Neurodevelopmental changes in Drosophila melanogaster are restored by treatment with lutein-loaded nanoparticles: Positive modulation of neurochemical and behavioral parameters

Neurodevelopmental disorders, such as autism spectrum disorder (ASD) and attention deficit hyperactivity disorder (ADHD), are characterized by persistent changes in communication and social interaction, as well as restricted and stereotyped patterns of behavior. The complex etiology of these disorders possibly combines the effects of multiple genes and environmental factors. Hence, exposure to insecticides such as imidacloprid (IMI) has been used to replicate the changes observed in these disorders. Lutein is known for its anti-inflammatory and antioxidant properties and is associated with neuroprotective effects. Therefore, the aim of this study was to evaluate the protective effect of lutein-loaded nanoparticles, along with their mechanisms of action, on Drosophila melanogaster offspring exposed to IMI-induced damage. To simulate the neurodevelopmental disorder model, flies were exposed to a diet containing IMI for 7 days. Posteriorly, their offspring were exposed to a diet containing lutein-loaded nanoparticles for a period of 24 h, and male and female flies were subjected to behavioral and biochemical evaluations. Treatment with lutein-loaded nanoparticles reversed the parameters of hyperactivity, aggressiveness, social interaction, repetitive movements, and anxiety in the offspring of flies exposed to IMI. It also protected markers of oxidative stress and cell viability, in addition to preventing the reduction of Nrf2 and Shank3 immunoreactivity. These results demonstrate that the damage induced by exposure to IMI was restored through treatment with lutein-loaded nanoparticles, elucidating lutein's mechanisms of action as a therapeutic agent, which, after further studies, can become a co-adjuvant in the treatment of neurodevelopmental disorders, such as ASD and ADHD.

Poly(ε-caprolactone)-Based Graft Copolymers: Synthesis Methods and Applications in the Biomedical Field: A Review

Synthetic biopolymers are attractive alternatives to biobased polymers, especially because they rarely induce an immune response in a living organism. Poly ε-caprolactone (PCL) is a well-known synthetic aliphatic polyester universally used for many applications, including biomedical and environmental ones. Unlike poly lactic acid (PLA), PCL has no chiral atoms, and it is impossible to play with the stereochemistry to modify its properties. To expand the range of applications for PCL, researchers have investigated the possibility of grafting polymer chains onto the PCL backbone. As the PCL backbone is not functionalized, it must be first functionalized in order to be able to graft reactive groups onto the PCL chain. These reactive groups will then allow the grafting of new reagents and especially new polymer chains. Grafting of polymer chains is mainly carried out by "grafting from" or "grafting onto" methods. In this review we describe the main structures of the graft copolymers produced, their different synthesis methods, and their main characteristics and applications, mainly in the biomedical field.

Recent advances in the self-assembly of sparsely grafted amphiphilic copolymers in aqueous solution

This review describes the self-assembly of sparsely grafted amphiphilic copolymers and highlights the effects of structural factors and solvents on their self-assembly behaviour.

Amphiphilic copolymers in biomedical applications: Synthesis routes and property control

The request of new materials, matching strict requirements to be applied in precision and patient-specific medicine, is pushing for the synthesis of more and more complex block copolymers. Amphiphilic block copolymers are emerging in the biomedical field due to their great potential in terms of stimuli responsiveness, drug loading capabilities and reversible thermal gelation. Amphiphilicity guarantees self-assembly and thermoreversibility, while grafting polymers offers the possibility of combining blocks with various properties in one single material. These features make amphiphilic block copolymers excellent candidates for fine tuning drug delivery, gene therapy and for designing injectable hydrogels for tissue engineering. This manuscript revises the main techniques developed in the last decade for the synthesis of amphiphilic block copolymers for biomedical application. Strategies for fine tuning the properties of these novel materials during synthesis are discussed. A deep knowledge of the synthesis techniques and their effect on the performance and the biocompatibility of these polymers is the first step to move them from the lab to the bench. Current results predict a bright future for these materials in paving the way towards a smarter, less invasive, while more effective, medicine.

