Influence of Anionic Surfactants on the Fundamental Properties of Polymer/Reduced Graphene Oxide Nanocomposite Films

Surfactants are frequently employed in the fabrication of polymer/graphene-based nanocomposites via emulsion techniques. However, the impact of surfactants on the electrical and mechanical properties of such nanocomposite films remains to be explored. We have systematically studied the impact of two anionic surfactants [sodium dodecyl sulfate (SDS) and sodium dodecyl benzene sulfonate (SDBS)] on intrinsic properties of the nanocomposite films comprising reduced graphene oxide in a matrix of poly(styrene-stat-n-butyl acrylate). Using these ambient temperature film-forming systems, we fabricated films with different concentrations of the surfactants (1-7 wt %, relative to the organic phase). Significant differences in film properties were observed both as a function of amount and type of surfactant. Thermally reduced films exhibited concentration-dependent increases in surface roughness, electrical conductivity, and mechanical properties with increasing SDS content. When compared with SDBS, SDS films exhibited an order of magnitude higher electrical conductivity values at every concentration (highest value of ∼4.4 S m^-1 for 7 wt % SDS) and superior mechanical properties at higher surfactant concentrations. The present results illustrate how the simple inclusion of a benzene ring in the SDS structure (as in SDBS) can cause a significant change in the electrical and mechanical properties of the nanocomposite. Overall, the present results demonstrate how nanocomposite properties can be judiciously manipulated by altering the concentration and/or type of surfactant.

Flocculation of MXenes and Their Use as 2D Particle Surfactants for Capsule Formation

MXenes, transition metal carbides or nitrides, have gained great attention in recent years due to their high electrical conductivity and catalytic activity, hydrophilicity, and diverse surface chemistry. However, high hydrophilicity and negative ζ potential of the MXene nanosheets limit their processability and interfacial assembly. Previous examples for modifying the dispersibility and wettability of MXenes have focused on the use of organic ligands, such as alkyl amines, or covalent modification with triethoxysilanes. Here, we report a simple method to access MXene-stabilized oil-in-water emulsions by using common inorganic salts (e.g., NaCl) to flocculate the nanosheets and demonstrate the use of these Pickering emulsions to prepare capsules with shells of MXene and polymer. Ti₃C₂T_z nanosheets are used as the representative MXene. The salt-flocculated MXene nanosheets produce emulsions that are stable for days, as determined by optical microscopy imaging. The incorporation of a diisocyanate in the discontinuous oil phase and diamine in the continuous water phase led to interfacial polymerization and the formation of capsules. The capsules were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), confirming the presence of both polymer and nanosheets. The addition of ethanol to the capsules led to the removal of the toluene core and retention of the shell structure. The ability to assemble MXene nanosheets at fluid-fluid interfaces without the use of ligands or cosurfactants expands the accessible material constructs relevant for biomedical engineering, water purification, energy storage, electromagnetic electronics, catalysis, and so on.

Preparation of Methacrylate Polymer/Reduced Graphene Oxide Nanocomposite Particles Stabilized by Poly(ionic liquid) Block Copolymer via Miniemulsion Polymerization

Poly(n-butyl methacrylate) (PnBMA)/reduced graphene oxide (rGO) nanocomposite films are prepared using two different routes. The first route involves preparation of PnBMA nanoparticles containing homogeneously dispersed rGO nanosheets by miniemulsion polymerization using a block copolymer of ionic liquid (IL) monomer and nBMA. The IL units act as adsorption sites for rGO whereas BMA units provide solubility in the BMA monomer droplets. Nanocomposite films obtained from miniemulsion polymerization exhibit higher tensile modulus in comparison with the films prepared by mixing a PnBMA emulsion and aqueous graphene oxide (GO) dispersion. The second route involves preparation of PnBMA particles armored with rGO nanosheets via miniemulsion polymerization using the same poly(ionic liquid) (PIL) block copolymer. An anionic exchange reaction is conducted to obtain more hydrophilic PIL units in the block copolymer, thus providing adsorption sites of GO nanosheets at the interface of the polymer particles. Subsequent chemical reduction of GO to rGO using hydrazine monohydrate results in formation of a PnBMA/rGO nanocomposite. The resulting nanocomposite film exhibits electrical conductivity (2.0 × 10^-3 S m^-1).

