Preparation of polyHIPE via CuAAC “click” chemistry and its application as a highly efficient adsorbent of Cu(II) ions

Microporous Polyelectrolyte Complexes by Hydroplastic Foaming

Polyelectrolyte complexes (PECs) have emerged as an attractive category of materials for their water processability and some similarities to natural biopolymers. Herein, we employ the intrinsic hydroplasticity of PEC materials to enable the generation of porous structures with the aid of gas foaming. Such foamable materials are fabricated by simply mixing polycation, polyanion, and a UV-initiated chemical foaming agent in an aqueous solution, followed by molding into thin films. The gas foaming of the PEC films can be achieved upon exposure to UV illumination under water, where the films are plasticized and the gaseous products from the photolysis of foaming agents afford the formation, expanding, and merging of numerous bubbles. The porosity and morphology of the resulting porous films can be customized by tuning film composition, foaming conditions, and especially the degree of plasticizing effect, illustrating the high flexibility of this hydroplastic foaming method. Due to the rapid initiation of gas foaming, the present method enables the formation of porous structures via an instant one-step process, much more efficient than those existing strategies for porous PEC materials. More importantly, such a pore-forming mechanism might be extended to other hydroplastic materials (e.g., biopolymers) and help to yield hydroplasticity-based processing strategies.

Alginate-based porous polyHIPE for removal of single and multi-dye mixtures: Competitive isotherm and molecular docking studies

A novel hydrophilic porous alginate-based polyHIPE (AGA) was synthesized via an oil-in-water emulsion templating approach. AGA was used as an adsorbent for removing methylene blue (MB) dye in single- and multi-dye systems. BET, SEM, FTIR, XRD, and TEM were used to characterize AGA to elucidate its morphology, composition and physicochemical properties. According to the results, 1.25 g/L AGA adsorbed 99 % of 10 mg/L MB in 3 h in a single-dye system. The removal efficiency decreased to 97.2 % in the presence of 10 mg/L Cu2+ ions and 40.2 % when the solution salinity increased to 70 %. In a single-dye system, the experimental data do not match well with the Freundlich isotherm, pseudo-first order, and the Elovich kinetic model, however, in a multi-dye system, it fit well with both extended Langmuir and the Sheindorf-Rebhun-Sheintuch. Notably, AGA removed 66.87 mg/g in a dye solution containing only MB, whereas 50.14-60.01 mg/g adsorption of MB was accomplished in a multiple-dye system. According to the molecular docking analysis, the dye removal process involved chemical bonds between the functional groups of AGA and the dye molecules, hydrogen bonds, hydrophobic and electrostatic interactions. The overall binding score of MB decreased from -26.9 kcal/mol in a single-dye system to -18.3 kcal/mol in a ternary system.

Porous polycaprolactone and polycarbonate poly(urethane urea)s via emulsion templating: structures, properties, cell growth

Macroporous, emulsion-templated, linear poly(urethane urea) elastomers were synthesized from polyols (poly(ε-caprolactone)s or polycarbonates) and a diisocyanate. Growing cells adhered to the walls, spread, and penetrated into the porous structures.

Branched macromonomers from catalytic chain transfer polymerisation (CCTP) as precursors for emulsion-templated porous polymers

Catalytic chain transfer polymerisation (CCTP) is combined for the first time with emulsion-templating to generate polyHIPE materials where functionality and rigidity can be tightly tailored, broadening their scope of application.

Pickering emulsion-templated polymers: insights into the relationship between surfactant and interconnecting pores

Pickering high internal phase emulsions (HIPEs) using micron-size polymeric particles as stabilizer were developed. By adding a small amount of surfactant to the Pickering HIPEs, macroporous polymers with a well-define open-cell structure were synthesized with these HIPEs as templates. Owing to the micron-size of the particles, the particle locations could be observed directly by laser scanning confocal microscopy. It was found that the excess and attached particles aggregated and formed thick particle layers around the droplets when the HIPE was stabilized solely by particles. These thick particle layers were extremely stable, and did not easily rupture during or after polymerization, which caused the resulting polymers to have a closed-cell structure. When a small amount of surfactant was added, it was found that the surfactant disaggregated the particles, leaving them well-dispersed in the continuous phase. Moreover, the surfactant tended to occupy the oil-water interface at the contact point of adjacent droplets, where the interconnecting pores were hence likely to be formed after consolidation of the continuous phase. This observation confirmed experimentally the mechanism of interconnecting pore formation in Pickering-HIPE-templated porous polymers proposed theoretically in previous works.

