Degradation of poly(β-amino ester) gels in alcohols through transesterification: A method to conjugate drugs to polymer matrices

mRNA Delivery: Challenges and Advances through Polymeric Soft Nanoparticles

Single-stranded messenger ribonucleic acid (mRNA) plays a pivotal role in transferring genetic information, and tremendous effort has been devoted over the years to utilize its transcription efficacy in therapeutic interventions for a variety of diseases with high morbidity and mortality. Lipid nanocarriers have been extensively investigated for mRNA delivery and enabled the rapid and successful development of mRNA vaccines against SARS-CoV-2. Some constraints of lipid nanocarriers have encouraged the development of alternative delivery systems, such as polymer-based soft nanoparticles, which offer a modular gene delivery platform. Such macromolecule-based nanocarriers can be synthetically articulated for tailored parameters including mRNA protection, loading efficacy, and targeted release. In this review, we highlight recent advances in the development of polymeric architectures for mRNA delivery, their limitations, and the challenges that still exist, with the aim of expediting further research and the clinical translation of such formulations.

Poly(curcumin β-amino ester)-Based Tablet Formulation for a Sustained Release of Curcumin

Oral drug delivery remains the most common and well tolerated method for drug administration. However, its applicability is often limited due to low drug solubility and stability. One approach to overcome the solubility and stability limitations is the use of amorphous polymeric prodrug formulations, such as poly(β-amino ester) (PBAE). PBAE hydrogels, which are biodegradable and pH responsive, have shown promising results for the controlled release of drugs by improving the stability and increasing the solubility of these drugs. In this work, we have evaluated the potential use of PBAE prodrugs in an oral tablet formulation, studying their sustained drug release potential and storage stability. Curcumin, a low solubility, low stability antioxidant drug was used as a model compound. Poly(curcumin β-amino ester) (PCBAE), a crosslinked amorphous network, was synthesized by a previously published method using a commercial diacrylate and a primary diamine, in combination with acrylate-functionalized curcumin. PCBAE-based tablets were made and exhibited a sustained release for 16 h, following the hydrolytic degradation of PCBAE particles into native curcumin. In addition to the release studies, preliminary storage stability was assessed using standard and accelerated stability conditions. As PCBAE degradation is hydrolysis driven, tablet stability was found to be sensitive to moisture.

Hydrogels and Hydrogel Nanocomposites: Enhancing Healthcare through Human and Environmental Treatment

Humans are constantly exposed to exogenous chemicals throughout their life, which can lead to a multitude of negative health impacts. Advanced materials can play a key role in preventing or mitigating these impacts through a wide variety of applications. The tunable properties of hydrogels and hydrogel nanocomposites (e.g., swelling behavior, biocompatibility, stimuli responsiveness, functionality, etc.) have deemed them ideal platforms for removal of environmental contaminants, detoxification, and reduction of body burden from exogenous chemical exposures for prevention of disease initiation, and advanced treatment of chronic diseases, including cancer, diabetes, and cardiovascular disease. In this review, three main junctures where the use of hydrogel and hydrogel nanocomposite materials can intervene to positively impact human health are highlighted: 1) preventing exposures to environmental contaminants, 2) prophylactic treatments to prevent chronic disease initiation, and 3) treating chronic diseases after they have developed.

Advances in laser-assisted conversion of polymeric and graphitic carbon into nanodiamond films

Nanodiamond (ND) synthesis by nanosecond laser irradiation has sparked tremendous scientific and technological interest. This review describes efforts to obtain cost-effective ND synthesis from polymers and carbon nanotubes (CNT) by the melting route. For polymers, ultraviolet (UV) irradiation triggers intricate photothermal and photochemical processes that result in photochemical degradation, subsequently generating an amorphous carbon film; this process is followed by melting and undercooling of the carbon film at rates exceeding 10⁹K s^-1. Multiple laser shots increase the absorption coefficient of PTFE, resulting in the growth of 〈110〉 oriented ND film. Multiple laser shots on CNTs result in pseudo topotactic diamond growth to form a diamond fiber. This technique is useful for fabricating 4-50 nm sized NDs. These NDs can further be employed as seed materials that are used in bulk epitaxial growth of microdiamonds using chemical vapor deposition, particularly for use with non-lattice matched substrates that formerly did not form continuous and adherent films. We also provide insights into biocompatible precursors for ND synthesis such as polybenzimidazole fiber. ND fabrication by UV irradiation of graphitic and polymeric carbon opens up a pathway for preparing selective coatings of polymer-diamond composites, doped nanodiamonds, and graphene composites for quantum computing and biomedical applications.