Synthesis of diamine functionalised graphene oxide and its application in the fabrication of electrically conducting reduced graphene oxide/polymer nanocomposite films

The focus of research in diamine functionalised graphene oxide (GO) has been limited to the use of diamines either as crosslinker or to achieve simultaneous functionalisation, reduction and stitching of GO sheets, especially in the case of ethylene diamine (EDA). Controlling the extent of stitching and functionalisation has to date remained a challenge. In particular, synthesis of colloidally stable monofunctionalised GO-NH2 with dangling amine groups using diamines has remained elusive. This has been the limiting factor towards the utility of EDA functionalised GO (GO-NH2) in the field of polymer-based nanocomposites. We have synthesised colloidally stable GO-NH2 with dangling amine groups and subsequently demonstrated its utility as a surfactant to synthesize colloidally stable waterborne polymer nanoparticles with innate affinity to undergo film formation at room temperature. Thermally annealed dropcast polymer/GO-NH2 nanocomposite films exhibited low surface roughness (∼1 μm) due to the homogeneous distribution of functionalised GO sheets within the polymer matrix as observed from confocal laser scanning microscopy, scanning electron microscopy and transmission electron microscopy. The films exhibited considerable electrical conductivity (∼0.8 S m-1), demonstrating the potential of the GO-NH2/polymer nanocomposite for a wide range of applications.

Miniemulsion polymerization of styrene using carboxylated graphene quantum dots as surfactant

Carboxylated graphene quantum dots (cGQDs) were synthesized from dextrose and sulfuric acid via a hydrothermal process, and subsequently used as sole surfactant in miniemulsion polymerization of styrene.

Miniemulsion polymerization using carboxylated graphene quantum dots as surfactants: effects of monomer and initiator type

The effectiveness of carboxylated graphene quantum dots (cGQDs) as sole surfactants have been investigated in miniemulsion polymerization of 8 different vinyl monomers, initiated by oil-soluble initiator AIBN and water-soluble initiator VA-044.

Ambient-Temperature Waterborne Polymer/rGO Nanocomposite Films: Effect of rGO Distribution on Electrical Conductivity

Electrically conductive polymer/rGO (reduced graphene oxide) films based on styrene and n-butyl acrylate are prepared by a variety of aqueous latex based routes involving ambient temperature film formation. Techniques based on miniemulsion polymerization using GO as surfactant and "physical mixing" approaches (i.e., mixing an aqueous polymer latex with an aqueous GO dispersion) are employed, followed by heat treatment of the films to convert GO to rGO. The distribution of GO sheets and the electrical conductivity depend strongly on the preparation method, with electrical conductivities in the range 9 × 10^-4 to 3.4 × 10² S/m. Higher electrical conductivities are obtained using physical mixing compared to miniemulsion polymerization, which is attributed to the former providing a higher level of self-alignment of rGO into larger linear domains. The present results illustrate how the distribution of GO sheets within these hybrid materials can to some extent be controlled by judicious choice of preparation method, thereby providing an attractive means of nanoengineering for specific potential applications.

Electrically conductive polymer/rGO nanocomposite films at ambient temperature via miniemulsion polymerization using GO as surfactant

We have developed a facile and industrially scalable method to synthesize colloidally stable polymer nanoparticles decorated with graphene oxide (GO) sheets via miniemulsion polymerization, which in turn enables the preparation of electrically conductive films using a simple dropcasting method at ambient temperature. The resulting nanocomposite films exhibited high electrical conductivity with a wide range of potential applications as conductive coatings.

Recent advances in colloidal nanocomposite designviaheterogeneous polymerization techniques

Recent advances in colloidal nanocomposite design by heterogeneous polymerization are reviewed, with a specific focus on encapsulation and particle-based stabilization for specific materials applications.

Pickering miniemulsion polymerization using graphene oxide: effect of addition of a conventional surfactant

Polystyrene/graphene oxide (PSt/GO) nanocomposite latexes have been prepared by Pickering miniemulsion polymerization in the presence of the conventional surfactant sodium dodecyl sulfate (SDS) in order to investigate its influence on the polymerization mechanism.