Enzyme immobilized millimeter-sized polyHIPE beads with easy separability and recyclability

Enzyme immobilized reusable millimeter-sized beads were prepared through covalently immobilizing Candida antarctica lipase B onto emulsion-templated porous beads.

Recent advances in polymerizations in dispersed media

Advances in chemistry heterophase polymerizations reflect new developments in polymer chemistry. Although some few polymerization reactions cannot be performed in dispersed media, new polymerization reactions can still benefit from advantages of heterophase reactions, which are fast kinetics due to high local concentration of reagents and advantageous heat exchange. We describe here advances in heterophase polymerizations, with a focus on miniemulsion polymerization, which are mainly driven by academic interest for biomedicine and energy science. Click-reactions in dispersion are particularly interesting because they are bioorthogonals. Synthesis of highly crosslinked polymer colloids, especially with conjugated polymers, has found applications in gas storage, catalysis, and production of energy. Finally, we show how spatial segregation in heterophase polymerization can help to obtain polymer materials with unique structures.

Synthesis of Emulsion-Templated Magnetic Porous Hydrogel Beads and Their Application for Catalyst of Fenton Reaction

The pristine Fe₃O₄ nanoparticle (FeNP) is supposed to be a good catalyst of Fenton processes which have shown significant potential for water purification. Herein the magnetic macroporous hydrogel beads, having an open-cell structure, were synthesized by sedimentation polymerization of pristine FeNP stabilized oil-in-water high internal phase emulsions. The effects of the FeNP amount, internal phase fraction, and the costabilizer Tween85 concentration on the structure, such as interconnecting degree, void size, and its distribution of both the surface and inner of the beads, were investigated. With a methyl orange (MO) aqueous solution passing through a chromatography column that was filled with the FeNPs loaded hydrogel beads, the efficiency of these hydrogel beads as catalyst for Fenton reaction to decompose MO in water was tested. The MO was decomposed quickly at the first hour, followed by decomposed gradually in a further 5 h, and the decomposition rate of MO could be up to 99.6% at the end of the test. Moreover, MO decomposition rate remained over 98.2% in six batches which were run in the same beads filled column. The results showed that these FeNPs loaded porous hydrogel beads were reusable and highly efficient supporter for catalysis of Fenton reaction for decomposing organic pollutants in water.

Macroporous polymers prepared via frozen UV polymerization of the emulsion-templates stabilized by a low amount of surfactant

Macroporous polymers based on high internal phase emulsions (HIPEs) possess tunable porous structures and device shapes, and these characteristics make it possible for it to be applied in many fields. However, such materials also demonstrate undesirable properties, such as their brittleness and chalkiness, due to a great amount of surfactant required (5.0-50.0%, relative to the external phase) to realize the transformation from HIPEs to macroporous polymers (polyHIPEs). Herein, O/W HIPEs stabilized by a small amount (as low as 0.1 wt%, relative to the external phase) of commercial surfactant were prepared by magnetic stirring and subsequently homogenizing, and well-defined polyHIPEs were obtained through frozen UV polymerization of these HIPEs. In this process, the prepared HIPE was squeezed out by an injector and frozen at once, which effectively prevented the coalescence of internal phase. Then a 365 nm UV light was utilized to initiate the polymerization and the temperature was kept at -20 °C in order to avoid the melting of the frozen HIPE. After the polymerization, samples, having a typical polyHIPE structure, were obtained. Besides, the original monomer, surfactant and the oil (internal phase) were respectively replaced, and well-defined polyHIPEs could still be obtained. All the results suggested that frozen UV polymerization of HIPEs was an effective and universal approach to produce polyHIPEs with a low amount of surfactant.