A novel MUC1 aptamer-modified PLGA-epirubicin-PβAE-antimir-21 nanocomplex platform for targeted co-delivery of anticancer agents in vitro and in vivo

Conventional chemotherapy suffers from several drawbacks, including toxic side effects together with the development of resistance to the chemical agents. Therefore, exploring alternative therapeutic approaches as well as developing targeted delivery systems are in demand. Oligonucleotide-based therapy has emerged as a promising and alternative procedure for treating malignancies involving gene-related diseases. In the current study, a targeted delivery system was designed to target cancer cells based on two biocompatible polymers of poly (β amino ester) (PβAE) and poly (d, l-lactide-co-glycolide) (PLGA). In this system, antimir-21 as an inhibitor of microRNA-21 (miR-21) which is an oncomiR overexpressed in several human cancers was condensed with PβAE polymer and then PLGA was electrostatically deposited on this complex and provided a reservoir for positively charged drug, epirubicin (Epi). At the final stage, MUC1 aptamer as a targeting agent was covalently attached to the nanoparticles for selectively guided therapeutic delivery. The obtained results demonstrated that the fabricated MUC1 aptamer-modified nanocomplex could efficiently be internalized into MCF7 (human breast carcinoma cell) and C26 (murine colon carcinoma cell) cells through interaction between MUC1 aptamer and its receptor on the surfaces of these cell lines and decline cell viability in these cells but not in CHO cells (Chinese hamster ovary cell) as nontarget cells (MUC1 negative cells). The safety of PLGA-Epi-PβAE-antimir-21 nanocomplex and synergetic effect of Epi and antimir-21 in reducing cell viability of target cells were confirmed by treating MCF-7 and CHO cells with nanocomplex and MUC1 aptamer-modified nanocomplex. Moreover, it was demonstrated that MUC1 aptamer-modified nanocomplex could remarkably inhibit tumor growth in tumor-bearing mice compared with Epi alone.

Investigation of tunable acetalated dextran microparticle platform to optimize M2e-based influenza vaccine efficacy

Influenza places a significant health and economic burden on society. Efficacy of seasonal influenza vaccines can be suboptimal due to poor matching between vaccine and circulating viral strains. An influenza vaccine that is broadly protective against multiple virus strains would significantly improve vaccine efficacy. The highly conserved ectodomain of matrix protein 2 (M2e) and 3'3' cyclic GMP-AMP (cGAMP) were selected as the antigen and adjuvant, respectively, to develop the basis for a potential universal influenza vaccine. The magnitude and kinetics of adaptive immune responses can have great impact on vaccine efficacy. M2e and cGAMP were therefore formulated within acetalated dextran (Ace-DEX) microparticles (MPs) of varying degradation profiles to examine the effect of differential vaccine delivery on humoral, cellular, and protective immunity. All Ace-DEX MP vaccines containing M2e and cGAMP elicited potent humoral and cellular responses in vivo and offered substantial protection against a lethal influenza challenge, suggesting significant vaccine efficacy. Serum antibodies from Ace-DEX MP vaccinated mice also demonstrated cross reactivity against M2e sequences of various viral strains, which indicates the potential for broadly protective immunity. Of all the formulations tested, the slowest-degrading M2e or cGAMP MPs elicited the greatest antibody production, cellular response, and protection against a viral challenge. This indicated the importance of flexible control over antigen and adjuvant delivery. Overall, robust immune responses, cross reactivity against multiple viral strains, and tunable delivery profiles make the Ace-DEX MP platform a powerful subunit vaccine delivery system.

Tunable degradation of acetalated dextran microparticles enables controlled vaccine adjuvant and antigen delivery to modulate adaptive immune responses

Subunit vaccines are often poorly immunogenic, and adjuvants and/or delivery vehicles, such as polymeric microparticles (MPs), can be used to enhance immune responses. MPs can also be used to understand cell activation kinetics and the significant impact antigen and adjuvant release has on adaptive immune responses. By controlling antigen and adjuvant release, we can determine if it is important to have precise temporal control over release of these elements to optimize the peak and duration of protective immunity and improve vaccine safety profiles. In order to study the effect of tunable adjuvant or antigen delivery on generation of adaptive immunity, we used acetalated dextran (Ace-DEX) MPs. Ace-DEX MPs were used because their tunable degradation can be controlled based on polymer cyclic acetal coverage (CAC). Ace-DEX MPs of varying degradation profiles were used to deliver murabutide or ovalbumin (OVA) as a model adjuvant or antigen, respectively. When murabutide was encapsulated within Ace-DEX MPs to test for controlled adjuvant delivery, fast-degrading MPs exhibited higher humoral and cellular responses in vivo at earlier time points, while slow-degrading MPs resulted in stronger responses at later time points. When OVA was encapsulated within Ace-DEX MPs to test for controlled antigen delivery, fast-degrading MPs induced greater antibody and cytokine production throughout the length of the experiment. This differential response suggests the need for distinct, flexible control over adjuvant or antigen delivery and its impact on immune response modulation.