A review of emerging bone tissue engineering via PEG conjugated biodegradable amphiphilic copolymers

Defects in bones can be caused by a plethora of reasons, such as trauma or illness, and in many cases, it poses challenges to the current treatment approaches for bone repair. With increasing demand of bone bioengineering in tissue transplant, there is a need to source for sustainable solutions to induce bone regeneration. Polymeric biomaterials have been identified as a promising approach due to its excellent biocompatibility and controllable biodegradability. Specifically, poly(ethylene glycol) (PEG) is one of the most commonly investigated polymer for use in bio-related application due to its bioinertness and versatility. Furthermore, the hydrophilic nature enables it to be incorporated with hydrophobic but biodegradable polymers like, polylactide (PLA) and polycaprolactone (PCL), to create an amphiphilic polymer. This article reviews the recent synthetic strategies available for the construction of PEG conjugated polymeric system, analysis of PEG influence on the material properties, and provides an overview of its application in bone engineering.

PEG-PCL-based nanomedicines: A biodegradable drug delivery system and its application

The lack of efficient therapeutic options for many severe disorders including cancer spurs demand for improved drug delivery technologies. Nanoscale drug delivery systems based on poly(ethylene glycol)-poly(ε-caprolactone) copolymers (PEG-PCL) represent a strategy to implement therapies with enhanced drug accumulation at the site of action and decreased off-target effects. In this review, we discuss state-of-the-art nanomedicines based on PEG-PCL that have been investigated in a preclinical setting. We summarize the various synthesis routes and different preparation methods used for the production of PEG-PCL nanoparticles. Additionally, we review physico-chemical properties including biodegradability, biocompatibility, and drug loading. Finally, we highlight recent therapeutic applications investigated in vitro and in vivo using advanced systems such as triggered release, multi-component therapies, theranostics, or gene delivery systems.

An injectable drug-loaded hydrogel based on a supramolecular polymeric prodrug

We reported a novel injectable doxorubicin-loaded hydrogel based on host-guest interaction and Schiff's base reaction. A supramolecular polymeric prodrug was prepared through the inclusion of adamantane-modified doxorubicin into the β-cyclodextrin cavity on the polyaldehyde dextran chain, which was in situ crosslinked by carboxymethyl chitosan.

Ultrasound responsive block copolymer micelle of poly(ethylene glycol)-poly(propylene glycol) obtained through click reaction

The well-defined amphiphilic poly(ethylene glycol)-block-poly(propylene glycol) copolymer containing 1, 2, 3-triazole moiety and multiple ester bonds (PEG-click-PPG) was prepared by click reaction strategy. The PEG-click-PPG copolymer can self-assemble into spherical micelles in aqueous solution. It is found that high intensity focused ultrasound (HIFU) can open the copolymer PEG-click-PPG micelles and trigger the release of the payload in the micelle. The multiple ester bonds introduced in the junction point of the copolymer chain through click reactions were cleaved under HIFU, and leads to the disruption of the copolymer micelle and fast release of loaded cargo. The click reaction provides a convenient way to construct ultrasound responsive copolymer micelles with weak bonds.

PCL–PEG graft copolymers with tunable amphiphilicity as efficient drug delivery systems

Efficient drug delivery systems are prepared, thanks to the fine-tuning of the amphiphilicity and architecture of PCL–PEG graft copolymers via a simple photochemical approach.

Reduction/pH dual-responsive nano-prodrug micelles for controlled drug delivery

We provided a facile strategy to fabricate reduction/pH dual-responsive nano-prodrug micelles for controlled drug delivery.

Injectable camptothecin conjugated hydrogels with simultaneous drug release and degradation

Novel injectable camptothecin conjugated hydrogels with simultaneous drug release and degradation properties were prepared, which show significant cytotoxicity to HepG2 cells, and could be a potential candidate for intratumor drug delivery.

Injectable cationic hydrogels with high antibacterial activity and low toxicity

We prepared injectable cationic hydrogels with strong antibacterial activity and remarkably low toxicity by in situ thiol–ene “click” reaction between dimethacrylate terminated poly(hexamethylene guanidine) (PHMGDMA) and poly[oligo(ethylene) glycol mercaptosuccinate] (POEGMS) under physiological conditions.

Surface-Functionalized Biodegradable Nanoparticles Consisting of Amphiphilic Graft Polymers Prepared by Radical Copolymerization of 2-Methylene-1,3-Dioxepane and Macromonomers

Biodegradable polyester-based nanoparticles were prepared by the precipitation of amphiphilic graft copolymers, which were prepared by the ring-opening radical copolymerization of 2-methylene-1,3-dioxepane (MDO) and amphiphilic macromonomers. The diameter of the nanoparticles was controlled by the degree of grafting and the molecular weight of the grafting oligomer. PMDO-g-poly(ethylene glycol) nanoparticles were degraded by the alkaline hydrolysis of the polyester backbone. Although the colloidal stability of nanoparticles was retained due to the reorientation of the PEG chains during hydrolysis, the size of the nanoparticles decreased with increasing hydrolysis time. We also prepared PMDO-g-poly(N-isopropylacrylamide) nanoparticles, which show aggregation in response to increasing temperature.

