Boron-Catalyzed C1 Copolymerization of Arsonium and Sulfoxonium Ylides toward Unrepresented Structures and Fluorescence Properties

The first synthesis of well-defined poly(methylene-co-1,1-diphenylpropenenylene) (C1-co-C1'), equivalent to poly(ethylene-co-diphenylbutadiene) copolymers was accomplished by C1 copolymerization of novel diphenylpropenyl triphenyl arsonium ylides (Ph2AY) and dimethylsulfoxonium methylide (Me2SY) using B-thexylborepane as initiator. All polymerization conditions, including feed ratio, temperature, and reaction time, were optimized. A series of photoluminescent poly(ethylene-co-diphenylbutadiene)s were synthesized at different feed ratios, opening a new synthetic horizon for poly(ethylene-co-disubstitutedbutadiene) copolymers. Notably, a new C1 segment, arising from a double bond rearrangement, was confirmed by NMR, resulting in an unprecedented two-monomer three-structure random terpolymer. An unexpected red-shift phenomenon in the fluorescence spectra was observed with increasing the ratio of Ph2AY in the copolymer. This shift is attributed to the aggregation of diphenylbutadiene segment, similar to through-space conjugation (TSC), likely induced by a decrease in the crystallinity of copolymers. Furthermore, another disubstituted allylic triphenyl arsonium ylides, (E)-2-phenylbutenyl triphenyl arsonium ylide (MePhAY) was also synthesized and investigated. These additional compounds expand the knowledge and the potential applications of such copolymerization techniques in advanced materials.

Steric Hindrance Drives the Boron-Initiated Polymerization of Dienyltriphenylarsonium Ylides to Photoluminescent C5-Polymers

A series of alkyl-subsituted dienyltriphenylarsonium ylides were synthesized and used as monomers in borane-initiated polymerization to obtain practically pure C5-polymers (main-chain grows by five carbon atoms at a time). The impact of triethylborane (Et3 B), tributylborane (Bu3 B), tri-sec-butylborane (s-Bu3 B), and triphenylborane (Ph3 B) initiators on C5 polymerization was studied. Based on NMR and SEC results, we have shown that all synthesized polymers have C5 units with a unique unsaturated backbone where two conjugated double bonds are separated by one methylene. The synthesized C5-polymers possess predictable molecular weights and narrow molecular weight distributions (Mn,NMR =2.8 -11.9 kg mol-1 , Ð=1.04-1.24). It has been found that increasing the steric hindrance of both the monomer and the initiator can facilitate the formation of more C5 repeating units, thus driving the polymerization to almost pure C5-polymer (up to 95.8 %). The polymerization mechanism was studied by 11 B NMR and confirmed by DFT calculations. The synthesized C5-polymers are amorphous with tunable glass-transition temperatures by adjusting the substituents of monomers, ranging from +30.1 °C to -38.4 °C. Furthermore, they possess blue photoluminescence that changes to yellow illuminating the polymers for 5 days with UV radiation of 365 nm (IIE, isomerization induced emission).

Boron-Catalyzed Polymerization of Dienyltriphenylarsonium Ylides: On the Way to Pure C5 Polymerization

The first C5 polymerization is reported, where the main-chain is growing by five carbon atoms of the monomer at a time. Three dienyltriphenylarsonium ylide monomers were synthesized and polymerized with triethylborane as an initiator, leading to random terpolymers (C1, C3, C5) with mainly C5 repeating units (up to 84.1 %). It has been found that the methyl group (electron-donating substituent) on the conjugated double bond of the ylides facilitates the formation of C5 segments. A mechanism was proposed based on NMR characterization and DFT calculations. The high C5 content ensures that things are on the right track for pure C5 homopolymerization.

Terpolymers from Borane-Initiated Copolymerization of Triphenyl Arsonium and Sulfoxonium Ylides: An Unexpected Light Emission

The first synthesis of well-defined poly[(phenylmethylene-co-methylpropenylene)-b-methylene, [(C1-co-C3)-b-C1], terpolymers was achieved by one-pot borane-initiated random copolymerization of ω-methylallyl (C3 units, chain is growing by three carbon atoms at a time) and benzyltriphenylarsonium (C1 units, chain is growing by one carbon atom at a time) ylides, followed by polymerization of sulfoxonium methylide (C1 units). Other substituted arsonium ylides, such as prenyltriphenyl, propyltriphenyl and (4-fluorobenzyl)triphenyl can also be used instead of benzyltriphenylarsonium. The obtained terpolymers are well-defined, possess a predictable molecular weight and low polydispersity (Mn,NMR =1.83-9.68×103  g mol-1 , Đ=1.09-1.22). An unexpected light emission phenomenon was discovered in these non-conjugated terpolymers, as confirmed by fluorescence and NMR spectroscopy. This phenomenon can be explained by the isomerization of the double bonds of allylic monomeric units along the chain of the terpolymers (isomerization-induced light emission).

End-functional polyolefins for block copolymer synthesis

Polyolefins that contain polar functionalities are highly desired because they could extend the range of applications of these low production cost materials by modifying surface and other interfacial properties. Block copolymers containing polyolefin and polar segments are among the most sought-after architectures because of their ability to span the phase boundaries. This review focusses on the end-functionalisation of polyolefins by catalytic olefin polymerisation processes, almost invariably by metal-catalysed routes, followed by the growth polar blocks by various polymerisation techniques.

