cells were monitored by confocal microscopy. RGDS-conjugated nanoparticle probes were mainly localized on the cell plasma membrane due to specific binding of the peptide to the corresponding integrins. In contrast, the TAT-conjugated nanoparticles were able to cross the cell membrane and accumulate in the cell cytoplasm. Thus, this new peptide bioconjugation approach supported both extra- and intracellular nanoparticle uptake, enabling targeting and imaging of the specific tumor phenotypes.

RGDS- and SIKVAVS-Modified Superporous Poly(2-hydroxyethyl methacrylate) Scaffolds for Tissue Engineering Applications

Three-dimensional hydrogel supports for mesenchymal and neural stem cells (NSCs) are promising materials for tissue engineering applications such as spinal cord repair. This study involves the preparation and characterization of superporous scaffolds based on a copolymer of 2-hydroxyethyl and 2-aminoethyl methacrylate (HEMA and AEMA) crosslinked with ethylene dimethacrylate. Ammonium oxalate is chosen as a suitable porogen because it consists of needle-like crystals, allowing their parallel arrangement in the polymerization mold. The amino group of AEMA is used to immobilize RGDS and SIKVAVS peptide sequences with an N-γ-maleimidobutyryloxy succinimide ester linker. The amount of the peptide on the scaffold is determined using ¹²⁵ I radiolabeled SIKVAVS. Both RGDS- and SIKVAVS-modified poly(2-hydroxyethyl methacrylate) scaffolds serve as supports for culturing human mesenchymal stem cells (MSCs) and human fetal NSCs. The RGDS sequence is found to be better for MSC and NSC proliferation and growth than SIKVAVS.

Cell adhesion and growth enabled by biomimetic oligopeptide modification of a polydopamine-poly(ethylene oxide) protein repulsive surface

Protein-repulsive surfaces modified with ligands for cell adhesion receptors have been widely developed for controlling the cell adhesion and growth in tissue engineering. However, the question of matrix production and deposition by cells on these surfaces has rarely been addressed. In this study, protein-repulsive polydopamine-poly(ethylene oxide) (PDA-PEO) surfaces were functionalized with an RGD-containing peptide (RGD), with a collagen-derived peptide binding fibronectin (Col), or by a combination of these peptides (RGD + Col, ratio 1:1) in concentrations of 90 fmol/cm(2) and 700 fmol/cm(2) for each peptide type. When seeded with vascular endothelial CPAE cells, the PDA-PEO surfaces proved to be completely non-adhesive for cells. On surfaces with lower peptide concentrations and from days 1 to 3 after seeding, cell adhesion and growth was restored practically only on the RGD-modified surface. However, from days 3 to 7, cell adhesion and growth was improved on surfaces modified with Col and with RGD + Col. At higher peptide concentrations, the cell adhesion and growth was markedly improved on all peptide-modified surfaces in both culture intervals. However, the collagen-derived peptide did not increase the expression of fibronectin in the cells. The deposition of fibronectin on the material surface was generally very low and similar on all peptide-modified surfaces. Nevertheless, the RGD + Col surfaces exhibited the highest cell adhesion stability under a dynamic load, which correlated with the highest expression of talin and vinculin in the cells on these surfaces. A combination of RGD + Col therefore seems to be the most promising for surface modification of biomaterials, e.g. vascular prostheses.

Macroporous Biodegradable Cryogels of Synthetic Poly(α-amino acids)

We present an investigation of the preparation of highly porous hydrogels based on biodegradable synthetic poly(α-amino acid) as potential tissue engineering scaffolds. Covalently cross-linked gels with permanent pores were formed under cryogenic conditions by free-radical copolymerization of poly[N(5)-(2-hydroxyethyl)-L-glutamine-stat-N(5)-(2-methacryloyl-oxy-ethyl)-L-glutamine] (PHEG-MA) with 2-hydrohyethyl methacrylate (HEMA) and, optionally, N-propargyl acrylamide (PrAAm) as minor comonomers. The morphology of the cryogels showed interconnected polyhedral or laminar pores. The volume content of communicating water-filled pores was >90%. The storage moduli of the swollen cryogels were in the range of 1-6 kPa, even when the water content was >95%. The enzymatic degradation of a cryogel corresponded to the decrease in its storage modulus during incubation with papain, a model enzyme with specificity analogous to wound-healing enzymes. It was shown that cryogels with incorporated alkyne groups can easily be modified with short synthetic peptides using azide-alkyne cycloaddition "click" chemistry, thus providing porous hydrogel scaffolds with biomimetic features.

Nano-colloid printing of functionalized PLA-b-PEO copolymers: tailoring the surface pattern of adhesive motif and its effect on cell attachment

In this study, we investigate the preparation of surface pattern of functional groups on poly(lactide) (PLA) surfaces through the controlled deposition of core-shell self-assemblies based on functionalized PLA-b-PEO amphiphilic block copolymers from selective solvents. Through grafting RGDS peptide onto the functionalized copolymer surface, the presented approach enables to prepare PLA surfaces with random and clustered spatial distribution of adhesive motifs. The proposed topography of the adhesion motif was proved by atomic force microscopy techniques using biotin-tagged RGDS peptide grafted on the surface and streptavidin-modified gold nanospheres which bind the tagged RGDS peptides as a contrast agent. The cell culture study under static and dynamic conditions with MG63 osteosarcoma cell line showed that the clustered distribution of RGDS peptides provided more efficient initial cell attachment and spreading, and resistance to cell detachment under dynamic culture compared to randomly distributed RGDS motif when with the same average RGDS peptide concentration.

Fluorescent nanodiamonds embedded in biocompatible translucent shells

High pressure high temperature (HPHT) nanodiamonds (NDs) represent extremely promising materials for construction of fluorescent nanoprobes and nanosensors. However, some properties of bare NDs limit their direct use in these applications: they precipitate in biological solutions, only a limited set of bio-orthogonal conjugation techniques is available and the accessible material is greatly polydisperse in shape. In this work, we encapsulate bright 30-nm fluorescent nanodiamonds (FNDs) in 10-20-nm thick translucent (i.e., not altering FND fluorescence) silica shells, yielding monodisperse near-spherical particles of mean diameter 66 nm. High yield modification of the shells with PEG chains stabilizes the particles in ionic solutions, making them applicable in biological environments. We further modify the opposite ends of PEG chains with fluorescent dyes or vectoring peptide using click chemistry. High conversion of this bio-orthogonal coupling yielded circa 2000 dye or peptide molecules on a single FND. We demonstrate the superior properties of these particles by in vitro interaction with human prostate cancer cells: while bare nanodiamonds strongly aggregate in the buffer and adsorb onto the cell membrane, the shell encapsulated NDs do not adsorb nonspecifically and they penetrate inside the cells.

Uniform polymer microspheres: monodispersity criteria, methods of formation and applications

For many applications, polymer microspheres (MS) should possess a monodisperse size distribution. With such uniformity they are able to deliver precise amounts of drug per MS, optimize the release kinetics of an encapsulated drug, obtain repeatable in vivo biodistributions to different organs and tissues, and obtain the maximum protection of (protein) drugs from degradation. This review classifies monodisperse polymer MS according to their methods of production and gives examples of the formation of uniform MS and their applications in the medical field. In the literature, the term ‘monodisperse’ is often used inaccurately, and this article attempts to rectify this by clearly defining monodispersity in terms of the coefficient of variation and the polydispersity index, the two statistical quantities most frequently used to describe the size distribution of MS.