An injectable drug-loaded hydrogel using a “clickable” amphiphilic triblock copolymer as a precursor

A PCL-POEGM-PCL amphiphilic triblock copolymer was facilely synthesized in “one pot”, which can disperse hydrophobic drugs in aqueous solution and be crosslinked by poly[oligo(ethylene glycol)mercaptosuccinate] (POEGMS) under physiological conditions.

Sustained drug release from an ultrathin hydrogel film

We reported a facile strategy to prepare a camptothecin-loaded ultrathin hydrogel film, which showed a sustained release of camptothecin in PBS.

From nanospheres to micelles: simple control of PCL-g-PEG copolymers’ amphiphilicity through thiol–yne photografting

A unique combination of polyester post-polymerization modification and photoradical thiol–yne addition is reported for the synthesis of amphiphilic degradable graft copolymers with controlled compositions, used to prepare micelles or nanospheres.

Reduction-triggered release of paclitaxel from in situ formed biodegradable core-cross-linked micelles

We provide a facile strategy to prepare redox-responsive core-crosslinked micelles for the controlled release of paclitaxel.

A facile strategy to prepare redox-responsive amphiphilic PEGylated prodrug with high drug loading content and low critical micelle concentration

A redox-responsive amphiphilic polymeric prodrug was synthesized in a facile way by polycondensation of oligo(ethylene glycol) with dicarboxylic acids including malic acid and 3,3'-dithiodipropionic acid , followed by esterification with ibuprofen, which was used as a model drug. Because of its amphiphilic nature and relatively high molecular weight, this polymeric prodrug can form stable micelles in aqueous media with a low critical micellar concentration (CMC). Free ibuprofen molecules can be steadily incorporated into the core of these micelles with a surprisingly high loading content (38.9 wt%), owing to hydrophobic interaction and π-π stacking with the ibuprofen moieties in the copolymer. The in vitro release results indicate that there was a relatively slow and sustained release of the conjugated ibuprofen moieties, while encapsulated ibuprofen molecules showed a rapid release. Furthermore, for both the conjugated ibuprofen and the encapsulated ibuprofen there was an accelerated release in the presence of 10 mM dl-dithiothreitol due to cleavage of the disulfide bonds, which lead to disassociation of the micelles. Notably, this prodrug was revealed to have excellent cell compatibilities via a cell counting kit-8 (CCK-8) assay. Confocal laser scanning microscope observations indicated that the micelles based on the polymeric prodrug can be taken up quickly by cells and present a redox-responsive drug release in cytoplasm. This kind of polymeric nanocarrier with a high drug loading content, low CMC, excellent biocompatibility and rapid response to a reductive environment may have tremendous scope in the area of controlled drug delivery.

Lipase-catalyzed synthesis of azido-functionalized aliphatic polyesters towards acid-degradable amphiphilic graft copolymers

A series of novel aliphatic polyesters with azido functional groups were synthesized via the direct lipase-catalyzed polycondensation of dialkyl diester, diol and 2-azido-1,3-propanediol (azido glycerol) using immobilized lipase B from Candida antarctica (CALB). The effects of polymerization conditions including reaction time, temperature, enzyme amount, substrates and monomer feed ratio on the molecular weights of the products were studied. The polyesters with pendant azido groups were characterized by (1)H NMR, (13)C NMR, 2D NMR, FTIR, GPC and DSC. Alkyne end-functionalized poly(ethylene glycol) containing a cleavable acetal group was then grafted onto the polyester backbone by copper-catalyzed azide-alkyne cycloaddition (CuAAC, click chemistry). Using fluorescence spectroscopy, dynamic light scattering (DLS) and transmission electron microscopy (TEM), these amphiphilic graft copolymers were found to readily self-assemble into nanosized micelles in aqueous solution with critical micelle concentrations between 0.70 and 1.97 mg L(-1), and micelle sizes from 20-70 nm. The degradation of these polymers under acidic conditions was investigated by GPC and (1)H NMR spectroscopy. Cell cytotoxicity tests indicated that the micelles had no apparent cytotoxicity to Bel-7402 cells, suggesting their potential as carriers for controlled drug delivery.