Chemoenzymatic Synthesis of Nitrogen Polymers with Biomedical Applications Catalyzed by Lipases

The application of Candida antarctica lipase B as catalyst in the synthesis of two examples of nitrogen polymers is described. Firstly, we report a novel linear polyamidoamine oligomer, obtained by polymerization of ethyl acrylate and N-methyl-1,3-diaminopropane, catalyzed by Candida antarctica lipase B immobilized on polypropylene. The second part of the chapter describes an efficient route for the synthesis of a novel β-peptoid oligomer with hydroxyalkyl pendant groups in the nitrogen atom, through the polymerization of ethyl N-(2-hydroxyethyl)-β-alaninate catalyzed by Candida antarctica lipase B physically adsorbed within a macroporous poly(methyl methacrylate-co-butyl methacrylate) resin. Moreover, two derivatives of the β-peptoid oligomer were prepared: by acetylation and by grafting polycaprolactone. This last process was performed through ring-opening polymerization of caprolactone from the β-peptoid pendant hydroxyl groups and afforded a brush copolymer. The products were blended with polycaprolactone to make films by solvent casting. The inclusion of the acyl derivatives of the β-peptoid to polycaprolactone affected the morphology of the film yielding micro- and nanostructured patterns. The obtained products showed biomedical applications.

Well-defined triblock copolymers of polyethylene with polycaprolactone or polystyrene using a novel difunctional polyhomologation initiator

α,ω-Dihydroxy polyethylene, valuable precursor for the synthesis of polyethylene-based terpolymers with polar blocks, was synthesized by polyhomologation of dimethylsulfoxonium methylide with 9-thexyl-9-BBN, a novel difunctional initiator with two active and one blocked sites.

Synthesis of polymethylene-b-poly(vinyl acetate) block copolymer via visible light induced radical polymerization and its application

Polymethylene-b-poly(vinyl acetate) block copolymers were synthesized by polyhomologation of ylides and visible light-induced degenerative iodine transfer polymerization of vinyl acetate.

C1 polymerization: a unique tool towards polyethylene-based complex macromolecular architectures

The recent developments in organoborane initiated C1 polymerization of ylides open unique horizons towards perfectly linear polymethylenes (equivalent to PE) and PE-based complex structures. This review summarizes research on conventional and newly discovered initiators/ylides, as well as initial efforts on C3 polymerization.

Allyl borates: a novel class of polyhomologation initiators

Allyl borates, a new class of monofunctional polyhomologation initiators, are reported. Upon increasing the ratio [ylide]/[B] the PM molecular weight increases correspondingly. The initiation mechanism was elucidated by¹H and¹¹B NMR.

Boron-Catalyzed C3-Polymerization of ω-2-Methyl Allylarsonium Ylide and Its C3/C1 Copolymers with Dimethylsulfoxonium Methylide

A novel arsonium ylide, ω-2-methylallylarsonium ylide, was synthesized and used as monomer for polyhomologation with triethyborane as initiator. It was found that the terminal methyl group leads to C3 polymerization. Furthermore, the copolyhomologation of arsonium ylide with dimethylsulfoxonium methylide is reported for the first time.

Well-defined polyethylene-based graft terpolymers by combining nitroxide-mediated radical polymerization, polyhomologation and azide/alkyne “click” chemistry

Novel well-defined polyethylene-based graft terpolymers were synthesized via the “grafting onto” strategy by combining NMP, polyhomologation and CuAAC “click” chemistry.

Living cationic polymerization and polyhomologation: an ideal combination to synthesize functionalized polyethylene–polyisobutylene block copolymers

A series of hydroxyl-terminated polyisobutylene-b-polyethylene (PIB-b-PE-OH) copolymers were synthesized by combining living cationic polymerization and polyhomologation.

Well-defined 4-arm stars with hydroxy-terminated polyethylene, polyethylene-b-polycaprolactone and polyethylene-b-(polymethyl methacrylate)2 arms

Bis-boron-thexyl-silaboracycle was used to initiate the polyhomologation of dimethylsulfoxonium methylide to afford well-defined hydroxy-terminated 4-arm polyethylene (PE) stars, which served as precursors for the synthesis of PE-based starblock copolymers.

Polyhomologation based on in situ generated boron-thexyl-silaboracyclic initiating sites: a novel strategy towards the synthesis of polyethylene-based complex architectures

Polyhomologation of dimethylsulfoxonium methylide using the in situ generated boron-thexyl-silaboracyclic initiating sites allows the synthesis of polyethylene-based complex macromolecular architectures.

Facile synthesis of chain end functionalized polyethylenes via epoxide ring-opening and thiol–ene addition click chemistry

A library of low MW chain end functionalized polyethylenes with narrow MW distributions were prepared under mild conditions.

Well-defined polyethylene molecular brushes by polyhomologation and ring opening metathesis polymerization

Well-defined polyethylene molecular brushes were synthesized, for the first time, by combining polyhomologation and ring opening metathesis polymerization (ROMP).